Tampering with the Device or Service Sample Clauses

Tampering with the Device or Service. You shall not change the electronic serial number or equipment identifier of the Device or to perform a factory reset of the Device without our prior written consent. We reserve the right to terminate your Service if we believe, in our sole and absolute discretion, that you have tampered with the Device. In the event of such termination, you will remain responsible for the full month’s charges to the end of the current term, including, without limitation, unbilled charges, plus a termination fee, if applicable, all of which will immediately become due and payable. You shall not attempt to hack or otherwise disrupt the Service or make any use of the Service that is inconsistent with its intended purpose.
Sample 1Sample 2Sample 3See All (51)
AutoNDA by SimpleDocs
Tampering with the Device or Service. You shall not change the electronic serial number or equipment identifier of the Device or to perform a factory reset of the Device without our prior written consent. We reserve the right to disconnect your Service if we believe, in our sole and absolute discretion, that you have tampered with the Device. In the event of such disconnection, you will remain responsible for the full month's charges to the end of the current term, including, without limitation, unbilled charges, plus a disconnection fee, if applicable, all of which will immediately become due and payable. You shall not attempt
Sample 1See All (6)
Tampering with the Device or Service. Client shall not change the electronic serial number or equipment identifier of the Device or perform a reset of the Device without the prior written consent of Secarus. Secarus reserves the right to disconnect Service if Secarus believes, in their sole and absolute discretion, that Client has tampered with the Device. In the event of such disconnection, Client will remain responsible for the full month's charges to the end of the current term, including, without limitation, unbilled charges, plus a disconnection fee, if applicable, all of which will immediately become due and payable. Client shall not attempt to hack or otherwise disrupt the Service or make any use of the Service that is inconsistent with its intended purpose.
Sample 1
Tampering with the Device or Service. You shall not change the electronic serial number or equipment identifier of the Device or to perform a factory reset of the Device without our prior written consent. We
Sample 1
Tampering with the Device or Service. You shall not change the electronic serial number or equipment identifier of any Facilities (including the Device) or to perform a factory reset of the Device without our prior written consent. We reserve the right to terminate your VOIP Service if we believe, in our sole and absolute discretion, that you have tampered with the device. In the event of such termination, you will remain responsible for the full month’s charges to the end of the current term, including, without limitation, unbilled charges, plus a termination fee, if applicable, all of which will immediately become due and payable. You shall not attempt to hack or otherwise disrupt the VOIP Service or make any use of the VOIP Service that is inconsistent with its intended purpose.
Sample 1
Tampering with the Device or Service. You agree not to change the electronic serial number or equipment identifier of the Device, or to perform a factory reset of the Device, without express permission from VoiceLift in each instance which VoiceLift may deny in its sole discretion. VoiceLift reserves the right to terminate your Service should you tamper with the Device, leaving you responsible for the full month's charges to the end of the current term, including without limitation unbilled charges, plus a disconnect fee, all of which immediately become due and payable. You agree not to hack or disrupt the service or to make any use of the Service that is inconsistent with its intended purpose or to attempt to do so.
Sample 1

Related to Tampering with the Device or Service

  • Usage for Voice Mail Message Service Rated Incollects (originated in BellSouth and from other companies) can also be on Optional Daily Usage File. Rated Incollects will be intermingled with BellSouth recorded rated and unrated usage. Rated Incollects will not be packed separately.

  • How to Obtain Warranty Service The Warranty Holder must inspect the Flooring for Manufacturing Defects caused by improper milling, grading, staining, and coating, and report any such defects to Cali Bamboo, prior to installation of the Flooring. To obtain warranty service, the Warranty Holder must contact Cali Bamboo’s Customer Experience Department: xxxxxxxxxxxxxxx@xxxxxxxxxx.xxx/ 000- 000-0000. Warranty claims must be received within 30 calendar days after the Warranty Holder identifies the Manufacturing Defect or other basis for a warranty claim. To be covered under this Cali Bamboo limited warranty, the Warranty Holder must provide documentation of sales order and proof that the Flooring was properly installed in accordance with the Installation Guide (defined below). Cali Bamboo reserves the right to retain a certified and independent National Wood Flooring Association inspector (“NWFA Inspector”) to verify the Warranty Holder’s warranty claims. The determination of the NWFA Inspector regarding the warranty claim is not binding on either Cali Bamboo or on the Warranty Holder. A determination that does not verify the warranty claim shall not affect the Warranty Holder’s right to submit its claim to arbitration in accordance with the terms of the Arbitration Agreement (as defined in Cali Bamboo’s Terms and Conditions of Purchase). The performance of the inspection, however, if requested by Xxxx Xxxxxx and assuming that Xxxx Xxxxxx advances the full cost of the inspection as described above, is a requirement for the Warranty Holder to submit a warranty claim to arbitration under the Arbitration Agreement. For specific instructions on how to obtain warranty service for defective Flooring, visit the Cali Bamboo website xxxxx://xxx.xxxxxxxxxx.xxx/flooring-warranty/. This limited warranty covers Flooring that is both (i) installed with strict adherence to Cali Bamboo’s Odyssey Engineered flooring installation guide found online at xxxxx://xxx.xxxxxxxxxx.xxx/flooring-installation/ (the “Installation Guide”) and

  • Mail Service Interruption If by reason of any interruption of mail service, actual or threatened, any notice to be given to the Trustee would reasonably be unlikely to reach its destination by the time notice by mail is deemed to have been given pursuant to Section 13.3, such notice shall be valid and effective only if delivered at the appropriate address in accordance with Section 13.3.

  • Interruption of Use Tenant agrees that Landlord shall not be liable for damages, by abatement of Rent or otherwise, for failure to furnish or delay in furnishing any service (including telephone and telecommunication services), or for any diminution in the quality or quantity thereof, when such failure or delay or diminution is occasioned, in whole or in part, by breakage, repairs, replacements, or improvements, by any strike, lockout or other labor trouble, by inability to secure electricity, gas, water, or other fuel at the Building or Project after reasonable effort to do so, by any riot or other dangerous condition, emergency, accident or casualty whatsoever, by act or default of Tenant or other parties, or by any other cause beyond Landlord's reasonable control; and such failures or delays or diminution shall never be deemed to constitute an eviction or disturbance of Tenant's use and possession of the Premises or relieve Tenant from paying Rent or performing any of its obligations under this Lease. Furthermore, Landlord shall not be liable under any circumstances for a loss of, or injury to, property or for injury to, or interference with, Tenant's business, including, without limitation, loss of profits, however occurring, through or in connection with or incidental to a failure to furnish any of the services or utilities as set forth in this Article 6.

  • Warranty Service In-home 07/13

  • Processing of a Grievance It is recognized and accepted by the Union and the Employer that the processing of grievances as hereinafter provided is limited by the job duties and responsibilities of the employees and shall therefore be accomplished during normal working hours only when consistent with such employee duties and responsibilities. The aggrieved employee and a Union representative shall be allowed a reasonable amount of time without loss of pay when a grievance is investigated and presented to the Employer during normal working hours provided that the employee and the Union representative have notified and received the approval of the designated supervisor who has determined that such absence is reasonable and would not be detrimental to the work programs of the Employer.

  • Emergency Standby for Goods and/or Services If any Federal or State official, having authority to do so, declares an emergency or the occurrence of a natural disaster within the State of Connecticut, DAS and the Client Agency may request the Goods and Services on an expedited and prioritized basis. Upon receipt of such a request the Contractor shall make all necessary and appropriate commercially reasonable efforts to reallocate its staffing and other resources in order to give primary preference to Performing this Contract ahead of or prior to fulfilling, in whole or in part, any other contractual obligations that the Contractor may have. The Contractor is not obligated to make those efforts to Perform on an expedited and prioritized basis in accordance with this paragraph if doing so will make the Contractor materially breach any other contractual obligations that the Contractor may have. Contractor shall acknowledge receipt of any request made pursuant to this paragraph within 2 hours from the time that the Contractor receives it via purchase order or through a request to make an expedited or prioritized purchase through the State of Connecticut Purchasing Card (MasterCard) Program (the “P-Card Program”). If the Contractor fails to acknowledge receipt within 2 hours, confirm its obligation to Perform or actually Perform, as set forth in the purchase order or through the P-Card Program, then DAS and the Client Agency may procure the Performance from another source without further notice to Contractor and without creating any right of recourse at law or in equity against DAS or Client Agency.

  • Mail Service 1. The Union shall be authorized to use the Agency’s internal mail distribution system, and the electronic mail system (e-mail), to conduct Union business which is necessary for the effective representation of bargaining unit employees. 2. Union representatives shall observe all Agency rules and regulations governing the use of mail distribution systems (electronic or otherwise). Failure to do so may result in denial of access of use.

  • CHANGES TO PRODUCT OR SERVICE OFFERINGS a. Product or Service Discontinuance Where Contractor is the Product Manufacturer/Developer, and Contractor publicly announces to all U.S. customers (“date of notice”) that a Product is being withdrawn from the U.S. market or that maintenance service or technical support provided by Contractor (“withdrawn support”) is no longer going to be offered, Contractor shall be required to: (i) notify the Commissioner, each Licensee and each Authorized User then under contract for maintenance or technical support in writing of the intended discontinuance; and (ii) continue to offer Product or withdrawn support upon the Contract terms previously offered for the greater of: a) the best terms offered by Contractor to any other customer, or b) not less than twelve (12) months from the date of notice; and (iii) at Authorized User’s option, provided that the Authorized User is under contract for maintenance on the date of notice, either: provide the Authorized User with a Product replacement or migration path with at least equivalent functionality at no additional charge to enable Authorized User to continue use and maintenance of the Product. In the event that the Contractor is not the Product Manufacturer, Contractor shall be required to: (i) provide the notice required under the paragraph above, to the entities described within five (5) business days of Contractor receiving notice from the Product Manufacturer, and (ii) include in such notice the period of time from the date of notice that the Product Manufacturer will continue to provide Product or withdraw support. The provisions of this subdivision (a) shall not apply or eliminate Contractor’s obligations where withdrawn support is being provided by an independent Subcontractor. In the event that such Subcontractor ceases to provide service, Contractor shall be responsible for subcontracting such service, subject to state approval, to an alternate Subcontractor.

  • Unbundled Network Terminating Wire (UNTW) 2.8.3.1 UNTW is unshielded twisted copper wiring that is used to extend circuits from an intra-building network cable terminal or from a building entrance terminal to an individual End User’s point of demarcation. It is the final portion of the Loop that in multi-subscriber configurations represents the point at which the network branches out to serve individual subscribers. 2.8.3.2 This element will be provided in MDUs and/or Multi-Tenants Units (MTUs) where either Party owns wiring all the way to the End User’s premises. Neither Party will provide this element in locations where the property owner provides its own wiring to the End User’s premises, where a third party owns the wiring to the End User’s premises.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!