Packing Materials and Containers for Shipment Packing materials and containers in which the good is packed for shipment shall be disregarded in determining whether--
(i) the non-originating materials used in the production of the good undergo an applicable change in tariff classification set out in subdivision (t) of this note; and
(ii) the good satisfies a regional value-content requirement.
Instructions for Operators This agreement is intended to be provided to an Operator from a LEA. The Operator should fully read the agreement and is requested to complete the below areas of the agreement. Once the Operator accepts the terms of the agreement, the Operator should wet sign the agreement and return it to the LEA. Once the LEA signs the agreement, the LEA should provide a signed copy of the agreement to the Operator. Cover Page Box # 3 Official Name of Operator Cover Page Box # 4 Date Signed by Operator Recitals Box #5 Contract Title for Service Agreement Recitals Box #6 Date of Service Agreement Article 7 Boxes #7-10 Operator’s designated representative Signature Page Boxes #15-19 Authorized Operator’s representative signature Exhibit A Box #25 Description of services provided Exhibit B All Applicable Boxes Operator notates if data is collected to provide the described services. Defines the schedule of data required for the Operator to provide the services outlined in Exhibit A Exhibit D All Applicable Boxes (Optional Exhibit): Defines deletion or return of data expectations by LEA Exhibit E All Applicable Boxes (Optional Exhibit): Operator may, by signing the Form of General Offer of Privacy Terms (General Offer, attached as Exhibit E), be bound by the terms of this DPA to any other Subscribing LEA who signs the acceptance in said Exhibit. Exhibit F Boxes # 25-29 A list of all Subprocessors used by the Operator to perform functions pursuant to the Service Agreement, list security programs and measures, list Operator’s security measures
Packaging Materials and Containers for Retail Sale 1. When packaging materials and containers in which a good is packaged for retail sales are classified in the Harmonized System with the good, they shall not be taken into account in determining whether all non-originating materials used in the production of the good undergo the applicable change in tariff classification set out in Annex 4.03.
2. When the good is subject to a requirement of regional value content, the value of these packaging materials and containers shall be taken into account as originating or non-originating materials, as the case may be, in calculating the regional value content of the good.
Payments for Consent The Company will not, and will not permit any of its Restricted Subsidiaries to, directly or indirectly, pay or cause to be paid any consideration to or for the benefit of any Holder of Notes for or as an inducement to any consent, waiver or amendment of any of the terms or provisions of this Indenture or the Notes unless such consideration is offered to be paid and is paid to all Holders of the Notes that consent, waive or agree to amend in the time frame set forth in the solicitation documents relating to such consent, waiver or agreement.
Preconditions The payment of any amounts due under this Section 7 and Section 8 below, if applicable, shall be subject to and conditioned upon prior receipt by the Corporation of a separation agreement containing a valid waiver and release by Executive, in a form provided by the Corporation, of any and all claims Executive may have against the Corporation, the Bank and their Affiliates, or their then current or former officers, directors, or employees. Further, Executive must reaffirm and comply with the restrictions contained in Sections 13-16 this Agreement which survive termination of employment.
Conditions for Closing The Lender shall not be obligated to disburse the Bridge Loan until the Borrower shall have fulfilled and/or furnished to the Lender, at the Borrower’s own cost and expense, the following conditions (unless waived in writing by Lender):
(a) The Loan Documents duly executed by the Borrower and each Guarantor (as applicable) along with evidence that all financing statements and other filings contemplated thereby have been made and the Security Documents to be placed of record or filed shall have been duly executed and recorded and filed in all appropriate offices and shall constitute a first and prior Lien on the Collateral, subject only to those matters set forth in Section 6.01 of this Agreement and all taxes, fees and charges in connection therewith shall have been paid.
(b) Evidence, in form and substance satisfactory to the Lender, that the Aircraft, business and all assets of the Borrower are adequately insured as required by Section 5.04.
(c) Payment of the Origination Fee and all reimbursable costs and expenses pursuant to the Loan Documents, together with evidence of payment to other parties of all fees and costs which Borrower is required under the Loan Documents to pay by the Closing Date.
(d) Lien searches (including Uniform Commercial Code, judgments, bankruptcy and taxes) with respect to the Borrower and each Guarantor (at the state and county level) from the jurisdiction of its organization and each other jurisdiction in which it maintains an office, including the home airport of the Aircraft, (i) showing no existing Liens on the Collateral pledged by such Persons except as permitted hereunder or (ii) accompanied by necessary termination statements, release statements and any other types of release in connection with any impermissible Liens disclosed by such searches that have been filed or for which satisfactory arrangements have been made for such filing on the Closing Date.
(e) With respect to the Aircraft, (i) an FAA and International Registry lien and title search acceptable to the Lender, (ii) a copy of Aircraft Registration Certificate, (iii) lien and title searches of the applicable Canadian government authorities, including without limitation under the Personal Property Security Act, in form acceptable to the Lender, (iv) evidence that the Borrower has become a Transaction User Entity (as defined in the International Registry) and appointed an administrator and a professional registry user entity, in form and substance satisfactory to the Lender, (v) reasonable evidence that the Aircraft is eligible for prompt issuance of a U.S. Certificate of Airworthiness following the Aircraft’s transfer of title to Borrower, (vi) Completed Customs and Border Protection Forms 7501 and 3461 evidencing importation into the U.S., and (vii) a copy of the airframe, engine, and avionics maintenance programs.
(f) Copies of all of the Aircraft Contracts in effect as of the Closing Date, in form and substance reasonably acceptable to the Lender.
(g) A copy of the Borrower’s and each Guarantor’s organizational documents, in form and substance satisfactory to the Lender.
(h) A certificate of existence, authorization, good standing certificate, or its equivalent of each of the Borrower and the Guarantor from the Secretary of State of such Person’s jurisdiction of incorporation/formation/organization and the Secretary of State of each other jurisdiction in which such Person is qualified to do business as a foreign corporation/company/partnership, if any.
(i) A certificate in form and substance satisfactory to Lender from the Borrower and each Guarantor, dated the Closing Date and signed on behalf of such Person by an authorized member/manager/officer of such Person certifying as to (i) true copies of the organizational documents of such Person and any amendments thereto, (ii) the resolutions of the directors/managers and/or shareholders/members (as the case may be) of such Person authorizing the execution and delivery of this Agreement and the other Loan Documents to which it is a party and (iii) the names, true signatures and incumbency of the members/managers/officers of such Person authorized to execute and deliver the Loan Documents to which it is a party. The Lender may conclusively rely on such certification unless and until a later certificate revising the prior certificate has been furnished to the Lender.
(j) A certification regarding the beneficial ownership of the Borrower, as required by the Bank Secrecy Act (31 C.F.R. §1010.230 et. seq.), as amended from time to time, the regulations promulgated thereunder, and any successor statute, in form and substance satisfactory to the Lender.
(k) Evidence, in form and substance acceptable to the Lender, that the Borrower has a tangible balance sheet equity of at least twenty percent (20%) on the Closing Date.
(l) An opinion of counsel on behalf of the Borrower and the Guarantor, dated the Closing Date, in form and substance satisfactory to the Lender in absolute discretion.
(m) An opinion of special FAA counsel, including an International Registry Priority Search Certificate, each dated the Closing Date, in form and substance satisfactory to the Lender in absolute discretion.
(n) Listing of furniture, fixtures and equipment owned by the Borrower or a certification that the Borrower does not own any, satisfactory in form and content to the Lender, indicating that the estimated value of such furniture, fixtures and equipment.
(o) An inventory of all Warranties (including copies all documentation with respect thereto) relating to the Aircraft.
(p) The Borrower shall have executed and delivered all forms, documentation and information necessary for the establishment of the Cash Collateral Account at Lender, and shall have funded the Cash Collateral into the Cash Collateral Account (either prior to the Closing Date or contemporaneously therewith).
(q) Such other instruments, documents, certificates, assurances and opinions as may be set forth in the preliminary closing checklist delivered to the Borrower in connection with this Agreement or as the Lender shall reasonably require to evidence and secure the Loan, to comply with the provisions hereof and the requirements of regulatory authorities to which the Lender is subject, all of which, including those referred to above in this Section 4.01 shall be satisfactory in form, content and substance to the Lender.
Certain State Law Requirements for Contracts The contents of this Section are required by Texas Law and are included by County regardless of content. For purposes of Sections 2252.152, 2271.002, and 2274.002, Texas Government Code, as amended, C&T hereby verifies that C&T and any parent company, wholly owned subsidiary, majority-owned subsidiary, and affiliate:
a. Unless affirmatively declared by the United States government to be excluded from its federal sanctions regime relating to Sudan or Iran or any federal sanctions regime relating to a foreign terrorist organization, is not identified on a list prepared and maintained by the Texas Comptroller of Public Accounts under Sections 806.051, 807.051, or 2252.153 of the Texas Government Code.
b. If employing ten (10) or more full-time employees and this Agreement has a value of
Time for Completion The Contractor shall deliver the material and/or services called for in the specifications/proposal and within the delivery time specified and in accordance with the terms of the contract. Work shall be completed within 30 days from the Notice to Proceed issued by the City of Sparks Purchasing Division. The Contractor shall not alter or vary any terms or conditions contained or incorporated herein, including but not limited to, the quantity, price, delivery date or date designated as After Receipt of Order (ARO) or date for commencement or completion of services as mutually agreed upon, unless such alteration or variation is consented to in writing by a duly authorized representative of the City. The City reserves the right to cancel resultant Contract upon ten days written notice in the event the type and quality of the product or work performance is unsatisfactory or in default, subject to Contractor’s right to cure as outlined in termination clause. This is a non-exclusive Contract and the City reserves the right to acquire the material and/or services at its discretion, from other sources during the term of this Contract.
Solicitations for Subcontracts, Including Procurement of Materials and Equipment In all solicitations either by competitive bidding or negotiation made by the Local Government for work to be performed under a subcontract, including procurement of materials or leases of equipment, each potential subcontractor or supplier will be notified by the Local Government of the Local Government’s obligations under this Agreement and the Acts and Regulations relative to Nondiscrimination on the grounds of race, color, or national origin.
Applications for Payment 9.3.1 At least ten days before the date for each progress payment established in the State- Contractor Agreement, the Contractor shall submit to the Architect an itemized Application for Payment, notarized if required, supported by such data substantiating the Contractor's right to payment as the State or the Architect may require. The application for payment must, at a minimum, reflect retainage and the required waivers of lien and any other support documentation enumerated elsewhere in the Contract Documents.
9.3.2 Unless otherwise provided in the Contract Documents, payments will be made on account of materials or equipment not incorporated in the Work but delivered and suitably stored at the site and, if approved in advance by the State, payments may similarly be made for materials or equipment suitably stored at some other location agreed upon in writing. Payments for materials or equipment stored on or off the site shall be conditioned upon submission by the Contractor of bills of sale or such other procedures satisfactory to the State to establish the State's title to such materials or equipment or otherwise protect the State's interest, including applicable insurance and transportation to the site for those materials and equipment stored off the site.
9.3.3 The Contractor warrants that title to all Work, materials and equipment covered by an Application for Payment will pass to the State either by incorporation in the construction or upon the receipt of payment by the Contractor, whichever occurs first, free and clear of all liens, claims, security interests or encumbrances, hereinafter referred to in this Article 9 as "liens"; and that no Work, materials or equipment covered by an Application for Payment will have been acquired by the Contractor, or by any other person performing Work at the site or furnishing materials and equipment for the Project, subject to an agreement under which an interest therein or an encumbrance thereon is retained by the seller or otherwise imposed by the Contractor or such other person.
