Plastering and similar in-situ finishing and backings Sample Clauses

Plastering and similar in-situ finishing and backings. All plastering shall be executed in a neat workmanlike manner. All faces except circular work shall be true and flat and angles shall be straight and level or plumb. Plastering shall be neatly made good up to metal or wooden frames and skirting and around pipes or fittings. Angles shall be rounded to 5 mm radius. Surfaces of undercoats shall be well scratched to provide a key for finishing coats. Screed marks or making good on undercoats shall not show through the finishing coats. Surfaces described as trowelled smooth shall be finished with a steel trowel to a smooth flat surface free from trowel marks. Surfaces described as floated shall be finished with a wooden or felt float to a flat surface free from trowel marks. All tools, implements, vessels and surfaces shall at all times be kept scrupulously clean and strict precautions shall be taken to prevent the plaster or other materials from being contaminated by pieces of partially set material which would tend to retard or accelerate the setting time. Coating work shall not be started until all:
Sample 1
AutoNDA by SimpleDocs
Plastering and similar in-situ finishing and backings. ‌ TS-401 All plastering shall be executed in a neat workmanlike manner. All faces except circular work shall be true and flat and angles shall be straight and level or plumb. TS-402 Plastering shall be neatly made good up to metal or wooden frames and skirting and around pipes or fittings. Angles shall be rounded to 5mm radius. TS-403 Surfaces of undercoats shall be well scratched to provide a key for finishing coats. Screed marks or making good on undercoats shall not show through the finishing coats. TS-404 Surfaces described as troweled smooth shall be finished with a steel trowel to a smooth flat surface free from trowel marks. TS-405 Surfaces described as floated shall be finished with a wooden or felt float to a flat surface free from trowel marks. TS-406 All tools, implements, vessels and surfaces shall at all times be kept scrupulously clean and strict precautions shall be taken to prevent the plaster or other materials from being contaminated by pieces of partially set material which would tend to retard or accelerate the setting time. TS-407 Coating work shall not be started until all:
Sample 1

Related to Plastering and similar in-situ finishing and backings

  • Cutting and Patching The Contractor shall be responsible for cutting, fitting or patching required to complete the Work or to make its parts fit together properly.

  • Switching and Tagging Rules Each Party shall provide the other Parties a copy of its switching and tagging rules that are applicable to the other Parties’ activities. Such switching and tagging rules shall be developed on a non-discriminatory basis. The Parties shall comply with applicable switching and tagging rules, as amended from time to time, in obtaining clearances for work or for switching operations on equipment.

  • Reactive Power and Primary Frequency Response 9.6.1 Power Factor Design Criteria

  • Bullying and Harassment Neither DFMC nor you will engage in behaviour that is, or may be reasonably considered to be, intimidating, bullying or harassing or commit any act or behaviour which is offensive or abusive in connection with this Contract. If you are in breach of this clause, DFMC may suspend the collection of your milk for a period of 5 days or until such time as DFMC determines (acting reasonably) that the behaviour has been rectified.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!