Common use of Unbundled Loop Modifications (Line Conditioning Clause in Contracts

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone which has over 6kft of combined bridged tap will be modified, upon request from EZ Phone, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ Phone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ Phone, EZ Phone will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone is available at the location for which the ULM was requested, EZ Phone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone Sail Networks which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneSail Networks, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneSail Networks. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone Sail Networks may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Sail Networks requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone Sail Networks will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone Sail Networks shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone Sail Networks desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneSail Networks, EZ Phone Sail Networks will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone Sail Networks is available at the location for which the ULM was requested, EZ Phone Sail Networks will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Sail Networks will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone Velocity which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneVelocity, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneVelocity. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone Velocity may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Velocity requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone Velocity will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone Velocity shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone Velocity desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneVelocity, EZ Phone Velocity will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone Velocity is available at the location for which the ULM was requested, EZ Phone Velocity will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Velocity will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone Deland Actel which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneDeland Actel, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneDeland Actel. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone Deland Actel may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Deland Actel requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone Deland Actel will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone Deland Actel shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone Deland Actel desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneDeland Actel, EZ Phone Deland Actel will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone Deland Actel is available at the location for which the ULM was requested, EZ Phone Deland Actel will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Deland Actel will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone Southern Light which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneSouthern Light, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneSouthern Light. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone Southern Light may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Southern Light requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone Southern Light will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone Southern Light shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone Southern Light desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneSouthern Light, EZ Phone Southern Light will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone Southern Light is available at the location for which the ULM was requested, EZ Phone Southern Light will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Southern Light will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone NTBS which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneNTBS, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneNTBS. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone NTBS may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone NTBS requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone NTBS will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone NTBS shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone NTBS desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneNTBS, EZ Phone NTBS will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone NTBS is available at the location for which the ULM was requested, EZ Phone NTBS will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone NTBS will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone Micro-Comm which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneMicro-Comm, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneMicro-Comm. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone Micro-Comm may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Micro-Comm requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone Micro-Comm will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone Micro-Comm shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone Micro-Comm desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneMicro-Comm, EZ Phone Micro-Comm will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone Micro-Comm is available at the location for which the ULM was requested, EZ Phone Micro-Comm will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Micro-Comm will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone Tel West which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneTel West, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneTel West. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone Tel West may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Tel West requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone Tel West will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone Tel West shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone Tel West desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneTel West, EZ Phone Tel West will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone Tel West is available at the location for which the ULM was requested, EZ Phone Tel West will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Tel West will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop Subloop that may diminish the capability of the Loop or Sub-loop Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000BellSouth’s TR73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper loops Loops and sub-loops Subloops that are less than 18kft 18,000 feet in length. 2.5.3 For any copper loop being ordered by EZ Phone Think 12 which has over 6kft six thousand (6,000) feet of combined bridged tap will be modified, upon request from EZ PhoneThink 12, so that the loop will have a maximum of 6kft six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to EZ PhoneThink 12. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop Loop that will result in a combined total of bridged tap between 2,500 two thousand five hundred (2,500) and 6kft six thousand (6,000) feet will be performed at the rates set forth in Exhibit A of this Attachment.A. 2.5.4 EZ Phone Think 12 may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0 ) and 2,500 two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Think 12 requests ULM on a reserved facility for a new loop Loop order, BellSouth may perform a pair change and provision a different loop Loop facility in lieu of the reserved facility with ULM if feasible. The loop Loop provisioned will meet or exceed specifications of the requested loop Loop facility as modified. EZ Phone Think 12 will not be charged for ULM if a different loop Loop is provisioned. For loops Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop Loop provisioned. 2.5.8 EZ Phone Think 12 shall request Loop make up information pursuant to this Attachment prior to submitting a SI service inquiry and/or a LSR for the Loop type that EZ Phone Think 12 desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneThink 12, EZ Phone Think 12 will submit a SI to BellSouth. If a spare Loop facility that meets the loop Loop modification specifications requested by EZ Phone Think 12 is available at the location for which the ULM was requested, EZ Phone Think 12 will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Think 12 will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop Subloop that may diminish the capability of the Loop or Sub-loop Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000BellSouth’s TR73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper loops Loops and sub-loops Subloops that are less than 18kft 18,000 feet in length. 2.5.3 For any copper loop being ordered by EZ Phone Preferred which has over 6kft six thousand (6,000) feet of combined bridged tap will be modified, upon request from EZ PhonePreferred, so that the loop will have a maximum of 6kft six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to EZ PhonePreferred. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop Loop that will result in a combined total of bridged tap between 2,500 two thousand five hundred (2,500) and 6kft six thousand (6,000) feet will be performed at the rates set forth in Exhibit A of this Attachment.A. 2.5.4 EZ Phone Preferred may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0 ) and 2,500 two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Preferred requests ULM on a reserved facility for a new loop Loop order, BellSouth may perform a pair change and provision a different loop Loop facility in lieu of the reserved facility with ULM if feasible. The loop Loop provisioned will meet or exceed specifications of the requested loop Loop facility as modified. EZ Phone Preferred will not be charged for ULM if a different loop Loop is provisioned. For loops Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop Loop provisioned. 2.5.8 EZ Phone Preferred shall request Loop make up information pursuant to this Attachment prior to submitting a SI service inquiry and/or a LSR for the Loop type that EZ Phone Preferred desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhonePreferred, EZ Phone Preferred will submit a SI to BellSouth. If a spare Loop facility that meets the loop Loop modification specifications requested by EZ Phone Preferred is available at the location for which the ULM was requested, EZ Phone Preferred will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Preferred will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone ONS which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneONS, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneONS. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone ONS may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone ONS requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone ONS will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone ONS shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone ONS desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneONS, EZ Phone ONS will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone ONS is available at the location for which the ULM was requested, EZ Phone ONS will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone ONS will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft 18,000 feet in length. 2.5.3 For any copper loop being ordered by EZ Phone Triarch Marketing which has over 6kft 6,000 feet of combined bridged tap will be modified, upon request from EZ PhoneTriarch Marketing, so that the loop will have a maximum of 6kft 6,000 feet of bridged tap. This modification will be performed at no additional charge to EZ PhoneTriarch Marketing. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone Triarch Marketing may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Triarch Marketing requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone Triarch Marketing will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone Triarch Marketing shall request Loop make up information pursuant to this Attachment prior to submitting a SI service inquiry and/or a LSR for the Loop type that EZ Phone Triarch Marketing desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneTriarch Marketing, EZ Phone Triarch Marketing will submit a SI service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone Triarch Marketing is available at the location for which the ULM was requested, EZ Phone Triarch Marketing will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Triarch Marketing will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone BSE which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneBSE, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneBSE. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone BSE may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone BSE requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone BSE will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone BSE shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone BSE desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneBSE, EZ Phone BSE will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone BSE is available at the location for which the ULM was requested, EZ Phone BSE will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone BSE will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft 18,000 feet in length. 2.5.3 For any copper loop being ordered by EZ Phone Xxxx which has over 6kft 6,000 feet of combined bridged tap will be modified, upon request from EZ PhoneXxxx, so that the loop will have a maximum of 6kft 6,000 feet of bridged tap. This modification will be performed at no additional charge to EZ PhoneXxxx. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone Xxxx may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Xxxx requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone Xxxx will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone Xxxx shall request Loop make up information pursuant to this Attachment prior to submitting a SI service inquiry and/or a LSR for the Loop type that EZ Phone Xxxx desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneXxxx, EZ Phone Xxxx will submit a SI service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone Xxxx is available at the location for which the ULM was requested, EZ Phone Xxxx will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Reed will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop Subloop that may diminish the capability of the Loop or Sub-loop Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000BellSouth’s TR73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper loops Loops and sub-loops Subloops that are less than 18kft 18,000 feet in length. 2.5.3 For any copper loop being ordered by EZ Phone Sprint which has over 6kft six thousand (6,000) feet of combined bridged tap will be modified, upon request from EZ PhoneSprint, so that the loop will have a maximum of 6kft six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to EZ PhoneSprint. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop Loop that will result in a combined total of bridged tap between 2,500 two thousand five hundred (2,500) and 6kft six thousand (6,000) feet will be performed at the rates set forth in Exhibit A of this Attachment.A. 2.5.4 EZ Phone Sprint may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 zero (0) and 2,500 two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Sprint requests ULM on a reserved facility for a new loop Loop order, BellSouth may perform a pair change and provision a different loop Loop facility in lieu of the reserved facility with ULM if feasible. The loop Loop provisioned will meet or exceed specifications of the requested loop Loop facility as modified. EZ Phone Sprint will not be charged for ULM if a different loop Loop is provisioned. For loops Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop Loop provisioned. 2.5.8 EZ Phone Sprint shall request Loop make up information pursuant to this Attachment prior to submitting a SI service inquiry and/or a LSR for the Loop type that EZ Phone Sprint desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneSprint, EZ Phone Sprint will submit a SI to BellSouth. If a spare Loop facility that meets the loop Loop modification specifications requested by EZ Phone Sprint is available at the location for which the ULM was requested, EZ Phone Sprint will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Sprint will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone Symtelco which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneSymtelco, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneSymtelco. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone Symtelco may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Symtelco requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone Symtelco will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone Symtelco shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone Symtelco desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneSymtelco, EZ Phone Symtelco will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone Symtelco is available at the location for which the ULM was requested, EZ Phone Symtelco will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Symtelco will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone NationsLink which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneNationsLink, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneNationsLink. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone NationsLink may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone NationsLink requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone NationsLink will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone NationsLink shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone NationsLink desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneNationsLink, EZ Phone NationsLink will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone NationsLink is available at the location for which the ULM was requested, EZ Phone NationsLink will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone NationsLink will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone PLI which has over 6kft of combined bridged tap will be modified, upon request from EZ PhonePLI, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhonePLI. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone PLI may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone PLI requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone PLI will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone PLI shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone PLI desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhonePLI, EZ Phone PLI will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone PLI is available at the location for which the ULM was requested, EZ Phone PLI will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone PLI will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone FLATEL which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneFLATEL, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneFLATEL. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone FLATEL may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone FLATEL requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone FLATEL will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone FLATEL shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone FLATEL desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneFLATEL, EZ Phone FLATEL will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone FLATEL is available at the location for which the ULM was requested, EZ Phone FLATEL will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone FLATEL will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone FPB which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneFPB, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneFPB. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone FPB may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone FPB requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone FPB will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone FPB shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone FPB desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneFPB, EZ Phone FPB will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone FPB is available at the location for which the ULM was requested, EZ Phone FPB will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone FPB will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone ABC Telcom which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneABC Telcom, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneABC Telcom. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone ABC Telcom may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone ABC Telcom requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone ABC Telcom will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone ABC Telcom shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone ABC Telcom desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneABC Telcom, EZ Phone ABC Telcom will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone ABC Telcom is available at the location for which the ULM was requested, EZ Phone ABC Telcom will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone ABC Telcom will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone Starlink which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneStarlink, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneStarlink. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone Starlink may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Starlink requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone Starlink will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone Starlink shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone Starlink desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneStarlink, EZ Phone Starlink will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone Starlink is available at the location for which the ULM was requested, EZ Phone Starlink will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Starlink will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone Victory which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneVictory, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneVictory. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone Victory may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Victory requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone Victory will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone Victory shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone Victory desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneVictory, EZ Phone Victory will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone Victory is available at the location for which the ULM was requested, EZ Phone Victory will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Victory will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft 18,000 feet in length. 2.5.3 For any copper loop being ordered by EZ Phone Unity Acquisition which has over 6kft 6,000 feet of combined bridged tap will be modified, upon request from EZ PhoneUnity Acquisition, so that the loop will have a maximum of 6kft 6,000 feet of bridged tap. This modification will be performed at no additional charge to EZ PhoneUnity Acquisition. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone Unity Acquisition may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Unity Acquisition requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone Unity Acquisition will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone Unity Acquisition shall request Loop make up information pursuant to this Attachment prior to submitting a SI service inquiry and/or a LSR for the Loop type that EZ Phone Unity Acquisition desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneUnity Acquisition, EZ Phone Unity Acquisition will submit a SI service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone Unity Acquisition is available at the location for which the ULM was requested, EZ Phone Unity Acquisition will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Unity Acquisition will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone Utility USA which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneUtility USA, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneUtility USA. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone Utility USA may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Utility USA requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone Utility USA will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone Utility USA shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone Utility USA desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneUtility USA, EZ Phone Utility USA will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone Utility USA is available at the location for which the ULM was requested, EZ Phone Utility USA will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Utility USA will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft 18,000 feet in length. 2.5.3 For any copper loop being ordered by EZ Phone e-Tel which has over 6kft 6,000 feet of combined bridged tap will be modified, upon request from EZ Phonee-Tel, so that the loop will have a maximum of 6kft 6,000 feet of bridged tap. This modification will be performed at no additional charge to EZ Phonee-Tel. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone e-Tel may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone e-Tel requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone e-Tel will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone e-Tel shall request Loop make up information pursuant to this Attachment prior to submitting a SI service inquiry and/or a LSR for the Loop type that EZ Phone e-Tel desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ Phonee- Tel, EZ Phone e-Tel will submit a SI service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone e-Tel is available at the location for which the ULM was requested, EZ Phone e-Tel will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone e-Tel will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone WorldxChange which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneWorldxChange, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneWorldxChange. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone WorldxChange may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process (SC) process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone WorldxChange requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone WorldxChange will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone WorldxChange shall request Loop make up information pursuant to this Attachment prior to submitting a SI service inquiry and/or a LSR for the Loop type that EZ Phone WorldxChange desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneWorldxChange, EZ Phone WorldxChange will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone WorldxChange is available at the location for which the ULM was requested, EZ Phone WorldxChange will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone WorldxChange will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone Advantage Group which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneAdvantage Group, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneAdvantage Group. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone Advantage Group may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Advantage Group requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone Advantage Group will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone Advantage Group shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone Advantage Group desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneAdvantage Group, EZ Phone Advantage Group will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone Advantage Group is available at the location for which the ULM was requested, EZ Phone Advantage Group will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Advantage Group will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop Subloop that may diminish the capability of the Loop or Sub-loop Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000BellSouth’s TR73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper loops Loops and sub-loops Subloops that are less than 18kft 18,000 feet in length. 2.5.3 For any copper loop being ordered by EZ Phone Starlink which has over 6kft six thousand (6,000) feet of combined bridged tap will be modified, upon request from EZ PhoneStarlink, so that the loop will have a maximum of 6kft six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to EZ PhoneStarlink. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop Loop that will result in a combined total of bridged tap between 2,500 two thousand five hundred (2,500) and 6kft six thousand (6,000) feet will be performed at the rates set forth in Exhibit A of this Attachment.A. 2.5.4 EZ Phone Starlink may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0 ) and 2,500 two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone Starlink requests ULM on a reserved facility for a new loop Loop order, BellSouth may perform a pair change and provision a different loop Loop facility in lieu of the reserved facility with ULM if feasible. The loop Loop provisioned will meet or exceed specifications of the requested loop Loop facility as modified. EZ Phone Starlink will not be charged for ULM if a different loop Loop is provisioned. For loops Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop Loop provisioned. 2.5.8 EZ Phone Starlink shall request Loop make up information pursuant to this Attachment prior to submitting a SI service inquiry and/or a LSR for the Loop type that EZ Phone Starlink desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneStarlink, EZ Phone Starlink will submit a SI to BellSouth. If a spare Loop facility that meets the loop Loop modification specifications requested by EZ Phone Starlink is available at the location for which the ULM was requested, EZ Phone Starlink will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone Starlink will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Budget Phone which has over 6kft of combined bridged tap will be modified, upon request from EZ Budget Phone, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ Budget Phone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Budget Phone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Budget Phone requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Budget Phone will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Budget Phone shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Budget Phone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ Budget Phone, EZ Budget Phone will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Budget Phone is available at the location for which the ULM was requested, EZ Budget Phone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Budget Phone will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone TWTC which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneTWTC, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneTWTC. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone TWTC may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone TWTC requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone TWTC will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone TWTC shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone TWTC desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneTWTC, EZ Phone TWTC will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone TWTC is available at the location for which the ULM was requested, EZ Phone TWTC will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone TWTC will not be charged for ULM but will only be charged the service order charges for submitting an order.

Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18kft in length. 2.5.3 For any copper loop being ordered by EZ Phone NOW which has over 6kft of combined bridged tap will be modified, upon request from EZ PhoneNOW, so that the loop will have a maximum of 6kft of bridged tap. This modification will be performed at no additional charge to EZ PhoneNOW. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6kft will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 EZ Phone NOW may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If EZ Phone NOW requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. EZ Phone NOW will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 EZ Phone NOW shall request Loop make up information pursuant to this Attachment prior to submitting a SI and/or a LSR for the Loop type that EZ Phone NOW desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for EZ PhoneNOW, EZ Phone NOW will submit a SI to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by EZ Phone NOW is available at the location for which the ULM was requested, EZ Phone NOW will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, EZ Phone NOW will not be charged for ULM but will only be charged the service order charges for submitting an order.