Responsibilities for Proper Loading Sample Clauses

Responsibilities for Proper Loading. A driver cannot operate a commercial vehicle unless (1) the cargo is properly distributed and adequately secured, (2) the means of fastening the cargo is secured, and (3) the cargo does not obscure the driver’s view or interfere with the movement of his arms or legs. A driver must assure himself that the load is adequately secured before he drives the vehicle and must examine the cargo and its load-securing devices within the first 50 miles after beginning a trip and adjust the load-securing devices as needed. The driver must also reexamine the cargo and its securing devices when he makes a change of his duty status, after the vehicle has been driven for three hours, or after the vehicle has been driven 150 miles whichever comes first. The load inspection procedures do not apply to a sealed trailer when the driver has been ordered not to open it or to a trailer that has been loaded in a manner that makes inspection of the cargo impracticable. If a member of the public is injured because of improperly loaded cargo, both the shipper who loaded the cargo and the Client may be held liable for the injury. A shipper that assumes responsibility for loading the vehicle can be held liable for improperly securing a load under a common law theory of negligence, and federal regulations will provide evidence of the proper standard of care to be utilized by the shipper in loading the vehicle. When the driver himself is injured in an accident, the shipper cannot be held liable for the improper loading of the vehicle unless the loading defects are latent and concealed and cannot be discerned by ordinary observation by the agents of the Client. In determining if the defect in loading is patent and should have been discovered by the driver, a court will take into consideration the experience of the driver and whether the driver is given assurances by the shipper’s employees that there is no defect in the loading of the cargo. A motor Client cannot be held liable for improperly loading a sealed trailer since the driver does not have the opportunity to inspect the load. When a person is injured during the loading or unloading process at the shipper or consignee’s facility, the trucking company’s liability will be determined according to the rules applicable to the facility owner, and the company will be subject to the same liability or freedom from liability as the owner.
AutoNDA by SimpleDocs
Responsibilities for Proper Loading. A driver cannot operate a commercial vehicle unless (1) The cargo is properly distributed and adequately secured,
Responsibilities for Proper Loading cannot operate a commercial vehicle unless (1) The cargo is properly distributed and adequately secured,
Responsibilities for Proper Loading. A driver cannot operate a commercial vehicle unless (1) the cargo is properly distributed and adequately secured, (2) the means of fastening the cargo is secured, and (3) the cargo does notobscure the driver’s view or interfere with the movement of his arms or legs. A driver must assure himself that the load is adequately secured before he drives the vehicle and must examine the cargo and its load-securing devices within the first 50 miles after beginning a trip and adjust the load-securing devices as needed. The driver must also reexamine the cargo and its securing devices when he makes a change of his duty status, after the vehicle has been driven for three hours, or after the vehicle has been driven 150 miles whichever comes first.

Related to Responsibilities for Proper Loading

  • COUNTY’S RESPONSIBILITIES A. A County program liaison will monitor the submission of all correspondence required in this Agreement, including, but not limited to: 1. Quarterly Treatment Reports; 2. Financial reports such as annual budgets, cost allocation plans, and cost reports; 3. Incident reports; 4. Outcome data; 5. Monthly XXXXX Reports 6. Other requested reports B. A County program liaison may visit Contractor during the contract term. The visits shall be for the purpose of reviewing any aspect of Contractor’s program operations. The visit may include, but is not limited to: 1. Review all pertinent participant records. 2. Conduct appropriate interviews/discussions with participants served by Contractor. 3. Review and monitor all correspondence and reports submitted by Contractor related to Contractor’s services provided under this Agreement. 4. Meet with appropriate program management and operations staff. 5. Conduct site visit(s) to Contractor’s program(s) at least once during the term of the Agreement to review all aspects of program operations. Site visit(s) may include a review of Contractor’s programmatic and fiscal documentation related to required reports on services specified in the Exhibits. a. Provide a written site review report documenting areas of compliance and any necessary corrective action(s) required. 6. A County program liaison may attend an organized activity of a selected component or selected components of Contractor’s program(s) at least once during the contract term. C. AODS will conduct periodic mandatory treatment provider meetings with representatives of all contracted service providers and appropriate staff. D. Provide ongoing technical assistance as needed. E. AODS shall act as intermediary on behalf of each contracted alcohol and drug service provider in the submission of the California Outcomes Measurement System (CalOMS) data submissions to the State of California. I. GENERAL ADMINISTRATIVE REQUIREMENTS A. Attend each of the following meetings: 1. Contractor shall attend periodic mandatory meetings; and 2. Drug and Alcohol Information System for You (DAISY) User Group meeting. 3. Other meetings as required by the County B. Contractor shall acknowledge the San Mateo County Alcohol and Other Drug Services (AODS) and/or the County of San Mateo as a funding source on newly developed promotional materials. C. Subcontracting requirements: 1. Pursuant to paragraph 12 of the body of this Agreement, Contractor may subcontract for provision of services described in this Agreement with written approval of the Director of the Human Services Agency or her designee. If Contractor subcontracts for any services under this Agreement, Contractor will guarantee that any and all subcontractors have and maintain the same level of insurance coverage required of the Contractor under this Agreement. Contractor and County will be listed as additional insured on all applicable insurance of subcontractor.

  • Responsibilities of the Contractor The Contractor shall provide all technical and professional expertise, knowledge, management, and other resources required for accomplishing all aspects of the tasks and associated activities identified in the Scope of Work. In the event that the need arises for the Contractor to perform services beyond those stated in the Scope of Work, the Contractor and the City shall negotiate mutually agreeable terms and compensation for completing the additional services.

  • Client’s Responsibilities (a) Client agrees to advise Consultant regarding Client's Project requirements and to provide all relevant information, surveys, data and previous reports accessible to Client which Consultant may reasonably require. (b) Client shall designate a Project Representative to whom all communications from Consultant shall be directed and who shall have limited administrative authority on behalf of Client to receive and transmit information and make decisions with respect to the Project. Said representative shall not, however, have authority to bind Client as to matters of governmental policy or fiscal policy, nor to contract for additions or obligations exceeding a value which is the lesser of $5000 or 5% of the maximum contract price. (c) Client shall examine all documents presented by Consultant, and render decisions pertaining thereto within a reasonable time. The Client's approval of any drawings, specifications, reports, documents or other materials or product furnished hereunder shall not in any way relieve Consultant of responsibility for the professional adequacy of its work. (d) Client shall perform its obligations and render decisions within a reasonable time under the circumstances presented. Based upon the nature of Client and its requirements, a period of 14 days shall be presumed reasonable for any decision not involving policy decision or significant financial impact, when all information reasonably necessary for Client to responsibly render a decision has been furnished. A period of 46 days shall be presumed reasonable for Client to act with respect to any matter involving policy or significant financial impact. The above periods of presumed reasonableness shall be extended where information reasonably required is not within the custody or control of Client but must be procured from others.

  • CITY’S RESPONSIBILITIES 2.1. The CITY shall designate in writing a project coordinator to act as the CITY's representative with respect to the services to be rendered under this Agreement (the "Project Coordinator"). The Project Coordinator shall have authority to transmit instructions, receive information, interpret and define the CITY's policies and decisions with respect to the CONTRACTOR's services for the Project. However, the Project Coordinator is not authorized to issue any verbal or written orders or instructions to the CONTRACTOR that would have the effect, or be interpreted to have the effect, of modifying or changing in any way whatever: (a) The scope of services to be provided and performed by the CONTRACTOR; (b) The time the CONTRACTOR is obligated to commence and complete all such services; or (c) The amount of compensation the CITY is obligated or committed to pay the CONTRACTOR. Any such modifications or changes ((a) (b) or (c)) shall only be made by or upon the authorization of the CITY’s city manager as authorized by city council in the enabling legislation or in the CITY’s procurement policies. 2.2. The Project Coordinator shall: (a) Review and make appropriate recommendations on all requests submitted by the CONTRACTOR for payment for services and work provided and performed in accordance with this Agreement; (b) Arrange for access to and make all provisions for the CONTRACTOR to enter the Project site to perform the services to be provided by the CONTRACTOR under this Agreement; and (c) Provide notice to the CONTRACTOR of any deficiencies or defects discovered by the CITY with respect to the services to be rendered by the CONTRACTOR hereunder. 2.3. The CONTRACTOR acknowledges that access to the Project Site, to be arranged by the CITY for the CONTRACTOR, may be provided during times that are not the normal business hours of the CONTRACTOR.

  • Responsibilities of Contractor A. The Contractor shall perform all work on the described project as required by the Contract documents. The work to be performed includes the labor and services necessary to produce such replacement, and all materials, supplies, tools, transportation, equipment, and machinery required for replacement. B. This project bid includes all materials, labor and equipment to complete the reconstruction and resurfacing of streets as outlined in the Project Manual for WWREYN - XXXXXXXX SANITARY SEWER - PHASE 1 dated March 25th, 2021 as outlined in Attachment A.

  • Customer’s Responsibilities 9.1 If and to the extent applicable or under the control of the Customer, Customer shall provide complete and accurate information regarding requirements for the Project and the Site(s), including, without limitation, constraints, space requirements, underground or hidden facilities and structures, and all applicable drawings and specifications. 9.2 Customer shall prepare, file for, and use commercially reasonable efforts to obtain all Required Approvals necessary to perform its obligations under this Agreement. 9.3 Customer shall reasonably cooperate with Company as required to facilitate Company’s performance of the Work.

  • Responsibilities of the Parties 1.5.1 The Parties shall perform all obligations of this Agreement in accordance with all Applicable Laws and Regulations, Operating Requirements, and

  • Supplier’s Responsibilities 14.1 The Supplier shall supply all the Goods and Related Services included in the Scope of Supply in accordance with GCC Clause 12, and the Delivery and Completion Schedule, as per GCC Clause 13.

  • Contractor’s Responsibilities Unless stated specifically to the contrary in the tender with full supporting explanations, the contractor will be deemed to have concurred as a practical manufacturer with the design and layout of the works as being sufficient to ensure reliability and safety in operation, freedom from undue stresses and satisfactory performance in all other essentials as a working material.

  • Construction Responsibilities The party named in Article 1, Responsible Parties, under AGREEMENT is responsible for the following: A. Advertise for construction bids, issue bid proposals, receive and tabulate the bids, and award and administer the contract for construction of the Project. Administration of the contract includes the responsibility for construction engineering and for issuance of any change orders, supplemental agreements, amendments, or additional work orders that may become necessary subsequent to the award of the construction contract. In order to ensure federal funding eligibility, projects must be authorized by the State prior to advertising for construction. B. If the State is the responsible party, the State will use its approved contract letting and award procedures to let and award the construction contract. C. If the Local Government is the responsible party, the Local Government shall submit its contract letting and award procedures to the State for review and approval prior to letting. D. If the Local Government is the responsible party, the State must concur with the low bidder selection before the Local Government can enter into a contract with the vendor. E. If the Local Government is the responsible party, the State must review and approve change orders. F. Upon completion of the Project, the party responsible for constructing the Project will issue and sign a “Notification of Completion” acknowledging the Project’s construction completion and submit certification(s) sealed by a professional engineer(s) licensed in the State of Texas. G. For federally funded contracts, the parties to this Agreement will comply with federal construction requirements cited in 23 CFR Part 635 and with requirements cited in 23 CFR Part 633, and shall include the latest version of Form “FHWA-1273” in the contract bidding documents. If force account work will be performed, a finding of cost effectiveness shall be made in compliance with 23 CFR 635, Subpart B.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!