Removal of Contractor Employee All employees of the Engineer assigned to this contract shall have such knowledge and experience as will enable them to perform the duties assigned to them. The State may instruct the Engineer to remove any employee from association with work authorized in this contract if, in the sole opinion of the State, the work of that employee does not comply with the terms of this contract or if the conduct of that employee becomes detrimental to the work.
Quality of Service Contractor shall perform its services with care, skill, and diligence, in accordance with the applicable professional standards currently recognized by such profession, and shall be responsible for the professional quality, technical accuracy, completeness, and coordination of all reports, designs, drawings, plans, information, specifications, and/or other items and services furnished under this Agreement. Contractor shall, without additional compensation, correct or revise any errors or deficiencies immediately upon discovery in its reports, drawings, specifications, designs, and/or other related items or services.
Description of Service 2.9.1.1 BellSouth shall make available to <<customer_short_name>> LMU information with respect to Loops that are required to be unbundled under this Agreement so that <<customer_short_name>> can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment <<customer_short_name>> intends to install and the services <<customer_short_name>> wishes to provide. LMU is a preordering transaction, distinct from <<customer_short_name>> ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement.
2.9.1.2 BellSouth will provide <<customer_short_name>> LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters.
2.9.1.3 BellSouth’s LMU information is provided to <<customer_short_name>> as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided.
2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC.
2.9.1.5 <<customer_short_name>> may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by <<customer_short_name>> and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee <<customer_short_name>>’s ability to provide advanced data services over the ordered Loop type. Furthermore, the LMU information for Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Except as set forth in Section 2.9.1.6, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by <<customer_short_name>> or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. <<customer_short_name>> is fully responsible for any of its service configurations that may differ from BellSouth’s technical standard for the Loop type ordered.
2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify <<customer_short_name>>, according to the applicable network disclosure requirements. It will be <<customer_short_name>>’s responsibility to move any service it may provide over such facilities to alternative facilities. If <<customer_short_name>> fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.
Withdrawal of Services 50.1 Notwithstanding anything contained in this Agreement, except as otherwise required by Applicable Law, Verizon may terminate its offering and/or provision of any Service under this Agreement upon thirty (30) days prior written notice to CBB.
50.2 Notwithstanding anything contained in this Agreement, except as otherwise required by Applicable Law, Verizon may with thirty (30) days prior written notice to CBB terminate any provision of this Agreement that provides for the payment by Verizon to CBB of compensation related to traffic, including, but not limited to, Reciprocal Compensation and other types of compensation for termination of traffic delivered by Verizon to CBB. Following such termination, except as otherwise agreed in writing by the Parties, Verizon shall be obligated to provide compensation to CBB related to traffic only to the extent required by Applicable Law. If Verizon exercises its right of termination under this Section, the Parties shall negotiate in good faith appropriate substitute provisions for compensation related to traffic; provided, however, that except as otherwise voluntarily agreed by Verizon in writing in its sole discretion, Verizon shall be obligated to provide compensation to CBB related to traffic only to the extent required by Applicable Law. If within thirty (30) days after Verizon’s notice of termination the Parties are unable to agree in writing upon mutually acceptable substitute provisions for compensation related to traffic, either Party may submit their disagreement to dispute resolution in accordance with Section 14 of this Agreement.
Scope of Service Interconnection Service shall be provided to the Interconnection Customer at the Point of Interconnection (a), in the case of interconnection of the Customer Facility of a Generation Interconnection Customer, up to the Maximum Facility Output, and (b), in the case of interconnection of the Customer Facility of a Transmission Interconnection Customer, up to the Nominal Rated Capability. The location of the Point of Interconnection shall be mutually agreed by the Interconnected Entities, provided, however, that if the Interconnected Entities are unable to agree on the Point of Interconnection, the Transmission Provider shall determine the Point of Interconnection, provided that Transmission Provider shall not select a Point of Interconnection that would impose excessive costs on either of the Interconnected Entities and shall take material system reliability considerations into account in such selection. Specifications for the Customer Facility and the location of the Point of Interconnection shall be set forth in an appendix to the Interconnection Service Agreement and shall conform to those stated in the Facilities Study.
Level of Service Complex case management with a provider focus is appropriate for members who either choose not to be actively involved or are unable to actively participate in their health care. Complex case management targets members with two (2) or more disease states who need assistance with care coordination, making preventive care appointments, or accessing care to address the members’ chronic health conditions or members who have had an inpatient hospital stay in the last ninety (90) days or members with high dollar claims of over fifty thousand dollars (>$50,000) in six (6) months. The focus is on working with the providers to meet the needs of the individual through communication with the PMP (if applicable), other providers, and the member’s natural support system. The goal is to help members gain optimum health or improved functional capability, in the right setting and in a cost-effective manner. Complex case management with provider focus is the active coordination by the Contractor of care and services between providers while navigating the extensive systems and resources required for the member. It involves comprehensive assessment, determination of available benefits, development and implementation of a complex case management plan directed at the chronic health conditions. At a minimum, the Contractor must provide complex case management services for members discharged from an inpatient psychiatric, drug overdose, or substance abuse hospitalization, for no fewer than ninety (90) calendar days following that inpatient hospitalization discharge. The Contractor must also provide complex case management services for any member at risk for inpatient psychiatric or substance abuse re -hospitalization. Care managers must contact members during an inpatient hospitalization or as soon as practicable upon receiving notification of a member’s inpatient behavioral health hospitalization. The care manager must work with the hospital discharge planner, provider case manager and/or natural supports (i.e. family) to ensure that an outpatient follow-up appointment is scheduled to occur no later than seven (7) calendar days following the inpatient behavioral health hospitalization discharge and transportation is not a barrier to attending the appointment. Complex case management with provider focus includes all of the services and benefits from disease management and care management. In addition,
Use of Service Areas The service areas, as located within the Project, shall be ear- marked for purposes such as parking spaces and services including but not limited to electric sub-station, transformer, DG set rooms, underground water tanks, Pump rooms, maintenance and service rooms, firefighting pumps and equipment etc. and other permitted uses as per sanctioned plans. The Allottee shall not be permitted to use the services areas in any manner whatsoever, other than those earmarked as parking spaces and the same shall be reserved for use by the Association for rendering maintenance services.
Continuity of Service It shall be the right of all Subscribers to continue receiving Cable Service insofar as their financial and other obligations to the Grantee are honored, and subject to Xxxxxxx’s rights under Section 15.2 of this Franchise.
Removal of Discipline Any reprimand notices or disciplinary measures will remain on the employee or owner operator's file for one year from the date of notice or reprimand unless there is a re- occurrence of the same or similar infraction. At the completion of the one year period, the reprimand or disciplinary notice will be removed from the file. Said files to be removed shall not be considered to be removed but shall be physically removed and destroyed. If a repeat infraction occurs within the one year period, the original and subsequent notices or reprimands will remain on the file for a further year from the date of the most recent notice or reprimand. Reprimand notices and disciplinary measures resulting from violations of a criminal or civil nature, including driving record, will remain part of the employee or owner operator's file indefinitely. Whenever an employee or owner operator signs a document pertaining to discipline, he/she does so only to acknowledge that he/she has been notified accordingly.
Completion of Services (a) The Customer must:
(i) notify Deswik in writing as soon as the Customer becomes aware of any defects in the Services; or
(ii) provide Deswik with an email confirming successful completion of any Services Deswik advises the Customer have been completed.
(b) If the Customer does not notify Deswik of any defects under clause 5.4(a)(i) or provide Deswik with an email confirming successful completion of the Services within 14 days of Deswik notifying the Customer that the relevant Services are complete, the Customer is deemed to have accepted the Services.
(c) If the Customer notifies Deswik of any defects under clause 5.4(a)(i), Deswik will, as soon as possible investigate and (where applicable) undertake rectification of the defects. Upon completion of any defect rectification the Customer must promptly provide an email notification of the successful completion of the services, unless further defects exist. In this case, the Customer is further required to notify Deswik of such defects.
