We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.

For more information visit our privacy policy.

Common use of Test procedure Clause in Contracts

Test procedure. The tested-device shall be stored for at least six hours at a test temperature equal to 60 °C ± 2 °C or higher if requested by the manufacturer, followed by storage for at least six hours at a test temperature equal to -40 °C ± 2 °C or lower if requested by the manufacturer. The maximum time interval between test temperature extremes shall be 30 minutes. This procedure shall be repeated until a minimum of 5 total cycles are completed, after which the tested-device shall be stored for 24 hours at an ambient temperature of 20 °C ± 10 °C. After the storage for 24 hours, a standard cycle as described in Xxxxx 0, Xxxxxxxx 0 xxxxx xx conducted, if not inhibited by the tested-device. The test shall end with an observation period of 1 h at the ambient temperature conditions of the test environment.

Appears in 2 contracts

Samples: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles

Test procedure. The tested-device shall be stored for at least six hours at a test temperature equal to 60 °C ± 2 °C or higher if requested by the manufacturer, followed by storage for at least six hours at a test temperature equal to -40 °C ± 2 °C or lower if requested by the manufacturer. The maximum time interval between test temperature extremes shall be 30 minutes. This procedure shall be repeated until a minimum of 5 total cycles are completed, after which the tested-device shall be stored for 24 hours at an ambient temperature of 20 °C ± 10 °C. After the storage for 24 hours, a standard cycle as described in Xxxxx 0, Xxxxxxxx 0 xxxxx xx conducted, if not inhibited by the tested-device. The test shall end with an observation period of 1 h at the ambient temperature conditions of the test environment.

Appears in 2 contracts

Samples: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles

Test procedure. The testedTested-device Device shall be stored for at least six hours at a test temperature equal to 60 °C ± 2 °C or higher if requested by the manufacturer, followed by storage for at least six hours at a test temperature equal to -40 °C ± 2 °C or lower if requested by the manufacturer. The maximum time interval between test temperature extremes shall be 30 minutes. This procedure shall be repeated until a minimum of 5 total cycles are completed, after which the testedTested-device Device shall be stored for 24 hours at an ambient temperature of 20 °C 22 ± 10 5 °C. After the storage for 24 hours, a standard cycle as described in Xxxxx 0, Xxxxxxxx 0 xxxxx xx conducted, if not inhibited by the testedTested-deviceDevice. The test shall end with an observation period of 1 h at the ambient temperature conditions of the test environment.

Appears in 2 contracts

Samples: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles

Test procedure. The testedTested-device Device shall be stored for at least six hours at a test temperature equal to 60 °C ± 2 °C or higher if requested by the manufacturer, followed by storage for at least six hours at a test temperature equal to -40 °C ± 2 °C or lower if requested by the manufacturer. The maximum time interval between test temperature extremes shall be 30 minutes. This procedure shall be repeated until a minimum of 5 total cycles are completed, after which the tested-device Tested- Device shall be stored for 24 hours at an ambient temperature of 20 °C 22 ± 10 5 °C. After the storage for 24 hours, a standard cycle as described in Xxxxx 0Annex 9, Xxxxxxxx Appexxxx 0 xxxxx xx conductedxxxxxxxxx, if xf not inhibited by the testedTested-deviceDevice. The test shall end with an observation period of 1 h at the ambient temperature conditions of the test environment.

Appears in 2 contracts

Samples: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles

Test procedure. The testedTested-device Device shall be stored for at least six hours at a test temperature equal to 60 °C ± 2 °C or higher if requested by the manufacturer, followed by storage for at least six hours at a test temperature equal to -40 °C ± 2 °C or lower if requested by the manufacturer. The maximum time interval between test temperature extremes shall be 30 minutes. This procedure shall be repeated until a minimum of 5 total cycles are completed, after which the tested-device Tested- Device shall be stored for 24 hours at an ambient temperature of 20 °C 22 ± 10 5 °C. After the storage for 24 hours, a standard cycle as described in Xxxxx 0Annex 9, Xxxxxxxx 0 xxxxx xx Appendix 1 shall be conducted, if not inhibited by the testedTested-deviceDevice. The test shall end with an observation period of 1 h at the ambient temperature conditions of the test environment.

Appears in 1 contract

Samples: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles

Test procedure. The testedTested-device Device shall be stored for at least six hours at a test temperature equal to 60 °C ± 2 °C or higher if requested by the manufacturer, followed by storage for at least six hours at a test temperature equal to -40 °C ± 2 °C or lower if requested by the manufacturer. The maximum time interval between test temperature extremes shall be 30 minutes. This procedure shall be repeated until a minimum of 5 total cycles are completed, after which the testedTested-device Device shall be stored for 24 hours at an ambient temperature of 20 °C 22 ± 10 5 °C. After the storage for 24 hours, a standard cycle as described in Xxxxx 0Annex 9, Xxxxxxxx 0 xxxxx xx Appendix 1 shall be conducted, if not inhibited by the testedTested-deviceDevice. The test shall end with an observation period of 1 h at the ambient temperature conditions of the test environment.

Appears in 1 contract

Samples: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles

Test procedure. The tested-device shall be stored for at least six hours at a test temperature equal to 60 °C ± 2 °C or higher if requested by the manufacturer, followed by storage for at least six hours at a test temperature equal to -40 °C ± 2 °C or lower if requested by the manufacturer. The maximum time interval between test temperature extremes shall be 30 minutes. This procedure shall be repeated until a minimum of 5 total cycles are completed, after which the tested-device shall be stored for 24 hours at an ambient temperature of 20 °C ± 10 °C. After the storage for 24 hours, a standard cycle as described in Xxxxx 0Annex 8, Xxxxxxxx 0 xxxxx xx Appendix 1 shall be conducted, if not inhibited by the tested-device. The test shall end with an observation period of 1 h at the ambient temperature conditions of the test environment.

Appears in 1 contract

Samples: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles