PAVEMENT AND MATERIALS Sample Clauses

PAVEMENT AND MATERIALS. Program Overview
AutoNDA by SimpleDocs
PAVEMENT AND MATERIALS. Pavement design: Road pavements shall be of the flexible type (asphalt concrete surfaces and aggregate bases). The design shall be based on the "AASHTO Guide for Design of Pavement Structures". Other methods may be used subject to the approval of the Employer. The pavements layers shall include the following: ✔ Wearing layer a minimum thickness of 6 cm. ✔ Binder layer a minimum thickness of 7 cm. ✔ Base layer a minimum thickness of 20 cm. ✔ Subbase layer a minimum thickness of 20 cm. ✔ Topping layer a minimum thickness of 30 cm, (According to MPWH specification).

Related to PAVEMENT AND MATERIALS

  • Equipment and Materials CONTRACTOR shall provide all equipment, materials, and supplies necessary for the performance on the Agreement except:

  • Personnel Equipment and Material Engineer shall furnish and maintain, at its own expense, quarters for the performance of all Engineering Services, and adequate and sufficient personnel and equipment to perform the Engineering Services as required. All employees of Engineer shall have such knowledge and experience as will enable them to perform the duties assigned to them. Any employee of Engineer who, in the reasonable opinion of County, is incompetent or whose conduct becomes detrimental to the Engineering Services shall immediately be removed from association with the Project when so instructed by County. Engineer certifies that it presently has adequate qualified personnel in its employment for performance of the Engineering Services required under this Contract, or will obtain such personnel from sources other than County. Engineer may not change the Project Manager without prior written consent of County.

  • LABOR AND MATERIALS 4.4.1 Unless otherwise provided in the Contract Documents, the Contractor shall provide and pay for all labor, materials, equipment, tools, construction equipment and machinery, water, heat, utilities, transportation, and other facilities and services necessary for the proper execution and completion of the Work, whether temporary or permanent and whether or not incorporated or to be incorporated in the Work. Contractor guarantees that materials shall be of the best quality, that work shall be completed in a neat and workmanlike manner, that equipment will be installed in a first class manner, and that all aspects of the project will be delivered in good working order complete and perfect in every respect and that all systems and materials necessary to make the project a complete operating utility as contemplated by the above description of the project is included in the Contract price. 4.4.2 The Contractor shall a t all times enforce strict discipline and good order among his employees and shall not employ on the Work any unfit person or anyone not skilled in the task assigned to him.

  • Time and Materials If this contract is designated as a Time and Materials contract, invoicing and payment shall be as follows: (a) Consultant shall submit invoices, not more often than once a month during the term of this agreement, based on the cost for work performed in accordance with the Rate Schedule in the Scope of Work and authorized reimbursable expenses incurred prior to the invoice date. Invoices shall contain the following information: (i) Serial identifications of bills, i.e., Xxxx No. 1; (ii) The beginning and ending dates of the billing period; (iii) A summary containing the total contract amount, the amount of prior xxxxxxxx, the total due this period, percentage of work completed, the remaining balance available for all remaining billing periods, and a brief description of work completed during the billing period. (b) City shall make monthly payments, based on such invoices, for satisfactory progress in completion of the Scope of Work, and for authorized reimbursable expenses incurred.

  • Licensed Materials The materials that are the subject of this Agreement are set forth in Appendix A ("Licensed Materials").

  • DOCUMENTS AND MATERIALS CONTRACTOR shall maintain and make available to COUNTY for its inspection and use during the term of this Agreement, all Documents and Materials, as defined in Paragraph 9 of this Agreement. CONTRACTOR’s obligations under the preceding sentence shall continue for four

  • Construction materials (1) The restrictions of section 1605 of the American Recovery and Reinvestment Act of 2009 (Pub. L. 111-5) (Recovery Act) do not apply to Recovery Act designated country manufactured construction material. The restrictions of the Buy American statute do not apply to designated country unmanufactured construction material. Consistent with U.S. obligations under international agreements, this clause implements--

  • Stored Materials The Department shall not be required to pay for materials stored at the site or stored at other locations absent prior written authorization to do so, which authorization may be withheld at the Department's sole discretion. If the Department expressly agrees to pay for materials stored at the site but not yet incorporated into the Work, the Application for Payment may also include a request for payment of the cost of such materials, if the materials have been delivered to the site, and suitably stored. Such requests shall be documented by appropriate invoices and bills of sale. Payment for stored materials shall be conditioned also on the Design-Builder’s representation that it has inspected the material and found it to be free from defect and otherwise in conformity with this Agreement, and on satisfactory evidence that the materials are insured under the builder’s risk policy. Further, if the Design-Builder requests the Department to allow payments for storage of materials offsite, the Design-Builder shall be required, inter alia, to agree to execution of proper documentation to afford the Department a secured interest in the materials upon payment.

  • WORKMANSHIP AND MATERIALS 1.10.1 Contractor shall furnish all supervision, labor, transportation, materials, tools and equipment necessary to satisfactorily complete the service in a manner consistent with the Project Manager’s plan and schedule. Contractor’s equipment shall be of the size and type appropriate for completing the various types of work described in the contract or any associating Purchase Order. Contractor shall ensure that any equipment considered by the Project Manager to be improper or inadequate for this purpose is removed from the site and replaced with satisfactory equipment. 1.10.2 All work performed under this contract shall be completed in accordance with local, state, and national codes and standards, and other recognized industry standards associated with the work. 1.10.3 The Contractor guarantees that all materials shall be of the best quality, that all work shall be done in a professional manner, and that all aspects of the project will be delivered in good working order, complete and perfect in every respect, and that all systems and materials necessary to make the project completely operational as contemplated by the above description of the project, even if those systems and materials are not specifically described in this Contract, shall be included in the contract price. 1.10.4 Contractor shall ensure that all supplies, equipment and machines shall be kept free of traffic lanes or other areas that may be hazardous. Contractor shall further ensure that all dirt and debris resulting from the work under this contract shall be disposed of at the end of each day or at the completion of work in each building. 1.10.5 Contractor shall, at no additional cost to the State, repair furnishings, equipment, facilities or other property of the State damaged by Contractor, its officers, employees, agents, contractors, subcontractors and invitees. Contractor acknowledges that the determination of the need for, and extent of, any repair work shall be made at the sole discretion of the Project Manager.

  • Inventions and Improvements The Executive acknowledges that all ideas, discoveries, inventions and improvements which are made, conceived or reduced to practice by the Executive and every item of knowledge relating to the Company’s business interests (including potential business interests) gained by the Executive during the Employment Term are the sole and absolute property of the Company, and the Executive shall promptly disclose and hereby irrevocably assigns all his right, title and interest in and to all such ideas, discoveries, inventions, improvements and knowledge to the Company for its sole use and benefit, without additional compensation, and shall communicate to the Company, without cost or delay, and without publishing the same, all available information relating thereto. The Executive also hereby waives all claims to moral rights in any such ideas, discoveries, inventions, improvements and knowledge. The provisions of this Section 7 shall apply whether such ideas, discoveries, inventions or knowledge are conceived, made, gained or reduced to practice by the Executive alone or with others, whether during or after usual working hours, whether on or off the job, whether applicable to matters directly or indirectly related to the Company’s business interests (including potential business interests), and whether or not within the specific realm of the Executive’s duties. Any of the Executive’s ideas, discoveries, inventions and improvements relating to the Company’s business interests or potential business interests and conceived, made or reduced to practice during the Severance Period shall for the purpose of this Agreement, be deemed to have been conceived, made or reduced to practice before the end of the Employment Term. The Executive shall, upon request of the Company, and without further compensation by the Company but at the expense of the Company, at any time during or after his employment with the Company, sign all instruments and documents requested by the Company and otherwise cooperate with the Company and take any actions which are or may be necessary to protect the Company’s right to such ideas, discoveries, inventions, improvements and knowledge, including applying for, obtaining and enforcing patents, copyrights and trademark registrations thereon in any and all countries. To the extent this section shall be construed in accordance with the laws of any state which precludes a requirement to assign certain classes of inventions made by an employee, this Section shall be interpreted not to apply to any invention which a court rules and/or the Company agrees falls within such classes.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!