TEST CUBES Sample Clauses
TEST CUBES. 11 Allow for preparing a set of three test cubes each size 150x150x150mm, sending them to an approved testing laboratory for testing and paying all charges in connection therewith. No 24 12 Edges, risers, ends and reveals not exceeding 300mm high or wide m 37 13 Slabs propped up not exceeding 1.5m high m2 8 14 Leave or form 500mm diameter opening in top of floor slab No 5 15 Mesh ref. No. 395 fabric reinforcement fixed horizontal in surface beds m2 21 SFD4 Bill No. 2 CONCRETE,FORMWORK AND REINFORCEMENT For preambles see "Specifications of materials and methods to be used - PW 371" Where sizes in descriptions are given in brick units, "one brick" shall represent the length and "half brick" the width of a brick Descriptions of hollow walls shall be deemed to include leaving every fifth perpend of the bottom course of the external skin open as a weep hole. Walls in two skins described as "bagged and sealed" shall be deemed to include having the outer face of the inner skin bagged with 1:6 cement and sand mixture and sealed with two coats "Brixeal" bitumen emulsion waterproofing coating. User note: The above preamble generally applies for works in hot and humid coastal areas Bricks shall be ordered timeously to obtain uniformity in size and colour Section No. 2 SFD4 Bill No. 3 MASONRY Descriptions of recessed pointing to fair face brickwork and face brickwork shall be deemed to include square recessed, hollow recessed, weathered pointing, etc
TEST CUBES. Allow for preparing a set of three test cubes each size 150x150x150mm, sending them to an approved testing laboratory for testing and paying all charges in connection therewith. No 3 9 Suface beds, slabs, etc. m² 23
TEST CUBES. 21 Allow for preparing a set of three concrete strength test cubes, each size 150 x 150 x 150mm, sending them to an approved independent testing laboratory for testing and paying all charges in connection therewith. (Provisional) No 2
TEST CUBES m2 2 m2 68 5 Allow for preparing a set of three concrete strength test cubes, each size 150 x 150 x 150mm, sending them to an approved Testing Laboratory for testing and paying all charges in connection therewith C : 36 D : 0 SMOOTH FORMWORK (DEGREE OF ACCURACY I) Sets 36 6 Edges, risers, ends and reveals not exceeding 300mm high or wide C : 2 D : 0 7 8mm Diameter bars C : 0.90 D : 0.00 8 10mm Diameter bars C : 0.70 D : 0.00 m 2 t 0.90 t 0.70 9 Mesh ref. No. 395 fabric reinforcement fixed horizontal in surface beds C : 84 D : 0 m2 84 Section No. 2 BUILDING Bill No. 3 CONCRETE, FORMWORK & REINFORCEMENT Total Brought Forward from Page No. 75 R Amount
TEST CUBES. 34 Allow for preparing a set of three concrete strength test cubes, each size 150 x 150 x 150mm, sending them to an approved Testing Laboratory for testing and paying all charges in connection therewith. C : 39 D : 0 Sets 39 35 One brick walls 36 One brick walls-in holes 37 Half brick wall brick-on-flat and projecting approximately 115mm built all around tank pit as support to Enviro loo tanks . 38 Half brick corbelling 39 150mm Wide reinforcement built in horizontally "Corobrick" "Letaba Satin Face bricks" pointed with recessed horizontal and vertical joints 40 Extra over brickwork for face brickwork m2 92 m2 87 m 65 m 44 m 1 781 m2 78 Section No. 2 BUILDING Bill No. 2 FOUNDATIONS COLLECTION Total Brought Forward from Page No. 66 67 68 69 70 71 R Amount
TEST CUBES. 34 Allow for preparing a set of three concrete strength test cubes, each size 150 x 150 x 150mm, sending them to an approved Testing Laboratory for testing and paying all charges in connection therewith. C : 0 D : 29 Sets 29 35 One brick walls C : 0 D : 79 36 One brick walls-in holes C : 0 D : 123 37 Half brick wall brick-on-flat and projecting approximately 115mm built all around tank pit as support to Enviro loo tanks . C : 0 D : 101 38 Half brick corbelling C : 0 D : 51 39 150mm Wide reinforcement built in horizontally C : 0 D : 2123
TEST CUBES. 11 Allow for preparing a set of three test cubes each size 150x150x150mm, sending them to an approved testing laboratory for testing and paying all charges in connection therewith. No 24 12 Edges, risers, ends and reveals not exceeding 300mm high or wide m 39 13 Slabs propped up not exceeding 1.5m high m2 10 14 Leave or form 500mm diameter opening in top of floor slab No 6 15 Mesh ref. No. 395 fabric reinforcement fixed horizontal in surface beds m2 25 FD5 Bill No. 2 CONCRETE,FORMWORK AND REINFORCEMENT
TEST CUBES. All tests done by the "Ready mix" supplier must be made available free of cost to the Engineer for approval. If the Engineer deems it necessary he will order supplementary tests to be done by an independant laboratory as measured below. 13 Making and testing 150 x 150 x 150mm concrete strength test cube (Provisional) No 9
TEST CUBES. 13 Allow for preparing a set of three concrete strength test cubes, each size 150 x 150 x 150mm, sending them to an approved Testing Laboratory for testing and paying all charges in connection therewith. (Provisional) 1 : 0.0 2 : 0.0 4 : 0.0 7 : 0.0 A : 30.0 B : 30.0 C : 5.0 D : 10.0 E : 0.0 F : 50.0 G : 5.0 H : 10.0 I : 0.0 J : 0.0 K : 10.0 L : 0.0 M : 0.0 N : 20.0 O : 0.0 W : 0.0 Expansion joints with bitumen impregnated softboard between vertical concrete and brick surfaces 14 15mm Joints exceeding 300mm high (Provisional) 1 : 0 2 : 0 4 : 0 7 : 0 A : 59 B : 77 C : 15 D : 17 E : 0 F : 104 G : 28 H : 27 I : 0 J : 0 K : 26 L : 0 M : 0 X : 0 N : 131 O : 0 W : 0 15 Saw cut joints in top of concrete (Provisional) 1 : 0 2 : 0 4 : 0 7 : 0 A : 59 B : 154 C : 25 D : 34 E : 0 F : 692 G : 31 H : 23 I : 0 J : 0 K : 23 L : 0 M : 0 X : 0 N : 212 O : 0 W : 0 m 1,252
TEST CUBES. 4 Allow for preparing a set of three concrete strenght test cubes, each size 150 x 150 x 150mm, sending them to an approved independent testing laboratory for testing and paying all charges in connection therewith. (Provisional) No 6