Quality Control A. Controlled Affiliate agrees to use the Licensed Marks and Name only in connection with the licensed services and further agrees to be bound by the conditions regarding quality control shown in attached Exhibit A as they may be amended by BCBSA from time-to-time.
B. Controlled Affiliate agrees to comply with all applicable federal, state and local laws.
C. Controlled Affiliate agrees that it will provide on an annual basis (or more often if reasonably required by Plan or by BCBSA) a report or reports to Plan and BCBSA demonstrating Controlled Affiliate’s compliance with the requirements of this Agreement including but not limited to the quality control provisions of this paragraph and the attached Exhibit A.
D. Controlled Affiliate agrees that Plan and/or BCBSA may, from time-to-time, upon reasonable notice, review and inspect the manner and method of Controlled Affiliate’s rendering of service and use of the Licensed Marks and Name.
E. As used herein, a Controlled Affiliate is defined as an entity organized and operated in such a manner, that it meets the following requirements:
(1) A Plan or Plans authorized to use the Licensed Marks in the Service Area of the Controlled Affiliate pursuant to separate License Agreement(s) with BCBSA, other than such Controlled Affiliate’s License Agreement(s), (the “Controlling Plan(s)”), must have the legal authority directly or indirectly through wholly-owned subsidiaries to select members of the Controlled Affiliate’s governing body having not less than 50% voting control thereof and to:
(a) prevent any change in the articles of incorporation, bylaws or other establishing or governing documents of the Controlled Affiliate with which the Controlling Plan(s) do(es) not concur;
(b) exercise control over the policy and operations of the Controlled Affiliate at least equal to that exercised by persons or entities (jointly or individually) other than the Controlling Plan(s); and Notwithstanding anything to the contrary in (a) through (b) hereof, the Controlled Affiliate’s establishing or governing documents must also require written approval by the Controlling Plan(s) before the Controlled Affiliate can:
(i) change its legal and/or trade names;
(ii) change the geographic area in which it operates;
(iii) change any of the type(s) of businesses in which it engages;
(iv) create, or become liable for by way of guarantee, any indebtedness, other than indebtedness arising in the ordinary course of business;
(v) sell any assets, except for sales in the ordinary course of business or sales of equipment no longer useful or being replaced;
(vi) make any loans or advances except in the ordinary course of business;
(vii) enter into any arrangement or agreement with any party directly or indirectly affiliated with any of the owners or persons or entities with the authority to select or appoint members or board members of the Controlled Affiliate, other than the Plan or Plans (excluding owners of stock holdings of under 5% in a publicly traded Controlled Affiliate);
(viii) conduct any business other than under the Licensed Marks and Name;
(ix) take any action that any Controlling Plan or BCBSA reasonably believes will adversely affect the Licensed Marks and Name. In addition, a Plan or Plans directly or indirectly through wholly owned subsidiaries shall own at least 50% of any for-profit Controlled Affiliate.
(2) A Plan or Plans authorized to use the Licensed Marks in the Service Area of the Controlled Affiliate pursuant to separate License Agreement(s) with BCBSA, other than such Controlled Affiliate’s License Agreement(s), (the “Controlling Plan(s)”), have the legal authority directly or indirectly through wholly-owned subsidiaries to select members of the Controlled Affiliate’s governing body having more than 50% voting control thereof and to:
(a) prevent any change in the articles of incorporation, bylaws or other establishing or governing documents of the Controlled Affiliate with which the Controlling Plan(s) do(es) not concur;
(b) exercise control over the policy and operations of the Controlled Affiliate. In addition, a Plan or Plans directly or indirectly through wholly-owned subsidiaries shall own more than 50% of any for-profit Controlled Affiliate.
Bona Fide Request/New Business Request Process for Further Unbundling 6.1 BellSouth shall, upon request of <<customer_name>>, provide to <<customer_name>> access to its network elements at any technically feasible point for the provision of <<customer_name>>'s telecommunications service where such access is necessary and failure to provide access would impair the ability of <<customer_name>> to provide services that it seeks to offer. Any request by <<customer_name>> for access to a network element, interconnection option, or for the provisioning of any service or product that is not already available shall be treated as a Bona Fide Request/New Business Request (BFR/NBR), and shall be submitted to BellSouth pursuant to the BFR/NBR process.
6.2 <<customer_name>> shall submit any BFR/NBR in writing to <<customer_name>>’s Account Manager. The BFR/NBR shall specifically identify the requested service date, technical requirements, space requirements and/or such specifications that clearly define the request such that BellSouth has sufficient information to analyze and prepare a response. The BFR/NBR also shall include <<customer_name>>’s designation of the request as being (i) pursuant to the Telecommunications Act of 1996 or (ii) pursuant to the needs of the business.
Packaging Materials and Containers for Retail Sale 1. When packaging materials and containers in which a good is packaged for retail sales are classified in the Harmonized System with the good, they shall not be taken into account in determining whether all non-originating materials used in the production of the good undergo the applicable change in tariff classification set out in Annex 4.03.
2. When the good is subject to a requirement of regional value content, the value of these packaging materials and containers shall be taken into account as originating or non-originating materials, as the case may be, in calculating the regional value content of the good.
Incident Event and Communications Management a. Incident Management/Notification of Breach - DST shall develop, implement and maintain an incident response plan that specifies actions to be taken when DST or one of its subcontractors suspects or detects that a party has gained material unauthorized access to Fund Data or systems or applications containing any Fund Data (the “Response Plan”). Such Response Plan shall include the following:
i. Escalation Procedures - An escalation procedure that includes notification to senior managers and appropriate reporting to regulatory and law enforcement agencies. This procedure shall provide for reporting of incidents that compromise the confidentiality of Fund Data (including backed up data) to Fund via telephone or email (and provide a confirmatory notice in writing as soon as practicable); provided that the foregoing notice obligation is excused for such period of time as DST is prohibited by law, rule, regulation or other governmental authority from notifying Fund.
ii. Incident Reporting - DST will use commercially reasonable efforts to promptly furnish to Fund information that DST has regarding the general circumstances and extent of such unauthorized access to the Fund Data.
Contact in Event of Unauthorized Transfer If you believe your Card and/or access code has been lost or stolen or that someone has transferred or may transfer money from your account without your permission, either call us immediately at:
Retention of Written Communications The Registrar shall retain copies of all letters, notices and other written communications received pursuant to Section 2.1 or this Section 2.6. The Issuer shall have the right to inspect and make copies of all such letters, notices or other written communications at any reasonable time upon the giving of reasonable prior written notice to the Registrar.
CERTIFICATION OF NO ASBESTOS CONTAINING MATERIALS OR WORK 8.1 The Contractor shall be responsible for ensuring that no asbestos containing materials or work is included within the scope of the Work. The Contractor shall take whatever measures it deems necessary to insure that all employees, suppliers, fabricators, material men, subcontractors, or their assigns, comply with this requirement.
8.2 The Contractor shall ensure that Texas Department of Health licensed individuals, consultants or companies are used for any required asbestos work including asbestos inspection, asbestos abatement plans/specifications, asbestos abatement, asbestos project management and third-party asbestos monitoring.
Quality Assurance/Quality Control Contractor shall establish and maintain a quality assurance/quality control program which shall include procedures for continuous control of all construction and comprehensive inspection and testing of all items of Work, including any Work performed by Subcontractors, so as to ensure complete conformance to the Contract with respect to materials, workmanship, construction, finish, functional performance, and identification. The program established by Contractor shall comply with any quality assurance/quality control requirements incorporated in the Contract.
Regulation M Notice Unless the exceptive provisions set forth in Rule 101(c)(1) of Regulation M under the Exchange Act are satisfied with respect to the Shares, the Company shall give the Manager at least one Business Day’s prior notice of its intent to sell any Shares in order to allow the Manager time to comply with Regulation M.
PROCEDURE FOR DEALING WITH SAFETY ISSUES OR INCIDENTS 11.1 The Employer, the Employees and the Union agree that for the purposes of s. 81 of the WHS Act matters about work health and safety arising at the workplace shall be resolved in accordance with this procedure.
11.2 The Parties agree that for the purposes of this procedure and s. 81(3) of the WHS Act the following persons shall be the representatives of the following parties:
(a) the Principal Contractor (as defined in the WHS Act) - Site Manager or any other person nominated by the Principal Contractor
(b) the Employers - the Site Manager or any other person nominated by the Employer(s)
(c) The Employees - the Union or other representatives. (Collectively referred to as "Nominated Parties”)
11.3 The Nominated Parties agree that representatives shall be entitled to:
(a) inspect any work system, plant, substance, structure, or other thing relevant to resolving the issue
(b) consult with relevant Employees in relation to resolving the issue
(c) consult with the relevant PCBU (as defined in the WHS Act) about resolving the issue
(d) inspect and take copies of any document that is directly relevant to resolving the issue; and
(e) advise any person whom the representative reasonably believes to be exposed to a serious risk to his or her health and safety, emanating from an immediate and imminent exposure to a hazard of that risk.
11.4 The Nominated Parties and/or their representatives may commence the procedure by informing, either by themselves or their representative, the other Parties and/or representatives that:
(a) there is an issue to be resolved; and
(b) the nature and scope of the issue.
11.5 As soon as the Parties and/or their representatives are informed of the issue, the Nominated Parties and/or their representatives must meet or communicate with each other to attempt to resolve the issue.
11.6 The Nominated Parties and/or their representatives must have regard to all relevant matters including:
(a) the degree and imminent risk to the Employees or other persons affected by the issue.
(b) the number and location of Employees and other persons affected by the issue.
(c) the measures both temporary and permanent that must be implemented to resolve the issue.
(d) who will be responsible for implementing the resolution measures.
(e) whether the hazard or risk can be isolated; and
(f) the time that may elapse before the hazard or risk is permanently corrected.
11.7 Once the issue is resolved details of the issue and its resolution must be set out in writing with all Nominated Parties and/or their representatives to be satisfied that the agreement reflects the resolution of the issue with a copy given to all Nominated Parties and/or their representatives to the issue. The issue, once resolved, shall be recorded in the next safety committee meeting minutes with the agreed resolution.
11.8 The Nominated Parties and/or their representatives must make reasonable efforts to achieve a timely and final resolution of the issue. If within a reasonable time there is still no resolution, any of the Nominated Parties attempting to resolve the issue may then ask Work Health and Safety Queensland, and/or the QBCC, where applicable, to arrange for an inspector to attend the workplace to assist in resolving the issue.
11.9 Direction to cease work
(a) If -
(i) an issue concerning health or safety arises at a workplace or from the conduct of the undertaking of the Employer; and
(ii) the issue concerns work which involves an immediate threat to the health or safety of any person; and
(iii) given the nature of the threat and degree of risk, it is not appropriate to adopt the processes set out in clause 11.7 above
(b) the Employer and/or the health and safety representative for the designated work group in relation to which the issue has arisen may, after consultation between them, direct that the work is to cease.
(c) During any period for which work has ceased in accordance with such a direction, the Employer may assign any Employees whose work is affected to suitable and safe alternative work.
11.10 Fundamental to this process is a standing invitation for Union representatives to attend site to assist with all matters relating to health and safety.
11.11 Employees are not required to work in circumstances where the employee or a Union representative reasonably believes a safety law is being, or will be, contravened. Consultation between the relevant parties will occur throughout this procedure including with senior representatives of the Employer and the Union.
