Engine A. Any internal repairs or replacement of internal components, or replacement of engine assembly.
Engines POSITION SERIAL NO. TOTAL HOURS TOTAL CYCLES HRS/CYCLES SINCE LAST SHOP VISIT Time Remaining to Next LIFE LIMITED PART REMOVAL PART NAME HOURS CYCLES MSN MSN
Vessels (A) All of the vessels described in the Registration Statement, the General Disclosure Package and the Prospectus, except for the Contracted Vessels (each of which a Subsidiary has contracted to acquire), are owned directly by Subsidiaries); each of the vessels listed on Schedule F-1 (the “Owned Vessels”) hereto has been duly registered as a vessel under the laws and regulations and flag of the jurisdiction set forth opposite its name on Schedule F-1 in the sole ownership of the Subsidiary set forth opposite its name on Schedule F-1 and no other action is necessary to establish and perfect such entity’s title to and interest in such vessel as against any charterer or third party; each such Subsidiary has good title to the applicable Owned Vessel, free and clear of all mortgages, pledges, liens, security interests and claims and all defects of the title of record except for those liens arising under Credit Facilities, each as disclosed in the Registration Statement, the General Disclosure Package and the Prospectus, and such other encumbrances which would not, in the aggregate, result in a Material Adverse Effect; and each such Owned Vessel is in good standing with respect to the payment of past and current taxes, fees and other amounts payable under the laws of the jurisdiction where it is registered as would affect its registry with the ship registry of such jurisdiction except for failures to be in good standing which would not, in the aggregate, result in a Material Adverse Effect. Upon delivery to and acceptance by the relevant Subsidiary under the MoAs and the Newbuilding Contracts described in the Registration Statement, General Disclosure Package and Prospectus, each of the vessels listed on Schedule F-2 hereto and specified as being under contract (the “Contracted Vessels”) for delivery to and acceptance by a Subsidiary will be duly registered as a vessel under the laws of the jurisdiction set forth opposite its name on Schedule F-2, or under the laws of a generally accepted shipping industry flag jurisdiction, in the sole ownership of the Subsidiary set forth opposite its name on Schedule F-2, on such date, each such Subsidiary will have good title to the applicable Contracted Vessel, free and clear of all mortgages, pledges, liens, security interests, claims and all defects of the title of record, except for any mortgages, pledges, liens, security interests or claims arising from any financing arrangement which the Company or Subsidiary may enter to finance the acquisition of the Contracted Vessel and except such encumbrances which would not, in the aggregate, result in a Material Adverse Effect; and each such Contracted Vessel will be in good standing with respect to the payment of past and current taxes, fees and other amounts payable under the laws of the jurisdiction where it is registered as would affect its registry with the ship registry of such jurisdiction. (B) Each Owned Vessel is, and the Company will use reasonable commercial efforts to ensure that each Contracted Vessel will be, operated in compliance with the rules, codes of practice, conventions, protocols, guidelines or similar requirements or restrictions imposed, published or promulgated by any Governmental Authority, classification society or insurer applicable to the respective vessel (collectively, “Maritime Guidelines”) and all applicable international, national, state and local conventions, laws, regulations, orders, Governmental Licenses and other requirements (including, without limitation, all Environmental Laws), except where such failure to be in compliance would not have, individually or in the aggregate, a Material Adverse Effect. The Company and each applicable Subsidiary are, and with respect to the Contracted Vessels will be, qualified to own or lease, as the case may be, and operate such vessels under all applicable international, national, state and local conventions, laws, regulations, orders, Governmental Licenses and other requirements (including, without limitation, all Environmental Laws) and Maritime Guidelines, including the laws, regulations and orders of each such vessel’s flag state, except where such failure to be so qualified would not have, individually or in the aggregate, a Material Adverse Effect. (C) Each Owned Vessel is, and each Contracted Vessel will be, classed by any of Lloyd’s Register of Shipping, American Bureau of Shipping, Det Norske Veritas or a classification society which is a full member of the International Association of Classification Societies and each Owned Vessel is, and the Company will use reasonable commercial efforts to ensure each Contracted Vessel will be, in class with valid class and trading certificates, without any overdue recommendations.
Spares/bunkers, etc The Sellers shall deliver the Vessel to the Buyers with everything belonging to her on board and on shore including all Owners’ supply items as per the Shipbuilding Contract. All spare parts and spare equipment including spare tail-end shaft(s) and/or spare propeller(s)/propeller blade(s), if any, belonging to the Vessel at the time of delivery used or unused, whether on board or not shall become the Buyers’ property, but spares on order are to be excluded. Forwarding charges, if any, shall be for the Buyers’ account. The Sellers are not required to replace spare parts including spare tail-end shaft(s) and spare propeller(s)/propeller blade(s) which are taken out of spare and used as replacement prior to delivery, but the replaced items shall be the property of the Buyers. The radio installation and navigational equipment shall be included in the sale without extra payment. Unused stores and provisions shall be included in the sale and be taken over by the Buyers without extra payment. The Sellers have the right to take ashore crockery, plates, cutlery, linen and other articles bearing the Sellers’ flag or name, provided they replace same with similar unmarked items. Library, forms, etc., exclusively for use in the Sellers’ vessel(s), shall be excluded without compensation. Captain’s, Officers’ and Crew’s personal belongings including the slop chest are to be excluded from the sale, as well as the following additional items (including items on hire): The Buyers shall take over the remaining bunkers and unused lubricating oils/greases on board at the time of delivery and pay the Sellers’ net price (excluding barging expenses) from the time of supply. Lubricating oils to be those in sealed drums and/or designated storage tanks not having been used or circulated in the vessel’s machinery. Payment under this Clause shall be made at the same time and place and in the same currency as the Purchase Price.
Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.
Spares Boeing will revise, as applicable, the customized Recommended Spares Parts List (RSPL) and Illustrated Parts Catalog (IPC).
Fuel The Vehicle must be returned with the amount of fuel equal to that at the time of the commencement of the rental. If the Vehicle is returned with less fuel, the difference will be charged to You at a rate of $5.00 per litre (which includes a service component).
Accessories, Spare Parts and Tools Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.
Loading RPMG shall schedule the loading and shipping of all outbound corn oil purchased hereunder, but all labor and equipment necessary to load trucks and rail cars and other associated costs shall be supplied and borne by Producer without charge to RPMG. Producer shall handle the corn oil in a good and workmanlike manner in accordance with RPMG’s written requirements and normal industry practice. Producer shall maintain the truck and rail loading facilities in safe operating condition in accordance with normal industry standards and shall visually inspect all trucks and rail cars to assure (i) cleanliness so as to avoid contamination, and (ii) that such trucks and railcars are in a condition suitable for transporting the corn oil. RPMG and RPMG’s agents shall have adequate access to the Ethanol Facility to load Producer’s corn oil on an industry standard basis that allows RPMG to economically market Producer’s corn oil. RPMG’s employees shall follow all reasonable safety rules and procedures promulgated by Producer and provided to RPMG reasonably in advance and in writing. Producer shall supply product description tags, certificates of analysis, bills of lading and/or material safety data sheets that are applicable to all shipments. In the event that Producer fails to provide the labor, equipment and facilities necessary to meet RPMG’s loading schedule, Producer shall be responsible for all costs and expenses, including without limitation actual demurrage and wait time, incurred by RPMG resulting from or arising in connection with Producer’s failure to do so.
Spare Parts 14.1 As specified, the supplier may be required to provide any or all of the following materials, notifications, and information pertaining to spare parts manufactured or distributed by the supplier: (a) such spare parts as the purchaser may elect to purchase from the supplier, provided that this election shall not relieve the supplier of any warranty obligations under the contract and; (b) In the event of termination of production of the spare parts: (i) advance notification to the purchaser of the pending termination, in sufficient time to permit the purchaser to procure needed requirements and; (ii) Following such termination, furnishing at no cost to the purchaser, the blueprints, drawings, and specifications of the spare parts, if requested.
