Common use of Production test requirements Clause in Contracts

Production test requirements. 8.4.1. Non-destructive examination Non-destructive examinations shall be carried out in accordance with a recognized ISO or an equivalent standard. The following tests shall be carried out on each metallic liner: (a) Hardness test in accordance with paragraph A.8 (Appendix A); (b) Ultrasonic examination, in accordance with BS 5045, Part 1, Annex 1B, or demonstrated equivalent NDT method, to ensure that the maximum defect size does not exceed the size specified in the design. 8.4.2. Hydrostatic pressure testing Each finished cylinder shall be hydrostatically pressure tested in accordance with paragraph A.11 (Appendix A). The manufacturer shall define the appropriate limit of permanent volumetric expansion for the test pressure used, but in no case shall the permanent expansion exceed 5per cent of the total volumetric expansion at test pressure. Any cylinders not meeting the defined rejection limit shall be rejected and either destroyed or used for batch rest purposes.

Production test requirements. 8.4.1. Non-destructive examination Non-destructive examinations shall be carried out in accordance with a recognized ISO or an equivalent standard. The following tests shall be carried out on each metallic liner: (a) Hardness test in accordance with paragraph A.8 A.8. (Appendix AA to this annex); (b) Ultrasonic examination, in accordance with BS 5045, Part 1, Annex 1B, or demonstrated equivalent NDT method, to ensure that the maximum defect size does not exceed the size specified in the design. 8.4.2. Hydrostatic pressure testing Each finished cylinder shall be hydrostatically pressure tested in accordance with paragraph A.11 A.11. (Appendix AA to this annex). The manufacturer shall define the appropriate limit of permanent volumetric expansion for the test pressure used, but in no case shall the permanent expansion exceed 5per 5 per cent of the total volumetric expansion at test pressure. Any cylinders not meeting the defined rejection limit shall be rejected and either destroyed or used for batch rest purposes.

Production test requirements. 8.4.1. Non-destructive examination Non-destructive examinations shall be carried out in accordance with a recognized ISO or an equivalent standard. The following tests shall be carried out on each metallic liner: (a) Hardness test in accordance with paragraph A.8 A.8. (Appendix A); (b) Ultrasonic examination, in accordance with BS 5045, Part 1, Annex 1B, or demonstrated equivalent NDT method, to ensure that the maximum defect size does not exceed the size specified in the design. 8.4.2. Hydrostatic pressure testing Each finished cylinder shall be hydrostatically pressure tested in accordance with paragraph A.11 A.11. (Appendix A). The manufacturer shall define the appropriate limit of permanent volumetric expansion for the test pressure used, but in no case shall the permanent expansion exceed 5per 5 per cent of the total volumetric expansion at test pressure. Any cylinders not meeting the defined rejection limit shall be rejected and either destroyed or used for batch rest purposes.

Production test requirements. 8.4.1. Non-destructive examination Non-destructive examinations shall be carried out in accordance with a recognized ISO or an equivalent standard. The following tests shall be carried out on each metallic liner: (a) Hardness test in accordance with paragraph A.8 (Appendix appendix A); (b) Ultrasonic examination, in accordance with BS 5045, Part 1, Annex annex 1B, or demonstrated equivalent NDT method, to ensure that the maximum defect size does not exceed the size specified in the design. 8.4.2. Hydrostatic pressure testing Each finished cylinder shall be hydrostatically pressure tested in accordance with paragraph A.11 (Appendix appendix A). The manufacturer shall define the appropriate limit of permanent volumetric expansion for the test pressure used, but in no case shall the permanent expansion exceed 5per cent of the total volumetric expansion at test pressure. Any cylinders not meeting the defined rejection limit shall be rejected and either destroyed or used for batch rest purposes.