Common use of Product Identification Clause in Contracts

Product Identification. Before removal from Sale Area, unless Contracting Officer determines that circumstances warrant a written waiver or adjustment, Purchaser shall: (a) Hammer brand all products that are eight (8) feet or more in length and one-third (1/3) or more sound, on each end that is seven (7) inches or more in diameter. (b) West of the 100th meridian, paint with a spot of highway-yellow paint all domestic processing products that are eight (8) feet or more in length and one-third (1/3) or more sound, on each end that is seven (7) inches or more in diameter. Each paint spot must be not less than three (3) square inches in size. Contracting Officer shall assign brands and, if Sale Area is within a State that maintains a log brand register, brands shall be registered with the State. Purchaser shall use assigned brand exclusively on logs from this sale un- til Contracting Officer releases brand. Purchaser will fur- nish and apply highway-yellow paint of a lasting quality (oil-base or equivalent). All hammer brands and/or highway-yellow paint must remain on logs until they are domestically processed. Purchaser shall replace identifying marks if they are lost, removed, or become unreadable. Purchaser may re- manufacture products into different log lengths. Except for logs remanufactured as part of the mill in-feed process immediately before processing, remanufactured products must be rebranded with the assigned timber sale brand and repainted with highway-yellow paint, unless other- wise agreed to in writing by Contracting Officer. For such remanufactured products, Contracting Officer may ap- prove use of a brand to be used exclusively as a catch brand, in lieu of the assigned timber sale brand.

Product Identification. Before removal from Sale Contract Area, unless Contracting Officer determines deter- mines that circumstances warrant a written waiver or adjustment, Purchaser Contractor shall: (a) Hammer brand all products that are eight (8) feet or more in length and one-third (1/3) or more sound, on each end that is seven (7) inches or more in diameter. (b) West of the 100th meridian, paint with a spot of highway-yellow paint all domestic processing products that are eight (8) feet or more in length and one-third (1/3) or more sound, on each end that is seven (7) inches or more in diameter. Each paint spot must be not less than three (3) square inches in size. Contracting Officer shall assign brands and, if Sale Contract Area is within a State that maintains a log brand register, brands shall be registered with the State. Purchaser Contractor shall use assigned brand exclusively on logs from this sale un- til contract until Contracting Officer releases brand. Purchaser Contractor will fur- nish furnish and apply highway-yellow paint of a lasting quality (oil-oil- base or equivalent). All hammer brands and/or highway-yellow paint must remain on logs until they are domestically processed. Purchaser Con- tractor shall replace identifying marks if they are lost, removed, or become unreadable. Purchaser Contractor may re- manufacture remanufacture products into different log lengths. Except for logs remanufactured as part of the mill in-feed process immediately before be- fore processing, remanufactured products must be rebranded with the assigned timber sale contract brand and repainted with highway-yellow paint, unless other- wise otherwise agreed to in writing by Contracting Officer. For such remanufactured products, Contracting Officer may ap- prove approve use of a brand to be used exclusively as a catch brand, in lieu of the assigned timber sale con- tract brand.

Product Identification. Before For contracts west of the 100th meridian, before removal from Sale Contract Area, unless Contracting Officer determines that circumstances warrant a written waiver or adjustment, Purchaser Contractor shall: (a) Hammer brand all products that are eight (8) feet or more in length and one-third (1/3) or more sound, on each end that is seven (7) inches or more in diameter.on (b) West of the 100th meridian, paint with a spot of highway-yellow paint all domestic processing products that are eight (8) feet or more in length and one-third (1/3) or more sound, on each end that is seven (7) inches or more in diameter. Each paint spot must be not less than three (3) square inches in size. Contracting Officer shall assign brands and, if Sale Contract Area is within a State that maintains a log brand register, brands shall be registered with the State. Purchaser Contractor shall use assigned brand exclusively on logs from this sale un- til contract until Contracting Officer releases brand. Purchaser Contractor will fur- nish furnish and apply highway-yellow paint of a lasting quality (oil-oil- base or equivalent). All hammer brands and/or highway-yellow paint must remain on logs until they are domestically processed. Purchaser Con- tractor shall replace identifying marks if they are lost, removed, or become unreadable. Purchaser Contractor may re- manufacture remanufacture products into different log lengths. Except for logs remanufactured as part of the mill in-feed process immediately before be- fore processing, remanufactured products must be rebranded with the assigned timber sale contract brand and repainted with highway-yellow paint, unless other- wise otherwise agreed to in writing by Contracting Officer. For such remanufactured products, Contracting Officer may ap- prove approve use of a brand to be used exclusively as a catch brand, in lieu of the assigned timber sale con- tract brand.

Product Identification. Before For contracts west of the 100th meridian, before removal from Sale Contract Area, unless Contracting Officer determines that circumstances warrant a written waiver or adjustment, Purchaser Contractor shall: (a) Hammer brand all products that are eight (8) feet or more in length and one-third (1/3) or more sound, on each end that is seven (7) inches or more in diameter. (b) West of the 100th meridian, paint with a spot of highway-yellow paint all domestic processing products that are eight (8) feet or more in length and one-third (1/3) or more sound, on each end that is seven (7) inches or more in diameter. Each paint spot must be not less than three (3) square inches in size. Contracting Officer shall assign brands and, if Sale Contract Area is within a State that maintains a log brand register, brands shall be registered with the State. Purchaser Contractor shall use assigned brand exclusively on logs from this sale un- til contract until Contracting Officer releases brand. Purchaser Contractor will fur- nish furnish and apply highway-yellow paint of a lasting quality (oil-oil- base or equivalent). All hammer brands and/or highway-yellow paint must remain on logs until they are domestically processed. Purchaser Con- tractor shall replace identifying marks if they are lost, removed, or become unreadable. Purchaser Contractor may re- manufacture remanufacture products into different log lengths. Except for logs remanufactured as part of the mill in-feed process immediately before be- fore processing, remanufactured products must be rebranded with the assigned timber sale contract brand and repainted with highway-yellow paint, unless other- wise otherwise agreed to in writing by Contracting Officer. For such remanufactured products, Contracting Officer may ap- prove approve use of a brand to be used exclusively as a catch brand, in lieu of the assigned timber sale con- tract brand.

Product Identification. Before For timber sales west of the 100th meridian, before removal from Sale Area, unless Contracting Officer determines that circumstances warrant a written waiver or adjustment, Purchaser shall: (a) Hammer brand all products that are eight (8) feet or more in length and one-third (1/3) or more sound, on each end that is seven (7) inches or more in diameter. (b) West of the 100th meridian, paint Paint with a spot of highway-yellow paint all domestic processing products that are eight (8) feet or more in length and one-third (1/3) or more sound, on each end that is seven (7) inches or more in diameter. Each paint spot must be not less than three (3) square inches in size. Contracting Officer shall assign brands and, if Sale Area is within a State that maintains a log brand register, brands shall be registered with the State. Purchaser shall use assigned brand exclusively on logs from this sale un- til until Contracting Officer releases brand. Purchaser will fur- nish furnish and apply highway-yellow paint of a lasting quality (oil-base or equivalent). All hammer brands and/or highway-yellow paint must remain on logs until they are domestically processed. Purchaser shall replace identifying marks if they are lost, removed, or become unreadable. Purchaser may re- manufacture remanufacture products into different log lengths. Except for logs remanufactured as part of the mill in-feed process immediately before processingprocess- ing, remanufactured products must be rebranded with the assigned timber sale brand and repainted with highway-yellow paint, unless other- wise otherwise agreed to in writing by Contracting Officer. For such remanufactured products, Contracting Officer may ap- prove approve use of a brand to be used exclusively as a catch brand, in lieu of the assigned timber sale brand.

Product Identification. Before For timber sales west of the 100th meridian, before removal from Sale Area, unless Contracting Officer determines that circumstances warrant a written waiver or adjustment, Purchaser shall: (a) Hammer brand all products that are eight (8) feet or more in length and one-third (1/3) or more sound, on each end that is seven (7) inches or more in diameter. (b) West of the 100th meridian, paint Paint with a spot of highway-yellow paint all domestic processing products that are eight (8) feet or more in length and one-third (1/3) or more sound, on each end that is seven (7) inches or more in diameter. Each paint spot must be not less than three (3) square inches in size. Contracting Officer shall assign brands and, if Sale Area is within a State that maintains a log brand register, brands shall be registered with the State. Purchaser shall use assigned brand exclusively on logs from this sale un- til until Contracting Officer releases brand. Purchaser will fur- nish furnish and apply highway-yellow paint of a lasting quality (oil-base or equivalent). All hammer brands and/or highway-yellow paint must remain on logs until they are domestically processed. Purchaser shall replace identifying marks if they are lost, removed, or become unreadable. Purchaser may re- manufacture remanufacture products into different log lengths. Except for logs remanufactured as part of the mill in-feed process immediately before processing, remanufactured products must be rebranded with the assigned timber sale brand and repainted with highway-highway- yellow paint, unless other- wise otherwise agreed to in writing by Contracting Officer. For such remanufactured products, Contracting Officer may ap- prove approve use of a brand to be used exclusively as a catch brand, in lieu of the assigned timber sale brand.