Quantity Estimate Sample Clauses

Quantity Estimate. The estimated quantities of timber by species designated for cutting under BT2.3 and expected to be cut under Utilization Standards are listed in AT2. Estimated quantity in AT2 does not include the following: (a) Damaged timber under BT2.13; (b) Unintentionally cut timber under BT2.14; (c) Construction timber under BT2.15 cut outside of Payment Units and removed from construction use for utilization by Purchaser; (d) Timber within clearing limits of Temporary Roads or other authorized clearings and that is not designated under BT2.31, BT2.33, BT2.34, or BT2.35; or (e) Dead or unstable live trees that are sufficiently tall to reach Purchaser’s landings or the roadbed of Specified Roads under BT2.32. Estimated quantities for such timber not included in AT2 shall be determined as stated in CT6.8. If Sale Area Map shows Payment Units where Marking or Measuring is to be completed after date of timber sale advertisement, the objective of Forest Service shall be to designate for cutting in such Payment Units sufficient timber so that Sale Area shall yield the approximate estimated quantities by species or species groups stated in AT2. However, the estimated quantities stated in AT2 are not to be construed as guarantees or limitations of the timber quantities to be designated for cutting under the terms of this contract. Quantity adjustments shall not be made under this Section after there is modification for Catastrophic Damage under BT8.32.
Sample 1Sample 2Sample 3See All (61)
AutoNDA by SimpleDocs
Quantity Estimate. The estimated quantities of timber by species designated for cutting under CT.3 and expected to be cut under Utilization Standards are listed in AT.2. Estimated quantity in AT.2 does not include the fol- lowing: (a) Damaged timber under CT.1.3; (b) Unintentionally cut timber under CT.1.4; (c) Construction timber under CT.1.5 cut outside of Payment Units and removed from construction use for utiliza- tion by Contractor; (d) Timber within clearing limits of Temporary Roads or other authorized clearings and that is not designated un- der CT.3.1, CT.3.3, CT.3.4, or CT.3.5; or (e) Dead or unstable live trees that are sufficiently tall to reach Contractor’s landings, work areas, or the roadbed of Specified Roads under CT.
Sample 1Sample 2Sample 3See All (8)
Quantity Estimate. The estimated quantities of timber by species designated for cutting under BT2.3 and expected to be cut under Utilization Standards are listed in (a) Damaged timber under BT2.13; (b) Unintentionally cut timber under BT2.14; (c) Construction timber under BT2.15 cut outside of Payment Units and removed from construction use for uti- lization by Contractor; (d) Timber within clearing limits of Temporary Roads or other authorized clearings and that is not designated un- der BT2.31, BT2.33, BT2.34, or BT2.35; or (e) Dead or unstable live trees that are sufficiently tall to reach Contractor’s landings, work areas, or the roadbed of Specified Roads under BT2.32. Estimated quantities for such timber not included in AT2 shall be determined as stated in CT6.8. If Contract Area Map shows Payment Units where Marking or Measuring is to be completed after date of con- tract advertisement, the objective of Forest Service shall be to designate for cutting in such Payment Units sufficient timber so that Contract Area shall yield the approximate estimated quantities by species or species groups stated in AT2. However, the estimated quantities stated in AT2 are not to be construed as guarantees or limitations of the timber quantities to be designated for cutting under the terms of this contract. Quantity adjustments shall not be made under this Section after there is modification for Catastrophic Dam- age under BT8.32.
Sample 1Sample 2Sample 3See All (6)
Quantity Estimate. The estimated quantities of timber by species designated for cutting under BT2.3 and ex- pected to be cut under Utilization Standards are listed on Page 1. Estimated quantity on Page 1 does not include the fol- lowing: (a) Damaged timber under BT2.13; (b) Unintentionally cut timber under BT2.14; (c) Timber within clearing limits of roads or other authorized clearings and that is not designated under BT2.31, BT2.33, BT2.34, or BT2.35; or (d) Dead or unstable live trees that are sufficiently tall to reach Purchaser’s landings or roads under BT2.32. Estimated quantities for such timber not included on Page 1 shall be determined as stated in CT6.8.
Sample 1Sample 2
Quantity Estimate. The estimated quantities of forest products by species Designated for harvesting under BP2.3 and expected to be harvested are listed on Page 1. Estimated quantity on Page 1 does not include the following: (a) Damaged forest products under BP2.13, or (b) Unintentionally harvested forest products under BP2.14. Estimated quantities for such forest products not included on Page 1 shall be determined as stated in CP6.8.
Sample 1
Quantity Estimate. Buyer shall notify Seller in writing on or before January 1 and June 30, 2001, and on or before January 1 and June 30 of each succeeding year of Buyer's good faith estimate of its requirements for the next succeeding six month period. In the event that Buyer's actual requirements exceed its estimated requirements for any given period by more than *** , then ----------------------------- *** Terms represented by this symbol are considered confidential. These confidential terms have been omitted pursuant to a Confidential Treatment Request filed with the Securities and Exchange Commission ("SEC") and have been filed separately with the SEC. Seller shall have the option, but not the obligation, to sell Buyer any or all of such requirements in excess of *** of such estimate. In the event that Seller is unable to sell Buyer *** of its projected requirements for any period, then ***. Seller shall sell, and Buyer shall purchase, all quantities sold hereunder on the terms and conditions (including without limitation credit terms) provided herein.
Sample 1
Quantity Estimate. The estimated quantities of timber by species designated for cutting under CT.3 and expected to be cut under Utilization Standards are listed in AT.2. Estimated quantity in AT.2 does not include the following:
Sample 1
AutoNDA by SimpleDocs

Related to Quantity Estimate

  • Pre-Estimate The parties agree that if Market Quotation applies an amount recoverable under this Section 6(e) is a reasonable pre-estimate of loss and not a penalty. Such amount is payable for the loss of bargain and the loss of protection against future risks and except as otherwise provided in this Agreement neither party will be entitled to recover any additional damages as a consequence of such losses.

  • Cost Estimate The cost estimate shall set out the estimated costs for the proposed Change Order in such a way that a fair evaluation can be made. It shall include a breakdown for labor, materials, equipment and markups for overhead and profit, unless TxDOT agrees otherwise. If the work is to be performed by Subcontractors and if the work is sufficiently defined to obtain Subcontractor quotes, DB Contractor shall obtain quotes (with breakdowns showing cost of labor, materials, equipment and markups for overhead and profit) on the Subcontractor’s stationery and shall include such quotes as back-up for DB Contractor’s estimate. No markup shall be allowed in excess of the amounts allowed under Section 10.6. DB Contractor shall identify all conditions with respect to prices or other aspects of the cost estimate, such as pricing contingent on firm orders being made by a certain date or the occurrence or non-occurrence of an event.

  • Cost Estimates If this Agreement pertains to the design of a public works project, CONSULTANT shall submit estimates of probable construction costs at each phase of design submittal. If the total estimated construction cost at any submittal exceeds ten percent (10%) of CITY’s stated construction budget, CONSULTANT shall make recommendations to CITY for aligning the PROJECT design with the budget, incorporate CITY approved recommendations, and revise the design to meet the Project budget, at no additional cost to CITY.

  • ESTIMATED / SPECIFIC QUANTITY CONTRACTS Estimated quantity contracts, also referred to as indefinite delivery / indefinite quantity contracts, are expressly agreed and understood to be made for only the quantities, if any, actually ordered during the Contract term. No guarantee of any quantity is implied or given. With respect to any specific quantity stated in the contract, the Commissioner reserves the right after award to order up to 20% more or less (rounded to the next highest whole number) than the specific quantities called for in the Contract. Notwithstanding the foregoing, the Commissioner may purchase greater or lesser percentages of Contract quantities should the Commissioner and Contractor so agree. Such agreement may include an equitable price adjustment.

  • ESTIMATED QUANTITIES 1.1 The quantities set forth in the line items and specification document are approximate and represent the estimated requirements for the contract period. 1.2 Items listed may or may not be an inclusive requirements for this category. 1.3 Category items not listed, but distributed by bidder are to be referred to as kindred items. Kindred items shall receive the same percentage of discount or pricing structure as items listed in the specification document. 1.4 The unit prices and the extended total prices shall be used as a basis for the evaluation of bids. The actual quantity of materials necessary may be more or less than the estimates listed in the specification document, but the City/County shall be neither obligated nor limited to any specified amount. If possible, the Owners will restrict increases/decreases to 20% of the estimated quantities listed in the specification document.

  • Statement of Estimated Direct Expenses In addition, Landlord shall give Tenant a yearly expense estimate statement (the “Estimate Statement”) which shall set forth Landlord’s reasonable estimate (the “Estimate”) of what the total amount of Direct Expenses for the then-current Expense Year shall be and the estimated Tenant’s Share of Direct Expenses (the “Estimated Direct Expenses”). The failure of Landlord to timely furnish the Estimate Statement for any Expense Year shall not preclude Landlord from enforcing its rights to collect any Estimated Direct Expenses under this Article 4, nor shall Landlord be prohibited from revising any Estimate Statement or Estimated Direct Expenses theretofore delivered to the extent necessary. Thereafter, Tenant shall pay, with its next installment of Base Rent due that is at least thirty (30) days thereafter, a fraction of the Estimated Direct Expenses for the then-current Expense Year (reduced by any amounts paid pursuant to the last sentence of this Section 4.4.2). Such fraction shall have as its numerator the number of months which have elapsed in such current Expense Year, including the month of such payment, and twelve (12) as its denominator. Until a new Estimate Statement is furnished (which Landlord shall have the right to deliver to Tenant at any time), Tenant shall pay monthly, with the monthly Base Rent installments, an amount equal to one-twelfth (1/12) of the total Estimated Direct Expenses set forth in the previous Estimate Statement delivered by Landlord to Tenant.

  • Estimate The Engineer shall independently develop and report quantities necessary to construct the contract in standard State bid format at the specified milestones and Final PS&E submittals. The Engineer shall prepare each construction cost estimates using Estimator or any approved method. The estimate shall be provided at each milestone submittal or in DCIS format at the 95% and Final PS&E submittals per State’s District requirement.

  • Estimated Cost Estimated costs by construction phases for Specified Roads listed in A7 are stated by segments in the Schedule of Items. Such estimated costs are subject to adjustment under B3.3, B5.2, B5.21, B5.212, B5.25, and B5.26. Appropriately adjusted costs shall be made a part of a revised Schedule of Items and shown as adjustments to Timber Sale Account. The revised Schedule of Items shall supersede any prior Schedule of Items when it is dated and signed by Contracting Officer and a copy is furnished to Purchaser.

  • Estimates and Reconciliation of Estimates Where estimated expenditures are used to determine the amount of the drawdown, the State will indicate in the terms of the State unique funding technique how the estimated amount is determined and when and how the State will reconcile the difference between the estimate and the State's actual expenditures.

  • Estimated Closing Statement (i) No later than three (3) Business Days prior to the Closing Date, the Company shall deliver to Acquiror (A) a statement (the “Estimated Closing Statement”) setting forth the Company’s good faith estimates of (1) the Estimated Net Working Capital (as well as the resulting Estimated Net Working Capital Surplus (if any) or Estimated Net Working Capital Shortfall (if any)), (2) the Estimated Transaction Expenses, (3) the Estimated Closing Cash and (4) the Estimated Closing Debt, and (B) a schedule which shall include (1) the Estimated Total Stock Purchase Consideration, (2) wire instructions for the payments to be made to NewCo at the Closing pursuant to Section 2.3(b), (3) each Seller’s Pro Rata Percentage and the portion of the Estimated Total Stock Purchase Consideration attributable to each Seller; and (4) wire instructions for the payments of Debt, and the Estimated Transaction Expenses, including, for the avoidance of doubt, the Transaction Bonuses, to be made to the applicable payees thereof pursuant to Section 2.3(b) (such schedule delivered pursuant to this clause (B), the “Payment Schedule”). The Estimated Closing Statement shall be prepared by the Company in accordance with the Agreed Principles. (ii) The Company shall consider in good faith any reasonable comments or objections to any amounts set forth on the Estimated Closing Statement notified to it by Acquiror prior to the Closing and if, prior to the Closing, the Company and Acquiror agree to make any modification to the Estimated Closing Statement, then the Estimated Closing Statement as so modified shall be deemed to be the Estimated Closing Statement; provided, that the failure of the Company and Acquiror to reach such mutual agreement will not give any party the right to terminate this Agreement or otherwise delay or fail to close the Stock Purchase or the other transactions contemplated hereunder. (iii) Acquiror shall be entitled to rely on the accuracy of the Estimated Closing Statement and the Payment Schedule in all respects in making any payments pursuant to this Agreement, and all obligations to make such payments shall be deemed fulfilled to the extent such payments are made in accordance with this Agreement, the Payment Schedule, and the Estimated Closing Statement, including the Earn-Out Payment. None of Acquiror or any of its Affiliates (including, after the Closing, the Company) or the Seller Representative shall have any liability or obligation to any Person, including the Sellers and the Seller Guarantors, for any Damages arising from or relating to any errors, omissions or inaccuracies in the calculations of the portion of any amounts payable to any Seller or any other Person or any other errors, omissions or inaccuracy in the information set forth on the Estimated Closing Statement or the Payment Schedule.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!