PRODUCT REPAIRS Sample Clauses

PRODUCT REPAIRS. BSLT shall be responsible to perform any and all repairs or replacements outside of Product warranty and shall be entitled to reimbursement from CRII of all costs and reasonable profit therefor, within 10 days after CRII receives payment from the end user or customer.
AutoNDA by SimpleDocs
PRODUCT REPAIRS. Sonic will Repair a defective Product and forward the --------------- same back to 3Com. Sonic will Repair defective product to 3Com standards. Sonic will upgrade Repaired Product to the most recent 3Com approved ECO level, excluding hardware revisions. Sonic shall charge rates as specified in Exhibit A(1) and that are equal to or less the largest discount offered to Sonic's other customers. Any Repair shall be warranted for the remainder of the warranty period or three (3) months, whichever is longer. This statement excludes Product that has been damaged by accident, abuse or misuse. 3Com reserves the option to perform out-of-warranty Repairs at Repair facilities designated by 3Com. In the event 3Com exercises the option to perform Repairs' at such designated facilities, Sonic shall provide all required product specifications, engineering documentation, and test and Repair procedures.
PRODUCT REPAIRS. Subject to Section 18 of the Agreement, Seller will [***] and forward the same back to 3Com. Seller will [***] in accordance with the Specifications. Subject to the terms and conditions of this Agreement, if Seller provides [***], Seller shall charge rates as specified in [***]. As set forth in Section 18, this statement excludes Product which has been [***]. 3Com reserves the option to perform [***] designated by 3Com. In the event 3Com exercises the option to perform [***] Seller shall provide all required [***] subject to the [***] to be entered into by the parties.
PRODUCT REPAIRS. SUPPLIER will repair a defective Product and forward the same back to BUYER or BUYER’s customer as requested by BUYER. SUPPLIER will Repair defective product to BUYER standards. SUPPLIER will upgrade repaired Product to the most recent BUYER approved ECO level. SUPPLIER shall charge rates as specified in a Statement of Work. Any Repair shall be warranted for the remainder of the warranty period or six (6) months, whichever is longer. This statement excludes Product which has been damaged by accident, abuse or misuse. BUYER reserves the option to perform out-of-warranty Repairs at Repair facilities designated by BUYER. In the event BUYER exercises the option to perform Repairs at such designated facilities, SUPPLIER shall provide all required product specifications, engineering documentation, and test and Repair procedures.
PRODUCT REPAIRS. All repairs of Products, whether in warranty or out of warranty, shall be the responsibility of the manufacturer(s) of the respective item of Product (not of Dynamic Cellular Inc., . d.b.a E-Wireless or Cricket). EXHIBIT E CURRENT CRICKET LOGO GUIDELINES • The Cricket logo must appear in black, be reversed to white, or appear in 2-color or 4-color. When shown as a two color logo, the “k” in the logo should be PMS 369; in 4-color process, use 100% yellow and 80% cyan for the “k” in Cricket. All other letters should be black or reversed to white. • Logo artwork must conform to Cricket artwork standards. Cricket artwork is available from Cricket Marketing in a wide range of electronic formats. Please call Cricket marketing at 000-000-0000 to obtain Cricket artwork. • The relationship, perspective, shape, and configuration of the Cricket logo may not be altered in any way. Logo size must be changed in proportion. • The Cricket logo must remain independent of Subdealer’s name, logo and all referencing text. • The area of white space around the Cricket logo should be a minimum one-quarter of an inch around the entire logo. • The trademark/service xxxx symbol should always be used as part of the Cricket logo. • All advertising must be in compliance with local and federal laws and must be “in good taste.” All claims in such advertising regarding Cricket and its services must be truthful. Exhibit 1

Related to PRODUCT REPAIRS

  • Product Recalls The Company is not aware of any pattern or series of claims against the Company or any of its subsidiaries which reasonably could be expected to result in a generalized product recall relating to products sold by the Company or any of its subsidiaries, regardless of whether such product recall is formal, informal, voluntary or involuntary.

  • Product Recall (a) If a recall is required by applicable Law, or if Buyer or Supplier reasonably determines that a recall is advisable because the goods may create a potential safety hazard, are not in compliance with any applicable code, standard or legal requirement, or contain a defect or non-conformance with the requirements of this Order occurring or likely to occur in multiple goods, which such defects or non-conformances are substantially similar or have substantially similar causes or effects (collectively a “Serial Defect”), the parties shall promptly communicate such facts to each other. At Buyer’s request, Supplier shall promptly develop a corrective action plan satisfactory to Buyer, which shall include all actions required to recall and/or repair the goods and any actions required by applicable Law (“Corrective Action Plan”) for Buyer’s review and approval. At Buyer’s election, Xxxxx may develop the Corrective Action Plan. In no event shall Buyer and Supplier’s failure to agree on the Corrective Action Plan delay the timely notification of a potential safety hazard, non-compliance or Serial Defect to users of the goods, cause either party to be non-compliant with applicable Law or prevent Buyer from taking reasonable actions to prevent injury or damage to persons, equipment or other property. Supplier and Buyer shall cooperate with and assist each other in any corrective actions and/or filings, if applicable.

  • Punch List If, at any time after the Project has been Physically Completed, there shall exist any item or items requiring completion or correction, then the Developer agrees to use all reasonable diligence to complete or correct such item or items so that each conforms to the Final Plans. The parties shall make a Punch-List of the items requiring completion or correction (the "Punch List"). Each item on the Punch-List shall be assigned a reasonable value based upon the reasonable cost of completion or correction of the same or such other value as may be required by the Owner's lender ("Punch-List Amount"). The Developer shall give its written undertaking to complete each such item within forty-five (45) days (or such other period of time as is mutually agreed upon by the parties).

  • Spares Boeing will revise, as applicable, the customized Recommended Spares Parts List (RSPL) and Illustrated Parts Catalog (IPC).

  • Completion of Repairs Borrower will commence any Repairs as soon as practicable after the date of this Loan Agreement and will diligently proceed with and complete such Repairs on or before the Completion Date. All Repairs and Capital Replacements will be completed in a good and workmanlike manner, with suitable materials, and in accordance with good building practices and all applicable laws, ordinances, rules, regulations, building setback lines and restrictions applicable to the Mortgaged Property. Borrower agrees to cause the replacement of any material or work that is defective, unworkmanlike or that does not comply with the requirements of this Loan Agreement, as determined by Lender.

  • Punchlist Upon completion of the Performance Tests and prior to Substantial Completion of a Subproject, Owner and Contractor shall inspect the Subproject, and Contractor shall prepare a proposed Punchlist of items identified as needing to be completed or corrected as a result of such inspection. Contractor shall promptly provide the proposed Punchlist to Owner for its review, together with an estimate of the time and cost necessary to complete or correct each Punchlist item. Contractor shall add to the proposed Punchlist any Punchlist items that are identified by Owner within ten (10) Days after Owner’s receipt of the proposed Punchlist from Contractor, and Contractor shall immediately initiate measures to complete or correct, as appropriate, any item on Contractor’s proposed Punchlist (including those items identified by Owner during Owner’s review) that are not of a Punchlist nature. Notwithstanding anything to the contrary in this Agreement, Contractor and Owner are not required as a condition of Substantial Completion of a Subproject to agree upon and identify every Punchlist item and include it on the Punchlist, but Contractor is required to complete as a condition of Substantial Completion of such Subproject that does not meet the definition of Punchlist as provided in Section 1.1. In the event of a dispute regarding whether a specific item of Work meets the definition of Punchlist under Section 1.1, the Parties shall resolve such dispute in accordance with Section 18.1A. Owner shall provide Contractor with access to the Work after Substantial Completion of a Subproject sufficient to enable Contractor to complete all Punchlist items, so long as such access does not unreasonably interfere with operation of a Subproject after Substantial Completion of the Subproject or the Existing Facility and subject to any reasonable security or safety requirements of Owner. Upon Contractor’s completion or correction of any items necessary to achieve Substantial Completion of a Subproject, as modified by any Owner additions, such Punchlist shall govern Contractor’s performance of the Punchlist items up to Final Completion. All Work on the Punchlist shall be completed by the date required for Final Completion, as specified in Section 5.3C, or Owner may, in addition to any other rights that it may have under this Agreement, complete such Punchlist Work at the expense of Contractor. In the event Owner elects to complete such Punchlist Work, Contractor shall pay Owner, within ten (10) Days after receipt of written notice from Owner, all reasonable costs and expenses incurred by Owner in performing such Punchlist Work, or, at Owner’s sole discretion, Owner may withhold or offset amounts owed to Contractor or collect on the Letter of Credit in accordance with Section 7.8 in the amount of such costs and expenses. Any Defective Work identified after agreement between the Parties of the Punchlist shall be corrected by Contractor as a Warranty item under Article 12.

  • Tenant Repairs To repair, maintain and keep the Leased Premises and all trade fixtures and improvements therein in good and substantial repair subject only to defects in construction of the structural members of the Building, reasonable wear and tear and damage by fire, lightning and tempest or other casualty against which the Landlord is insured (herein collectively referred to as "Tenant Repair Exceptions"); and that the Landlord may enter and view state of repair and that the Tenant will repair according to notice in writing, except for Tenant Repair Exceptions and that the Tenant will leave the Leased Premises in good repair, except for Tenant Repair Exceptions. Notwithstanding anything hereinbefore contained, the Landlord may in any event make repairs to the Leased Premises without notice if such repairs are, in the Landlord's opinion, necessary for the protection of the Building and the Tenant covenants and agrees with the Landlord that if the Landlord exercises any such option to repair, the Tenant will pay to the Landlord together with the next instalment of Monthly Rent which shall become due after the exercise of such option all sums which the Landlord shall have expended in making such repairs and that such sums, if not so paid within such time, shall be recoverable from the Tenant as rent in arrears. Provided further that in the event that the Landlord from time to time makes any repairs as hereinbefore provided, the Tenant shall not be deemed to have been relieved from the obligation to repair and leave the Leased Premises in a good state of repair.

  • Product Testing Upon request, Customer shall provide Operator a laboratory report for each Product delivery by Customer or Customer’s supplier. Operator will not be obligated to receive Contaminated Product for throughput across the Berths, nor will Operator be obligated to accept Product that fails to meet the quality specifications set forth in the arrival notice.

  • Required Repairs Borrower shall make the repairs and improvements to the Property set forth on Schedule I and as more particularly described in the Property Condition Report prepared in connection with the closing of the Loan (such repairs hereinafter referred to as “Required Repairs”). Borrower shall complete the Required Repairs in a good and workmanlike manner on or before the date that is twelve (12) months from the date hereof or within such other time frame for completion specifically set forth on Schedule I attached hereto.

  • Equipment, Etc Each Grantor shall, (i) within ten (10) days after a written request by the Administrative Agent, in the case of Equipment now owned, and (ii) following a request by the Administrative Agent pursuant to subclause (i) above, within ten (10) days after acquiring any other Equipment, deliver to the Administrative Agent, any and all certificates of title, and applications therefor, if any, of such Equipment and shall cause the Administrative Agent to be named as lienholder on any such certificate of title and applications. No Grantor shall permit any such items to become a fixture to real estate or an accession to other personal property unless such real estate or personal property is the subject of a fixture filing (as defined in the UCC) creating a first priority perfected Lien in favor of the Administrative Agent.

Time is Money Join Law Insider Premium to draft better contracts faster.