CONTRACT WORK HOURS AND SAFETY STANDARDS As per the Contract Work Hours and Safety Standards Act (40 U.S.C. 3701-3708), where applicable, all Customer Purchase Orders in excess of ,000 that involve the employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. 3702 and 3704, as supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 U.S.C. 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence.
Safety Standards Performance of the Contract for all commodities or contractual services must comply with requirements of the Occupational Safety and Health Act and other applicable State of Florida and federal requirements.
Quality Standards Each Party agrees that the nature and quality of its products and services supplied in connection with the other Party's Marks will conform to quality standards set by the other Party. Each Party agrees to supply the other Party, upon request, with a reasonable number of samples of any Materials publicly disseminated by such Party which utilize the other Party's Marks. Each Party will comply with all applicable laws, regulations, and customs and obtain any required government approvals pertaining to use of the other Party's marks.
Contract Work Hours and Safety Standards Act The following clauses apply to any Federal-aid construction contract in an amount in excess of $100,000 and subject to the overtime provisions of the Contract Work Hours and Safety Standards Act. These clauses shall be inserted in addition to the clauses required by 29 CFR 5.5(a) or 29 CFR 4.6. As used in this paragraph, the terms laborers and mechanics include watchmen and guards.
Health and Safety Plan Consultant shall prepare and submit a Health and Safety Plan (“HASP”) for the portion of Consultant’s work that will involve field work, assessments, or investigations of certain Project elements. The HASP shall describe how Consultant plans to complete field work, assessments, and/or investigations at the RWF. Consultant’s HASP must comply with the CIP HASP and shall be updated as new conditions are encountered.
Quality Control A. Controlled Affiliate agrees to use the Licensed Marks and Name only in connection with the licensed services and further agrees to be bound by the conditions regarding quality control shown in attached Exhibit A as they may be amended by BCBSA from time-to-time.
B. Controlled Affiliate agrees to comply with all applicable federal, state and local laws.
C. Controlled Affiliate agrees that it will provide on an annual basis (or more often if reasonably required by Plan or by BCBSA) a report or reports to Plan and BCBSA demonstrating Controlled Affiliate’s compliance with the requirements of this Agreement including but not limited to the quality control provisions of this paragraph and the attached Exhibit A.
D. Controlled Affiliate agrees that Plan and/or BCBSA may, from time-to-time, upon reasonable notice, review and inspect the manner and method of Controlled Affiliate’s rendering of service and use of the Licensed Marks and Name.
E. As used herein, a Controlled Affiliate is defined as an entity organized and operated in such a manner, that it meets the following requirements:
(1) A Plan or Plans authorized to use the Licensed Marks in the Service Area of the Controlled Affiliate pursuant to separate License Agreement(s) with BCBSA, other than such Controlled Affiliate’s License Agreement(s), (the “Controlling Plan(s)”), must have the legal authority directly or indirectly through wholly-owned subsidiaries to select members of the Controlled Affiliate’s governing body having not less than 50% voting control thereof and to:
(a) prevent any change in the articles of incorporation, bylaws or other establishing or governing documents of the Controlled Affiliate with which the Controlling Plan(s) do(es) not concur;
(b) exercise control over the policy and operations of the Controlled Affiliate at least equal to that exercised by persons or entities (jointly or individually) other than the Controlling Plan(s); and Notwithstanding anything to the contrary in (a) through (b) hereof, the Controlled Affiliate’s establishing or governing documents must also require written approval by the Controlling Plan(s) before the Controlled Affiliate can:
(i) change its legal and/or trade names;
(ii) change the geographic area in which it operates;
(iii) change any of the type(s) of businesses in which it engages;
(iv) create, or become liable for by way of guarantee, any indebtedness, other than indebtedness arising in the ordinary course of business;
(v) sell any assets, except for sales in the ordinary course of business or sales of equipment no longer useful or being replaced;
(vi) make any loans or advances except in the ordinary course of business;
(vii) enter into any arrangement or agreement with any party directly or indirectly affiliated with any of the owners or persons or entities with the authority to select or appoint members or board members of the Controlled Affiliate, other than the Plan or Plans (excluding owners of stock holdings of under 5% in a publicly traded Controlled Affiliate);
(viii) conduct any business other than under the Licensed Marks and Name;
(ix) take any action that any Controlling Plan or BCBSA reasonably believes will adversely affect the Licensed Marks and Name. In addition, a Plan or Plans directly or indirectly through wholly owned subsidiaries shall own at least 50% of any for-profit Controlled Affiliate.
(2) A Plan or Plans authorized to use the Licensed Marks in the Service Area of the Controlled Affiliate pursuant to separate License Agreement(s) with BCBSA, other than such Controlled Affiliate’s License Agreement(s), (the “Controlling Plan(s)”), have the legal authority directly or indirectly through wholly-owned subsidiaries to select members of the Controlled Affiliate’s governing body having more than 50% voting control thereof and to:
(a) prevent any change in the articles of incorporation, bylaws or other establishing or governing documents of the Controlled Affiliate with which the Controlling Plan(s) do(es) not concur;
(b) exercise control over the policy and operations of the Controlled Affiliate. In addition, a Plan or Plans directly or indirectly through wholly-owned subsidiaries shall own more than 50% of any for-profit Controlled Affiliate.
Work Health and Safety (a) The employer and employee acknowledge their responsibilities under the Work Health and Safety Act 2011 and Work Health and Safety Regulations 2012.
(b) Where there is a Work Health and Safety Representative they must be elected and will carry out the tasks associated with the role of Work Health and Safety Representative set out within the Work Health and Safety Act 2011.
Quality Assurance/Quality Control Contractor shall establish and maintain a quality assurance/quality control program which shall include procedures for continuous control of all construction and comprehensive inspection and testing of all items of Work, including any Work performed by Subcontractors, so as to ensure complete conformance to the Contract with respect to materials, workmanship, construction, finish, functional performance, and identification. The program established by Contractor shall comply with any quality assurance/quality control requirements incorporated in the Contract.
WORKPLACE HEALTH AND SAFETY The parties to this Agreement are committed to providing a safe and healthy workplace and work practices. The parties recognise that illness or injury at the workplace is costly to the employer and the employees and also disruptive to the respective parties. To facilitate healthy and safe work practices, the parties to the Agreement are committed to discussing health and safety issues as they apply to the operations of the employer as part of the consultative measures under this Agreement. The employer and employees under this agreement may refer to their respective industrial representatives for appropriate advice or expertise in enhancing performance with due regard to health and safety initiatives. The parties also recognise the importance of conducting regular audits of the employer's operations, policies and procedures including the employees' skills, knowledge, qualifications and application of healthy and safe work practices.
HEALTH AND SAFETY 25.01 The Employer is subject to the provisions of the Occupational Health and Safety Act of the Province of Ontario and its regulations, including the provision that calls for a worker representative selected by the Union on the University Joint Health and Safety Committees. It is agreed that the University and the Union will cooperate to the fullest possible extent in the prevention of accidents and the promotion of safety and health at University workplaces. To this end, the parties acknowledge and agree that all University Employees on University and third-party premises where Employees work, are required to comply with work- site specific policies, procedures, regulations, and standards relating to health and safety.
25.02 The Employer recognizes the right of workers to be informed about hazards in the workplace, to be provided with appropriate training, and the right to refuse unsafe work in accordance with the Occupational Health and Safety Act where there is an immediate danger to the Employee’s health and safety or to the health and safety of others.
25.03 The Union will select a worker representative for each applicable Joint Health and Safety Committee formed under the Occupational Health and Safety Act. Time spent attending meetings of the Committee or carrying out duties as a worker representative shall be considered time worked.
25.04 A worker representative on a Joint Health and Safety Committee may become a certified worker representative on the Committee. The University will provide the required training for certification at no cost to the Employee or the Union. Time spent in such training shall be considered time worked, as outlined in Article 13 – Hours of Work and Overtime.
25.05 When a worker representative on a Joint Health and Safety Committee ceases to be employed in the Bargaining Unit, he/she will cease to be a worker representative on the Committee.
25.06 The University will supply, and Employees will wear and/or utilize, personal protective equipment and the other devices that the University requires Employees to wear and/or utilize.
25.07 The Employer shall provide information, training and supervision to an Employee to protect the health and safety of that Employee. With reference to Article 13, time spent in such training shall be considered time worked, as outlined in Article 13 – Hours of Work and Overtime.
25.08 The name and contact information of the Health and Safety Officer in each Academic Unit shall be posted in the Department/Academic Unit.
25.09 In accordance with the Occupational Health and Safety Act, persons with authority in the workplace, including any Employees, shall ensure that persons under their authority are informed of health and safety hazards, and advised of policies and procedures associated with the safe handling of materials and equipment.
