Search, Enquiry, Investigation, Examination And Verification a. The Property is sold on an “as is where is basis” subject to all the necessary inspection, search (including but not limited to the status of title), enquiry (including but not limited to the terms of consent to transfer and/or assignment and outstanding charges), investigation, examination and verification of which the Purchaser is already advised to conduct prior to the auction and which the Purchaser warrants to the Assignee has been conducted by the Purchaser’s independent legal advisors at the time of execution of the Memorandum. b. The intending bidder or the Purchaser is responsible at own costs and expenses to make and shall be deemed to have carried out own search, enquiry, investigation, examination and verification on all liabilities and encumbrances affecting the Property, the title particulars as well as the accuracy and correctness of the particulars and information provided. c. The Purchaser shall be deemed to purchase the Property in all respects subject thereto and shall also be deemed to have full knowledge of the state and condition of the Property regardless of whether or not the said search, enquiry, investigation, examination and verification have been conducted. d. The Purchaser shall be deemed to have read, understood and accepted these Conditions of Sale prior to the auction and to have knowledge of all matters which would have been disclosed thereby and the Purchaser expressly warrants to the Assignee that the Purchaser has sought independent legal advice on all matters pertaining to this sale and has been advised by his/her/its independent legal advisor of the effect of all the Conditions of Sale. e. Neither the Assignee nor the Auctioneer shall be required or bound to inform the Purchaser of any such matters whether known to them or not and the Purchaser shall raise no enquiry, requisition or objection thereon or thereto.
Specialists Persons working within a juridical person who possess uncommon knowledge essential to the commercial presence’s production, research equipment, techniques or management. In assessing such knowledge, account will be taken not only of knowledge specific to the commercial presence, but also of whether the person has a high level of qualification referring to a type of work or trade requiring specific technical knowledge, including membership of an accredited profession.
Faculty Selection, Supervision, and Evaluation A. Faculty for a dual credit course will be approved and employed by Hill College. The instructor must meet credential requirements of Hill College and minimum requirements as specified by the Southern Association of Colleges and Schools Commission on Colleges (SACSCOC). Each faculty member assigned to teach an academic course will have a master’s degree plus 18 hours in the specific discipline. Technical course instructors will have at least an associate degree and three years of work experience in the related business or industry. B. Instructors teaching dual credit courses must meet the same standards, review, and approval procedures as full- time, regular Hill College faculty. C. Faculty for a dual credit course who are not a full-time faculty member of Hill College report directly to the appropriate Xxxx of Instruction for the pathway in which the course(s) is being taught. The college shall supervise and evaluate part-time faculty teaching dual credit courses using the same or comparable procedures used for full-time faculty employed by college. D. The performance appraisal process for dual credit instructors will be conducted by the immediate supervisor and reviewed by the second line supervisor prior to the appraisal interview with the employee. The dual credit faculty evaluation process will mirror the evaluation process used at the college for all full-time faculty members and will be done according to the college policy manual. All dual credit faculty will be periodically evaluated using the following means: 1) random classroom observation by the immediate supervisor of that discipline, 2) student evaluations and 3) self-evaluation. E. All Dual Credit faculty instructors will be supervised by the following means: i. When dual credit classes are visited during a classroom observation, supervisors will ask to see items such as the textbook, observe instruction and interaction with students, and request a class syllabus and a sample of class tests, quizzes, labs, and/or projects. ii. Dual Credit instructors are given a self-evaluation form and are asked to fill it out and return the form to their Hill College supervisor. iii. All dual credit instructors are given a master syllabus for the course. The master syllabus provides grading policy and student learning outcomes. iv. All dual credit instructors are required to participate in the assessment process. v. All dual credit instructors are required to certify rosters. vi. All dual credit instructors are required to submit final grades. F. Faculty teaching courses, which result in the award of college credit, will be regularly employed faculty members of Hill College. All faculty selected by Hill College to teach dual credit classes will be considered employees of Hill College and will be compensated by the college in accordance with Hill College policy, procedures, and guidelines. G. Applications for employment and official transcripts from each college or university attended MUST be submitted and approved prior to the start of classes. All paperwork will be kept on file at Hill College.
Inspections and Tests 26.1 The Supplier shall at its own expense and at no cost to the Procuring Entity carry out all such tests and/or inspections of the Goods and Related Services as are specified in the SCC. 26.2 The inspections and tests may be conducted on the premises of the Supplier or its Subcontractor, at point of delivery, and/or at the Goods' final destination, or in another place in Kenya as specified in the SCC. Subject to GCC Sub-Clause 26.3, if conducted on the premises of the Supplier or its Subcontractor, all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring Entity. 26.3 The Procuring Entity or its designated representative shall be entitled to attend the tests and/or inspections referred to in GCC Sub-Clause 26.2, provided that the Procuring Entity bear all of its own costs and expenses incurred in connection with such attendance including, but not limited to, all travelling and board and lodging expenses. 26.4 Whenever the Supplier is ready to carry out any such test and inspection, it shall give a reasonable advance notice, including the place and time, to the Procuring Entity. The Supplier shall obtain from any relevant third party or manufacturer any necessary permission or consent to enable the Procuring Entity or its designated representative to attend the test and/or inspection. 26.5 The Procuring Entity may require the Supplier to carry out any test and/or inspection not required by the Contract but deemed necessary to verify that the characteristics and performance of the Goods comply with the technical specifications codes and standards under the Contract, provided that the Supplier's reasonable costs and expenses incurred in the carrying out of such test and/or inspection shall be added to the Contract Price. Further, if such test and/or inspection impedes the progress of manufacturing and/or the Supplier's performance of its other obligations under the Contract, due allowance will be made in respect of the Delivery Dates and Completion Dates and the other obligations so affected. 26.6 The Supplier shall provide the Procuring Entity with a report of the results of any such test and/or inspection. 26.7 The Procuring Entity may reject any Goods or any part thereof that fail to pass any test and/or inspection or do not conform to the specifications. The Supplier shall either rectify or replace such rejected Goods or parts thereof or make alterations necessary to meet the specifications at no cost to the Procuring Entity, and shall repeat the test and/or inspection, at no cost to the Procuring Entity, upon giving a notice pursuant to GCC Sub- Clause 26.4. 26.8 The Supplier agrees that neither the execution of a test and/or inspection of the Goods or any part thereof, nor the attendance by the Procuring Entity or its representative, nor the issue of any report pursuant to GCC Sub-Clause 26.6, shall release the Supplier from any warranties or other obligations under the Contract.
Inspection and Tests 3.8.1 The Procuring entity or its representative shall have the right to inspect and/or to test the goods to confirm their conformity to the Contract specifications. The Procuring entity shall notify the tenderer in writing in a timely manner, of the identity of any representatives retained for these purposes. 3.8.2 The inspections and tests may be conducted in the premises of the tenderer or its subcontractor(s), at point of delivery, and/or at the Goods’ final destination If conducted on the premises of the tenderer or its subcontractor(s), all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring entity. 3.8.3 Should any inspected or tested goods fail to conform to the Specifications, the Procuring entity may reject the equipment, and the tenderer shall either replace the rejected equipment or make alterations necessary to make specification requirements free of costs to the Procuring entity. 3.8.4 The Procuring entity’s right to inspect, test and where necessary, reject the goods after the Goods’ arrival shall in no way be limited or waived by reason of the equipment having previously been inspected, tested and passed by the Procuring entity or its representative prior to the equipment delivery. 3.8.5 Nothing in paragraph 3.8 shall in any way release the tenderer from any warranty or other obligations under this Contract.
Inspection and Testing Each Constructing Entity shall cause inspection and testing of the Interconnection Facilities that it constructs in accordance with the provisions of this section. The Construction Parties acknowledge and agree that inspection and testing of facilities may be undertaken as facilities are completed and need not await completion of all of the facilities that a Constructing Entity is building.
INVESTIGATIONS OF MISHAPS AND CLOSE CALLS In the case of a close call, mishap or mission failure, the Parties agree to provide assistance to each other in the conduct of any investigation. For all NASA mishaps or close calls, Partner agrees to comply with XXX 0000.0, "NASA Procedural Requirements for Mishap and Close Call Reporting, Investigating, and Recordkeeping".
Supervision of Contractor Personnel The Contractor must supply all necessary and sufficient supervision over the work that is being performed and will be held solely responsible for the conduct and performance of his employees or agents involved in work under the Agreement.
Examination and Review (i) After receipt of the Closing Working Capital Statement, Seller will have *** (***) days from the date on which Buyer has provided to Seller all access and information reasonably requested for such purposes (the “Review Period”) to review the Closing Working Capital Statement. During the Review Period, Seller and its accountants will have full access to the relevant books and records of Buyer, the personnel of, and work papers prepared by, Buyer and/or Buyer’s accountants to the extent that they relate to the Closing Working Capital Statement and to such historical financial information (to the extent in Buyer’s possession) relating to the Closing Working Capital Statement as Seller may reasonably request for the purpose of reviewing the Closing Working Capital Statement and to prepare a Statement of Objections. (ii) On or prior to the last day of the Review Period, Seller may object to the Closing Working Capital Statement by delivering to Buyer a written statement setting forth Seller’s objections in reasonable detail, indicating each disputed item or amount and the basis for Seller’s disagreement therewith (the “Statement of Objections”). If Seller fails to deliver the Statement of Objections before the expiration of the Review Period, then the Closing Working Capital Statement and the Post-Closing Adjustment, as the case may be, reflected in the Closing Working Capital Statement will be deemed to have been accepted by Seller. If Seller delivers the Statement of Objections before the expiration of the Review Period, Buyer and Seller will negotiate in good faith to resolve such objections within *** (***) days after the delivery of the Statement of Objections (the “Resolution Period”), and, if the same are so resolved within the Resolution Period, then the Post-Closing Adjustment and the Closing Working Capital Statement with such changes as may have been previously agreed in writing by Buyer and Seller, will be final and binding.
Clinical Management for Behavioral Health Services (CMBHS) System 1. request access to CMBHS via the CMBHS Helpline at (000) 000-0000. 2. use the CMBHS time frames specified by System Agency. 3. use System Agency-specified functionality of the CMBHS in its entirety. 4. submit all bills and reports to System Agency through the CMBHS, unless otherwise instructed.
