Uninterrupted Power Source Sample Clauses

Uninterrupted Power Source. Landlord shall be responsible for the operation, maintenance and repair of the UPS system serving Mods 7 and 10. Tenant shall reimburse Landlord within 15 days after receipt of an invoice for Landlord’s third-party costs in connection with UPS system. Notwithstanding the foregoing, if, under generally accepted accounting principles, consistently applied, any repair cannot be expensed in the year when made, Landlord shall amortize the cost of such repair over its useful life and Tenant’s reimbursement obligations in any given year shall not exceed the amount which Landlord is permitted to amortize.
AutoNDA by SimpleDocs
Uninterrupted Power Source. Pursuant to the Prime Lease, Landlord is entitled to certain space on Floor P2 of the Building (the "UPS Space") which is used for the installation and operation of Tenant's uninterrupted power source equipment (collectively, "Tenant's UPS Equipment") that supplies power to the NER and certain other portions of both the Subleased Premises and the Premises. The "Subleased Premises" includes the assignment and conveyance to Tenant during the Sublease Term of such right to use the UPS Space. Tenant owns or leases Tenant's UPS Equipment, and on the date hereof, Landlord hereby transfers and conveys to Tenant any interest that Landlord has in Tenant's UPS Equipment. Upon Tenant's request, Landlord shall execute and deliver to Tenant a quit claim or other document which Tenant may reasonably request to confirm such transfer and conveyance. Tenant shall have the exclusive right and obligation to maintain, repair, replace, and operate the UPS Space and Tenant's UPS Equipment, and Landlord shall reimburse Tenant for Landlord's Proportionate Share of the costs of doing so, all in accordance with the requirements of the Service Agreement. Landlord has installed additional UPS Equipment ("Landlord's UPS Equipment") in Landlord's NER for the purpose of supplying the computer equipment located in Landlord's NER with clean and uninterrupted power. Landlord, at Landlord's cost, will own, operate, maintain, repair, and replace Landlord's UPS Equipment.
Uninterrupted Power Source. ("ups") equipment
Uninterrupted Power Source. Tenant shall have the right to install, use and maintain an uninterrupted power source (the “UPS”) in the Premises during the Term. The installation of the UPS shall be subject to the prior approval of Landlord in accordance with Article 8 of this Lease, including, without limitation, the location of the UPS within the Premises and the manner in which the UPS will be installed. Tenant shall be responsible for the cost of all electricity consumed in connection with the operation of the UPS. Tenant agrees the UPS shall remain the property of Tenant until the expiration or earlier termination of this Lease or Tenant’s right to possession of the Premises, at which time it shall be removed by Tenant in accordance with the terms and conditions of this Lease.

Related to Uninterrupted Power Source

  • All-Requirements Power Supply The service under which the Competitive Supplier provides all of the electrical energy, capacity, reserves, and ancillary services, transmission services, transmission and distribution losses, congestion management, and other such services or products necessary to provide firm power supply to Participating Consumers at the Point of Delivery.

  • Capacity Interconnection Rights Pursuant to and subject to the applicable terms of the Tariff, the Interconnection Customer shall have Capacity Interconnection Rights at the Point(s) of Interconnection specified in this Interconnection Service Agreement in the amount of 33.6

  • Voice Grade Unbundled Copper Sub-Loop Unbundled Sub-Loop Distribution – Intrabuilding Network Cable (aka riser cable)

  • Power Tools All time spent by Employees travelling to and from distant work will be paid as if worked during the time the travel is taken.

  • Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

  • Authority and Capacity Contractor and Contractor’s signatory each warrant and represent that each has full authority and capacity to enter into this Contract.

  • Unbundled Copper Sub-Loop (UCSL) is a copper facility of any length provided from the cross-box in the field up to and including the end-user’s point of demarcation. If available, this facility will not have any intervening equipment such as load coils between the end-user and the cross-box.

  • Contract Capacity The electric power producing capability of the Generating Facility which is committed to Edison.

  • Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety

  • Organization; Power; Qualification Each of the Borrower, the other Loan Parties and the other Subsidiaries is a corporation, partnership or other legal entity, duly organized or formed, validly existing and in good standing under the jurisdiction of its incorporation or formation, has the power and authority to own or lease its respective properties and to carry on its respective business as now being and hereafter proposed to be conducted and is duly qualified and is in good standing as a foreign corporation, partnership or other legal entity, and authorized to do business, in each jurisdiction in which the character of its properties or the nature of its business requires such qualification or authorization and where the failure to be so qualified or authorized could reasonably be expected to have, in each instance, a Material Adverse Effect.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!