Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000. 2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18,000 feet in length. 2.5.3 For any copper loop being ordered by Ring Connection which has over 6,000 feet of combined bridged tap will be modified, upon request from Ring Connection, so that the loop will have a maximum of 6,000 feet of bridged tap. This modification will be performed at no additional charge to Ring Connection. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment. 2.5.4 Ring Connection may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If Ring Connection requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. Ring Connection will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned. 2.5.8 Ring Connection shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that Ring Connection desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for Ring Connection, Ring Connection will submit a service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by Ring Connection is available at the location for which the ULM was requested, Ring Connection will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, Ring Connection will not be charged for ULM but will only be charged the service order charges for submitting an order.
Appears in 1 contract
Samples: Clec Agreement
Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000.
2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18,000 feet in length.
2.5.3 For any copper loop being ordered by Ring Connection Georgia Prepaid which has over 6,000 feet of combined bridged tap will be modified, upon request from Ring ConnectionGeorgia Prepaid, so that the loop will have a maximum of 6,000 feet of bridged tap. This modification will be performed at no additional charge to Ring ConnectionGeorgia Prepaid. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment.AMENDMENT EXHIBIT 1 Attachment 2
2.5.4 Ring Connection Georgia Prepaid may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If Ring Connection Georgia Prepaid requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. Ring Connection Georgia Prepaid will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned.
2.5.8 Ring Connection Georgia Prepaid shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that Ring Connection Georgia Prepaid desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for Ring ConnectionGeorgia Prepaid, Ring Connection Georgia Prepaid will submit a service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by Ring Connection Georgia Prepaid is available at the location for which the ULM was requested, Ring Connection Georgia Prepaid will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, Ring Connection Georgia Prepaid will not be charged for ULM but will only be charged the service order charges for submitting an order.
Appears in 1 contract
Samples: Interconnection Agreement
Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000.
2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18,000 feet in length.
2.5.3 For any copper loop being ordered by Ring Connection ICG which has over 6,000 feet of combined bridged tap will be modified, upon request from Ring ConnectionICG, so that the loop will have a maximum of 6,000 feet of bridged tap. This modification will be performed at no additional charge to Ring ConnectionICG. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment.
2.5.4 Ring Connection ICG may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If Ring Connection ICG requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. Ring Connection ICG will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned.
2.5.8 Ring Connection ICG shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that Ring Connection ICG desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for Ring ConnectionICG, Ring Connection ICG will submit a service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by Ring Connection ICG is available at the location for which the ULM was requested, Ring Connection ICG will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, Ring Connection ICG will not be charged for ULM but will only be charged the service order charges for submitting an order.
Appears in 1 contract
Samples: Interconnection Agreement
Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000.
2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18,000 feet in length.
2.5.3 For any copper loop being ordered by Ring Connection Starlink which has over 6,000 feet of combined bridged tap will be modified, upon request from Ring ConnectionStarlink, so that the loop will have a maximum of 6,000 feet of bridged tap. This modification will be performed at no additional charge to Ring ConnectionStarlink. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment.
2.5.4 Ring Connection Starlink may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If Ring Connection Starlink requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. Ring Connection Starlink will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned.
2.5.8 Ring Connection Starlink shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that Ring Connection Starlink desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for Ring ConnectionStarlink, Ring Connection Starlink will submit a service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by Ring Connection Starlink is available at the location for which the ULM was requested, Ring Connection Starlink will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, Ring Connection Starlink will not be charged for ULM but will only be charged the service order charges for submitting an order.
Appears in 1 contract
Samples: Interconnection Agreement
Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000.
2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18,000 feet in length.
2.5.3 For any copper loop being ordered by Ring Connection Quality Telephone which has over 6,000 feet of combined bridged tap will be modified, upon request from Ring ConnectionQuality Telephone, so that the loop will have a maximum of 6,000 feet of bridged tap. This modification will be performed at no additional charge to Ring ConnectionQuality Telephone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment.
2.5.4 Ring Connection Quality Telephone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If Ring Connection Quality Telephone requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. Ring Connection Quality Telephone will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned.
2.5.8 Ring Connection Quality Telephone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that Ring Connection Quality Telephone desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for Ring ConnectionQuality Telephone, Ring Connection Quality Telephone will submit a service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by Ring Connection Quality Telephone is available at the location for which the ULM was requested, Ring Connection Quality Telephone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, Ring Connection Quality Telephone will not be charged for ULM but will only be charged the service order charges for submitting an order.
Appears in 1 contract
Samples: Clec Agreement
Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000.
2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18,000 feet in length.
2.5.3 For any copper loop being ordered by Ring Connection Metro Teleconnect which has over 6,000 feet of combined bridged tap will be modified, upon request from Ring ConnectionMetro Teleconnect, so that the loop will have a maximum of 6,000 feet of bridged tap. This modification will be performed at no additional charge to Ring ConnectionMetro Teleconnect. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment.
2.5.4 Ring Connection Metro Teleconnect may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If Ring Connection Metro Teleconnect requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. Ring Connection Metro Teleconnect will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned.
2.5.8 Ring Connection Metro Teleconnect shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that Ring Connection Metro Teleconnect desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for Ring ConnectionMetro Teleconnect, Ring Connection Metro Teleconnect will submit a service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by Ring Connection Metro Teleconnect is available at the location for which the ULM was requested, Ring Connection Metro Teleconnect will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, Ring Connection Metro Teleconnect will not be charged for ULM but will only be charged the service order charges for submitting an order.
Appears in 1 contract
Samples: Interconnection Agreement
Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop Subloop that may diminish the capability of the Loop or Sub-loop Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000BellSouth’s TR73600 Unbundled Local Loop Technical Specification.
2.5.2 BellSouth will remove load coils only on copper loops Loops and sub-loops Subloops that are less than 18,000 feet in length.
2.5.3 For any copper loop being ordered by Ring Connection South Georgia Pre-Paid which has over 6,000 six thousand (6,000) feet of combined bridged tap will be modified, upon request from Ring ConnectionSouth Georgia Pre-Paid, so that the loop will have a maximum of 6,000 six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to Ring ConnectionSouth Georgia Pre-Paid. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop Loop that will result in a combined total of bridged tap between 2,500 two thousand five hundred (2,500) and 6,000 six thousand (6,000) feet will be performed at the rates set forth in Exhibit A of this Attachment.A.
2.5.4 Ring Connection South Georgia Pre-Paid may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0 ) and 2,500 two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction SC Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.A.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If Ring Connection South Georgia Pre-Paid requests ULM on a reserved facility for a new loop Loop order, BellSouth may perform a pair change and provision a different loop Loop facility in lieu of the reserved facility with ULM if feasible. The loop Loop provisioned will meet or exceed specifications of the requested loop Loop facility as modified. Ring Connection South Georgia Pre-Paid will not be charged for ULM if a different loop Loop is provisioned. For loops Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop Loop provisioned.
2.5.8 Ring Connection South Georgia Pre-Paid shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that Ring Connection South Georgia Pre-Paid desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for Ring ConnectionSouth Georgia Pre-Paid, Ring Connection South Georgia Pre-Paid will submit a service inquiry SI to BellSouth. If a spare Loop facility that meets the loop Loop modification specifications requested by Ring Connection South Georgia Pre-Paid is available at the location for which the ULM was requested, Ring Connection South Georgia Pre-Paid will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, Ring Connection South Georgia Pre- Paid will not be charged for ULM but will only be charged the service order charges for submitting an order.
Appears in 1 contract
Samples: Interconnection Agreement
Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000.
2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18,000 feet in length.
2.5.3 For any copper loop being ordered by Ring Connection MTS Communications which has over 6,000 feet of combined bridged tap will be modified, upon request from Ring ConnectionMTS Communications, so that the loop will have a maximum of 6,000 feet of bridged tap. This modification will be performed at no additional charge to Ring ConnectionMTS Communications. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment.
2.5.4 Ring Connection MTS Communications may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If Ring Connection MTS Communications requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. Ring Connection MTS Communications will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned.
2.5.8 Ring Connection MTS Communications shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that Ring Connection MTS Communications desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for Ring ConnectionMTS Communications, Ring Connection MTS Communications will submit a service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by Ring Connection MTS Communications is available at the location for which the ULM was requested, Ring Connection MTS Communications will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, Ring Connection MTS Communications will not be charged for ULM but will only be charged the service order charges for submitting an order.
Appears in 1 contract
Samples: Interconnection Agreement
Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000.
2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18,000 feet in length.
2.5.3 For any copper loop being ordered by Ring Connection Ruddata which has over 6,000 feet of combined bridged tap will be modified, upon request from Ring ConnectionRuddata, so that the loop will have a maximum of 6,000 feet of bridged tap. This modification will be performed at no additional charge to Ring ConnectionRuddata. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment.
2.5.4 Ring Connection Ruddata may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If Ring Connection Ruddata requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. Ring Connection Ruddata will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned.
2.5.8 Ring Connection Ruddata shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that Ring Connection Ruddata desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for Ring ConnectionRuddata, Ring Connection Ruddata will submit a service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by Ring Connection Ruddata is available at the location for which the ULM was requested, Ring Connection Ruddata will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, Ring Connection Ruddata will not be charged for ULM but will only be charged the service order charges for submitting an order.
Appears in 1 contract
Samples: Interconnection Agreement
Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customersEnd Users. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000.
2.5.2 2.5.1 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18,000 feet in length.
2.5.3 2.5.2 For any copper loop being ordered by Ring Connection Globe which has over 6,000 feet of combined bridged tap will be modified, upon request from Ring ConnectionGlobe, so that the loop will have a maximum of 6,000 feet of bridged tap. This modification will be performed at no additional charge to Ring ConnectionGlobe. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment.
2.5.4 Ring Connection 2.5.3 Globe may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties.
2.5.5 2.5.4 Rates for ULM are as set forth in Exhibit A of this Attachment.
2.5.6 2.5.5 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 2.5.6 If Ring Connection Globe requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. Ring Connection Globe will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned.
2.5.8 Ring Connection 2.5.7 Globe shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that Ring Connection Globe desires BellSouth to condition.
2.5.9 2.5.8 When requesting ULM for a Loop that BellSouth has previously provisioned for Ring ConnectionGlobe, Ring Connection Globe will submit a service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by Ring Connection Globe is available at the location for which the ULM was requested, Ring Connection Globe will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, Ring Connection Globe will not be charged for ULM but will only be charged the service order charges for submitting an order.
Appears in 1 contract
Samples: Clec Agreement
Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000.
2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18,000 feet in length.
2.5.3 For any copper loop being ordered by Ring Connection Sail Telecom which has over 6,000 feet of combined bridged tap will be modified, upon request from Ring ConnectionSail Telecom, so that the loop will have a maximum of 6,000 feet of bridged tap. This modification will be performed at no additional charge to Ring ConnectionSail Telecom. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment.
2.5.4 Ring Connection Sail Telecom may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If Ring Connection Sail Telecom requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. Ring Connection Sail Telecom will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned.
2.5.8 Ring Connection Sail Telecom shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that Ring Connection Sail Telecom desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for Ring ConnectionSail Telecom, Ring Connection Sail Telecom will submit a service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by Ring Connection Sail Telecom is available at the location for which the ULM was requested, Ring Connection Sail Telecom will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, Ring Connection Sail Telecom will not be charged for ULM but will only be charged the service order charges for submitting an order.
Appears in 1 contract
Samples: Interconnection Agreement
Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop that may diminish the capability of the Loop or Sub-loop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000.
2.5.2 BellSouth will remove load coils only on copper loops and sub-loops that are less than 18,000 feet in length.
2.5.3 For any copper loop being ordered by Ring Connection Hotline which has over 6,000 feet of combined bridged tap will be modified, upon request from Ring ConnectionHotline, so that the loop will have a maximum of 6,000 feet of bridged tap. This modification will be performed at no additional charge to Ring ConnectionHotline. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop that will result in a combined total of bridged tap between 2,500 and 6,000 feet will be performed at the rates set forth in Exhibit A of this Attachment.
2.5.4 Ring Connection Hotline may request removal of any unnecessary and non-excessive bridged tap (bridged tap between 0 and 2,500 feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If Ring Connection Hotline requests ULM on a reserved facility for a new loop order, BellSouth may perform a pair change and provision a different loop facility in lieu of the reserved facility with ULM if feasible. The loop provisioned will meet or exceed specifications of the requested loop facility as modified. Ring Connection Hotline will not be charged for ULM if a different loop is provisioned. For loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop provisioned.
2.5.8 Ring Connection Hotline shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that Ring Connection Hotline desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for Ring ConnectionHotline, Ring Connection Hotline will submit a service inquiry to BellSouth. If a spare Loop facility that meets the loop modification specifications requested by Ring Connection Hotline is available at the location for which the ULM was requested, Ring Connection Hotline will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, Ring Connection Hotline will not be charged for ULM but will only be charged the service order charges for submitting an order.
Appears in 1 contract
Samples: Clec Agreement
Unbundled Loop Modifications (Line Conditioning. 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Sub-loop Subloop that may diminish the capability of the Loop or Sub-loop Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, but are not limited to, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the XxxxXxxxx XX 00000BellSouth’s TR73600 Unbundled Local Loop Technical Specification.
2.5.2 BellSouth will remove load coils only on copper loops Loops and sub-loops Subloops that are less than 18,000 feet in length.
2.5.3 For any copper loop being ordered by Ring Connection Georgia Telephone which has over 6,000 six thousand (6,000) feet of combined bridged tap will be modified, upon request from Ring ConnectionGeorgia Telephone, so that the loop will have a maximum of 6,000 six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to Ring ConnectionGeorgia Telephone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper loop Loop that will result in a combined total of bridged tap between 2,500 two thousand five hundred (2,500) and 6,000 six thousand (6,000) feet will be performed at the rates set forth in Exhibit A of this Attachment.A.
2.5.4 Ring Connection Georgia Telephone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0 ) and 2,500 two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s Special Construction SC Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A of this Attachment.A.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If Ring Connection Georgia Telephone requests ULM on a reserved facility for a new loop Loop order, BellSouth may perform a pair change and provision a different loop Loop facility in lieu of the reserved facility with ULM if feasible. The loop Loop provisioned will meet or exceed specifications of the requested loop Loop facility as modified. Ring Connection Georgia Telephone will not be charged for ULM if a different loop Loop is provisioned. For loops Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the loop Loop provisioned.
2.5.8 Ring Connection Georgia Telephone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that Ring Connection Georgia Telephone desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for Ring ConnectionGeorgia Telephone, Ring Connection Georgia Telephone will submit a service inquiry SI to BellSouth. If a spare Loop facility that meets the loop Loop modification specifications requested by Ring Connection Georgia Telephone is available at the location for which the ULM was requested, Ring Connection Georgia Telephone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, Ring Connection Georgia Telephone will not be charged for ULM but will only be charged the service order charges for submitting an order.
Appears in 1 contract
Samples: Interconnection Agreement