Rights of Businessperson Level Distributor Sample Clauses

Rights of Businessperson Level Distributor. The Distributor of Hylife (Businessperson Level) must order the products of Hylife (1,000 PV) at the same time or can purchase the products of Hylife for point accumulation until reaching 1,000 PV within three cycles after applying as Hylife membership. However, if the Distributor has introduced a new distributor when the Distributor has not reached 1,000 PV yet, the Distributor has no right to receive the benefit of the businessperson level from the introduction of the new distributor, unless there are purchases, reaching 1,000 PV within the three cycles of the business operations.
AutoNDA by SimpleDocs

Related to Rights of Businessperson Level Distributor

  • Ownership of Subject Shares; Total Shares As of the date hereof, such Stockholder is, and (except with respect to any Subject Shares Transferred in accordance with Section 4.1 hereof or accepted for payment pursuant to the Offer) at all times during the Agreement Period (as defined below) will be, the record and/or beneficial owner (as defined in Rule 13d-3 under the Exchange Act) of all such Stockholder’s Subject Shares and has good and marketable title to all such Subject Shares free and clear of any Liens, except for (a) any such Lien that may be imposed pursuant to (i) this Agreement and (ii) any applicable restrictions on transfer under the Securities Act or any state securities law and (b) community property interests under applicable Law (collectively, “Permitted Liens”). Except to the extent of any Subject Shares acquired after the date hereof (which shall become Subject Shares upon that acquisition), the number of Subject Shares listed on Schedule A opposite such Stockholder’s name are the only equity interests in the Company beneficially owned or owned of record by such Stockholder as of the date hereof. Other than the Subject Shares, such Stockholder does not own any shares of Company Common Stock, Company Stock Options or any other interests in, options to purchase or rights to subscribe for or otherwise acquire any securities of the Company and has no interest in or voting rights with respect to any securities of the Company.

  • Customer Ownership Customer owns and has sole responsibility for the accuracy, quality, integrity, and appropriateness of all original data, content and information provided to Xxxxxx Xxxxxxx in conjunction with the Services, and, when paid for, Customer will own all modified content and information as specified under the SOW (collectively the “Content,” which, together with the Customer’s trademarks or logos, are referred to as the “Customer Material).”

  • Can I Roll Over or Transfer Amounts from Other IRAs or Employer Plans If properly executed, you are allowed to roll over a distribution from one Traditional IRA to another without tax penalty. Rollovers between Traditional IRAs may be made once every 12 months and must be accomplished within 60 days after the distribution. Beginning in 2015, just one 60 day rollover is allowed in any 12 month period, inclusive of all Traditional, Xxxx, SEP, and SIMPLE IRAs owned. Under certain conditions, you may roll over (tax-free) all or a portion of a distribution received from a qualified plan or tax-sheltered annuity in which you participate or in which your deceased spouse participated. In addition, you may also make a rollover contribution to your Traditional IRA from a qualified deferred compensation arrangement. Amounts from a Xxxx XXX may not be rolled over into a Traditional IRA. If you have a 401(k), Xxxx 401(k) or Xxxx 403(b) and you wish to rollover the assets into an IRA you must roll any designated Xxxx assets, or after tax assets, to a Xxxx XXX and roll the remaining plan assets to a Traditional IRA. In the event of your death, the designated beneficiary of your 401(k) Plan may have the opportunity to rollover proceeds from that Plan into a Beneficiary IRA account. In general, strict limitations apply to rollovers, and you should seek competent advice in order to comply with all of the rules governing rollovers. Most distributions from qualified retirement plans will be subject to a 20% withholding requirement. The 20% withholding can be avoided by electing a “direct rollover” of the distribution to a Traditional IRA or to certain other types of retirement plans. You should receive more information regarding these withholding rules and whether your distribution can be transferred to a Traditional IRA from the plan administrator prior to receiving your distribution.

  • Admission of the Corporate Taxpayer into a Consolidated Group; Transfers of Corporate Assets (a) If the Corporate Taxpayer is or becomes a member of an affiliated or consolidated group of corporations that files a consolidated income tax return pursuant to Sections 1501 et seq. of the Code or any corresponding provisions of state or local law, then: (i) the provisions of this Agreement shall be applied with respect to the group as a whole; and (ii) Tax Benefit Payments, Early Termination Payments and other applicable items hereunder shall be computed with reference to the consolidated taxable income of the group as a whole. (b) If any entity that is obligated to make a Tax Benefit Payment or Early Termination Payment hereunder transfers one or more assets to a corporation (or a Person classified as a corporation for U.S. federal income tax purposes) with which such entity does not file a consolidated tax return pursuant to Section 1501 of the Code, such entity, for purposes of calculating the amount of any Tax Benefit Payment or Early Termination Payment (e.g., calculating the gross income of the entity and determining the Realized Tax Benefit of such entity) due hereunder, shall be treated as having disposed of such asset in a fully taxable transaction on the date of such contribution. The consideration deemed to be received by such entity shall be equal to the fair market value of the contributed asset. For purposes of this Section 7.11, a transfer of a partnership interest shall be treated as a transfer of the transferring partner’s share of each of the assets and liabilities of that partnership.

  • Certification as Small Contractor or Minority Business Enterprise This paragraph was intentionally left blank.

  • Allocation of Relative Fault Solely for purposes of determining relative fault pursuant to this Section 4.7: (i) any fault associated with the business conducted with the Delayed SpinCo Assets or Delayed SpinCo Liabilities (except for the gross negligence or intentional misconduct of a member of the Parent Group) or with the ownership, operation or activities of the SpinCo Business prior to the Effective Time shall be deemed to be the fault of SpinCo and the other members of the SpinCo Group, and no such fault shall be deemed to be the fault of Parent or any other member of the Parent Group; (ii) any fault associated with the business conducted with Delayed Parent Assets or Delayed Parent Liabilities (except for the gross negligence or intentional misconduct of a member of the SpinCo Group) shall be deemed to be the fault of Parent and the other members of the Parent Group, and no such fault shall be deemed to be the fault of SpinCo or any other member of the SpinCo Group; and (iii) any fault associated with the ownership, operation or activities of the Parent Business prior to the Effective Time shall be deemed to be the fault of Parent and the other members of the Parent Group, and no such fault shall be deemed to be the fault of SpinCo or any other member of the SpinCo Group.

  • Covered Entities No Loan Party is a Covered Entity.

  • Sector Sub-Sector Industry Classification Level of Government Type of Obligation Description of Measure Source of Measure All sectors : : - : Central : National Treatment Senior Management and Board of Directors : National Treatment and the Senior Management and Board of Directors obligations shall not apply to any measure relating to small and medium sized domestic market enterprise2. Foreign equity is restricted to a maximum of 40% for domestic market enterprises with paid-in equity capital of less than the equivalent of USD 200,000 Note: Members of the Board of Directors or governing body of corporation or associations shall be allowed in proportion to their allowable participation or share in the capital of such enterprises. : -1987 Constitution of the Republic of the Philippines. - Foreign Investments Act of 1991 (R.A. No. 7042, as amended by R.A. No. 8179). -Presidential and Administrative Issuances. ∞ 2 The concept of a small and medium sized domestic market enterprise is an enterprise with paid in equity capital of less than the equivalent of USD 200,000.00.

  • Can I Roll Over or Transfer Amounts from Other IRAs You are allowed to “roll over” a distribution or transfer your assets from one Xxxx XXX to another without any tax liability. Rollovers between Xxxx IRAs are permitted every 12 months and must be accomplished within 60 days after the distribution. Beginning in 2015, just one 60 day rollover is allowed in any 12 month period, inclusive of all Traditional, Xxxx, SEP, and SIMPLE IRAs owned. If you are single, head of household or married filing jointly, you may convert amounts from another individual retirement plan (such as a Traditional IRA) to a Xxxx XXX, there are no AGI restrictions. Mandatory required minimum distributions from Traditional IRAs, must be removed from the Traditional IRA prior to conversion. Rollover amounts (except to the extent they represent non-deductible contributions) are includable in your income and subject to tax in the year of the conversion, but such amounts are not subject to the 10% penalty tax. However, if an amount rolled over from a Traditional IRA is distributed from the Xxxx XXX before the end of the five-tax-year period that begins with the first day of the tax year in which the rollover is made, a 10% penalty tax will apply. Effective in the tax year 2008, assets may be directly rolled over (converted) from a 401(k) Plan, 403(b) Plan or a governmental 457 Plan to a Xxxx XXX. Subject to the foregoing limits, you may also directly convert a Traditional IRA to a Xxxx XXX with similar tax results. Furthermore, if you have made contributions to a Traditional IRA during the year in excess of the deductible limit, you may convert those non-deductible IRA contributions to contributions to a Xxxx XXX (assuming that you otherwise qualify to make a Xxxx XXX contribution for the year and subject to the contribution limit for a Xxxx XXX). You must report a rollover or conversion from a Traditional IRA to a Xxxx XXX by filing Form 8606 as an attachment to your federal income tax return. Beginning in 2006, you may roll over amounts from a “designated Xxxx XXX account” established under a qualified retirement plan. Xxxx XXX, Xxxx 401(k) or Xxxx 403(b) assets may only be rolled over either to another designated Xxxx Qualified account or to a Xxxx XXX. Upon distribution of employer sponsored plans the participant may roll designated Xxxx assets into a Xxxx XXX but not into a Traditional IRA. In addition, Xxxx assets cannot be rolled into a Profit-Sharing-only plan or pretax deferral-only 401(k) plan. In the event of your death, the designated beneficiary of your Xxxx 401(k) or Xxxx 403(b) Plan may have the opportunity to rollover proceeds from that Plan into a Beneficiary Xxxx XXX account. Strict limitations apply to rollovers, and you should seek competent advice in order to comply with all of the rules governing any type of rollover.

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!