Bidding Process 3.1. Bidding shall generally commence based on the sequence of the lot being shown on the PAH Website. However the Auctioneer has the right to vary the sequence without having to give prior notice to the intended bidders.
3.2. It shall be the responsibilities of the E-bidders to login through PAH website to wait for the turn to bid for the property lot in which they intend to bid.
3.3. The Auctioneer has the discretion to set a new reserve price in the event that there is more than one (1) registered bidder.
3.4. The amount of incremental bid will appear on the website prior to the commencement of the auction.
3.5. Registered online Bidders shall start bidding online by pressing the BID Button using their own gadgets with internet connection. If your bid is the highest, it will be denoted by a Green Coloured Box otherwise it will be a Red Coloured Box The highest bid shall flash 10 seconds (subject to change) interval for four (4) times " Calling Once, Calling Twice, Last Call and Sold". E-bidders may submit their bid at any of these stages of biddings by pressing the BID button. The successful bidder's bid will be denoted by a green coloured screen. The highest bidder shall be declared as the successful purchaser upon the fall of the hammer.
3.6. In the event that there is no bid after forty(40) seconds from the time of commencement of the auction, the auction shall be aborted.
3.7. Any bid once entered by the registered online E-bidders shall be binding and the bid shall not be withdrawn or retracted in any manner whatsoever after the fall of the hammer.
3.8. Both the successful and unsuccessful bidders will be notified by the Auctioneer through the website and also via E-mail where further directions are given in order to conclude the sale of the auction property.
3.9. In the event of any dispute, the decision of the Auctioneer shall be final and binding on all bidders.
3.10. Unsuccessful E-bidders shall have the deposit refunded to the same bank account from which the deposit transfer was made within two (2) working days from the date of auction.
3.11. The information shown and/or prompted on the screen handled by the PAH website in regards to the auction in particular the increment of the bidding price during the bidding process and the declaration of the successful bidder shall be final and conclusive.
BIDDING PROCEDURE 1.1 Sealed bid, (formal and informal), subject to Instructions and General Conditions and any special conditions set forth herein, will be received in the office of the Purchasing Division, 440 So. 8th St., Lincoln, NE 68508, until the bid closing date and time indicated for furnishing Lancaster County, hereinafter referred to as “County”, the materials, supplies, equipment or services shown in the electronic bid request.
1.2 Bidders shall use the electronic bid system for submitting bids and must complete all required fields. If you do not care to bid, please respond to the bid request and note your reason.
1.3 Identify the item you will furnish by brand or manufacturer’s name and catalog numbers. Also furnish specifications and descriptive literature if not bidding the specific manufacturer or model as listed in the specifications.
1.4 Any person submitting a bid for a firm, corporation, or other organization must show evidence of his authority so to bind such firm, corporation, or organization.
1.5 Bids received after the time and date established for receiving bids will be rejected.
1.6 The Bidders and public are invited, but not required, to attend the formal opening of bids. At the opening, prices will be displayed electronically and/or read aloud to the public. The pricing is also available for immediate viewing on-line. No decisions related to an award of a contract or purchase order will be made at the opening.
Offering Process In connection with the Offering, each of the Co-Managers will:
a. Familiarize itself to the extent it deems appropriate with the business, operations, financial condition and prospects of the Client, including the artwork to be beneficially owned by the Client and information relating to the acquisition of the artwork by Client and its affiliates;
b. Review to its satisfaction the final offering circular filed with the United States Securities and Exchange Commission (“SEC”) pursuant to Rule 253(g) (the “Offering Circular”) and such other documents to be used by such Co-Manager (the “Offering Materials”) in connection with the offering of the Securities; and
c. Review to its satisfaction the active and planned operational practices and procedures of the Client in the conduct of the Offering and assist the Client to meet certain applicable rules and regulations promulgated by, and guidance issued by, the SEC and Financial Industry Regulatory Authority, Inc. (“FINRA”). If each of the Co-Managers is satisfied with the results of its due diligence of Client, each Co-Manager Adviser will then be authorized to:
a. Identify and contact possible high net-worth, ultra-high net-worth, and institutional investors, which might have an interest in receiving the Offering Materials and evaluating participation in the Offering;
b. Engage in conversations with potential investors that express an interest in learning more about the Offering (and similar transactions) via the Masterworks Platform and were directed to the Co-Manager by the Masterworks Platform, which is controlled by an affiliate of the Client;
c. Use the Offering Circular (and any other Offering Materials approved by the Client and such Co-Manager) for solicitation purposes, which the Client will distribute via the Masterworks Platform to each potential investor concurrently with or in advance of any oral communication by a registered representative with such potential investor;
d. Attend meetings with Client and potential investors, and assist the Client in responding to due diligence requests from potential investors;
e. Ensure to its satisfaction that Anti-Money Laundering (“AML”) procedures are implemented for all potential investors in the Offering;
f. Ensure to its satisfaction that suitability assessments are conducted for all potential investors with which such Co-Manager has any communications; and
g. Generally assist the Client in its sale of securities to those potential investors accepted by Client in the Offering.
BIDDING PROCEDURES 4.1. Bidders have to login at EHSAN AUCTIONEERS SDN. BHD. Website using the same registered email 30 minute before Auction Time.
4.2. Bidders have to click VIEW BID SCREEN BUTTON beside the status to show the bidding screen. Once enter the bidding screen bidders will be on STANDBY MODE 30 minute before the auction started.
4.3. Bidding shall generally commence based on the sequence of the lot being shown on the EHSAN AUCTIONEERS SDN. BHD. website. However, the Auctioneer has the right to vary this sequence without notice.
4.4. It shall be the responsibility of registered E-Bidders to log in through the EHSAN AUCTIONEERS SDN. BHD. website to wait for their turn to bid for the property lot in which they intend to bid.
4.5. The Auctioneer has the right to set a new reserve price in the event there is more than 1 bidder. The reference to a "bidder” here includes E-Bidders as well as on-site bidders.
4.6. Auctioneer will announce the amount of incremental bid and the same will appear on the website prior to the commencement of the auction.
4.7. “Standby mode” is displayed, followed by a message stating “AUCTION STARTED”. Enter your BID by clicking “NEXT BID” button.
4.8. Each bid will be called for 3 times, “FIRST CALLING, “SECOND CALLING”, “FINAL CALL”. Registered E-Bidders may submit their bid at any of these stages of biddings by click the bid amount.
4.9. Any bid by the registered E-bidders shall not be withdrawn once entered.
4.10. In the event of any clarification, disruption or special situation, the Auctioneer may at his discretion decide to pause, postpone and/or call off the public auction. The E-bidders will be notified of this on the BIDDING SCREEN.
4.11. When system displays “NO MORE BIDS”, no further bids will be accepted by the Auctioneer, whether on-site or through the EHSAN AUCTIONEERS SDN. BHD. website.
4.12. The bidder with the highest bid shall be declared as successful bidder upon the fall of hammer.
4.13. The decision of the Auctioneer shall be final and binding on all on-site and/or E-bidders.
4.14. A successful bidder will be directed to a page where further directions are given in order to conclude the sale of the auction property. Please also refer to Part 5 below.
4.15. Unsuccessful E-Bidders will have the deposit paid processed to be refunded to the same bank account from which the deposit transfer was made within three (3) working days.
4.16. The information shown and/or prompted on the screen handled by the EHSAN AUCTIONEERS SDN. BHD. website regarding the public auction, particularly to the calling of bidding price during the bidding process and the declaration of successful bidder shall be final and conclusive.
Ordering Process 6.4.1 CLEC, or CLEC's agent, shall act as the single point of contact for its End User Customers' service needs, including without limitation, sales, service design, order taking, Provisioning, change orders, training, maintenance, trouble reports, repair, post-sale servicing, Billing, collection and inquiry. CLEC's End User Customers contacting Qwest in error will be instructed to contact CLEC; and Qwest's End User Customers contacting CLEC in error will be instructed to contact Qwest. In responding to calls, neither Party shall make disparaging remarks about each other. To the extent the correct provider can be determined, misdirected calls received by either Party will be referred to the proper provider of local Exchange Service; however, nothing in this Agreement shall be deemed to prohibit Qwest or CLEC from discussing its products and services with CLEC's or Qwest's End User Customers who call the other Party seeking such information.
6.4.2 CLEC shall transmit to Qwest all information necessary for the ordering (Billing, Directory Listing and other information), installation, repair, maintenance and post-installation servicing according to Qwest's standard procedures, as described in the Qwest Product Catalog (PCAT) available on Qwest's public web site located at xxxx://xxx.xxxxx.xxx/wholesale/pcat. Information shall be provided using Qwest's designated Local Service Request (LSR) format which may include the LSR, End User Customer and resale forms.
6.4.3 Qwest will use the same performance standards and criteria for installation, Provisioning, maintenance, and repair of services provided to CLEC for resale under this Agreement as Qwest provides to itself, its Affiliates, its subsidiaries, other Resellers, and Qwest retail End User Customers. The installation, Provisioning, maintenance, and repair processes for CLEC's resale service requests are detailed in the Access to OSS Section of this Agreement, and are applicable whether CLEC's resale service requests are submitted via Operational Support System or by facsimile.
6.4.4 CLEC is responsible for providing to Qwest complete and accurate End User Customer Directory Listing information including initial and updated information for Directory Assistance Service, white pages directories, and E911/911 Emergency Services. The Ancillary Services Section of this Agreement contains complete terms and conditions for Directory Listings for Directory Assistance Services, white pages directories, and E911/911 Emergency Services.
6.4.5 If Qwest's retail End User Customer, or the End User Customer's New Service Provider orders the discontinuance of the End User Customer's existing Qwest service in anticipation of the End User Customer moving to a New Service Provider, Qwest will render its closing xxxx to the End User Customer, discontinuing Billing as of the date of the discontinuance of Qwest's service to the End User Customer. If the Current Service Provider, or if the End User Customer's New Service Provider orders the discontinuance of existing resold service from the Current Service Provider, Qwest will xxxx the Current Service Provider for service through the date the End User Customer receives resold service from the Current Service Provider. Qwest will notify CLEC by Operational Support System interface, facsimile, or by other agreed-upon processes when an End User Customer moves from the Current Service Provider to a New Service Provider. Qwest will not provide the Current Service Provider with the name of the New Service Provider selected by the End User Customer.
6.4.6 CLEC shall provide Qwest and Qwest shall provide CLEC with points of contact for order entry, problem resolution and repair of the resold services. These points of contact will be identified for both CLEC and Qwest in the event special attention is required on a service request.
6.4.7 Prior to placing orders on behalf of the End User Customer, CLEC shall be responsible for obtaining and having in its possession Proof of Authorization (POA), as set forth in the POA Section of this Agreement.
6.4.8 Due Date intervals for CLEC's resale service requests are established when service requests are received by Qwest through Operational Support Systems or by facsimile. Intervals provided to CLEC shall be equivalent to intervals provided by Qwest to itself, its Affiliates, its subsidiaries, other Resellers, and to Qwest's retail End User Customers.
Bidding Phase 2.8.1 The Professional, following the Owner's approval of the Construction Document Phase, shall assist the Owner in obtaining bids and in award and preparation of Construction Contracts.
2.8.2 The Professional shall attend the bid opening and furnish a suitably detailed tabulation sheet for recording the name of each Bidder, the Bidder's Certificate of Responsibility Number, Bid Security, Base Bid, Alternates, and remarks. The Professional shall furnish sufficient tabulation sheets for all in attendance. Immediately after receipt of bids, the Professional shall submit to the Owner a certified tabulation of all bids received, along with his recommendation as to Contract award.
2.8.3 The Professional, following the award of a Construction Contract, shall prepare and submit to the Owner, two (2) copies of updated Construction Documents (Plans/Specifications). Each copy shall be marked OFFICIAL CONTRACT DOCUMENTS and shall include an executed bid Proposal Form, Agreement Form, Contract Bond, Power of Attorney, Certificate of Insurance, all bulletins, Addenda, and supplemental Drawings. One (1) copy shall be retained by the Owner, one (1) copy shall be for the Contractor. Any other contract document guidelines will be distributed to the Professional at the bid opening.
2.8.4 The Professional shall also furnish the area and volume of the building computed in accordance with criteria of the American Institute of Architects; and the square foot and cubic foot costs of only the building, the mechanical system, the electrical system, special built-in equipment, and the total Project cost.
2.8.5 The Professional shall, unless waived by the Owner, also submit one electronic format copy of the updated Contract Documents (plans and specifications) in coordination with said Contract Documents in 2.8.3 above. Said electronic submittal to be submitted within thirty (30) days after award by Owner in .pdf format. The actual cost of the electronic submittal shall be paid by the Owner, with cost approval by the Owner before printing is ordered in accordance with 3.4.
ORDERING PROCEDURE Orders placed against this contract may be in the form of an agency issued purchase order on an as-required basis. Or an agency may also use the Arkansas State Purchasing Card (P- Card) to purchase furniture.
Closing Procedure The Company or its assigns shall effect the ----------------- Repurchase by delivering or mailing to the Grantee (and/or, if applicable, his Permitted Transferees) written notice within six (6) months after the Termination Event or Bankruptcy, specifying a date within such six-month period in which the Repurchase shall be effected. Upon such notification, the Grantee and his Permitted Transferees shall promptly surrender to the Company any certificates representing the Restricted Shares being purchased, together with a duly executed stock power for the transfer of such Restricted Shares to the Company or the Company's assignee or assignees (as contemplated by Section 6, if applicable). Upon the Company's or its assignee's receipt of the certificates from the Grantee or his Permitted Transferees, the Company or its assignee or assignees shall deliver to him, her or them a check for the purchase price of the Restricted Shares being purchased, provided, however, that the Company may pay the purchase price for such shares by offsetting and canceling any indebtedness then owed by the Grantee to the Company. At such time, the Grantee and/or any holder of the Restricted Shares shall deliver to the Company the certificate or certificates representing the Restricted Shares so repurchased, duly endorsed for transfer, free and clear of any liens or encumbrances. The Repurchase obligation specified herein shall survive and remain in effect as to Restricted Shares following and notwithstanding any public offering by or merger or other transaction involving the Company and certificates representing such Restricted Shares shall bear legends to such effect.
Closing Procedures Subject to satisfaction or waiver by the relevant Party of the conditions of Closing, on the Closing Date, the Sellers shall deliver actual possession of the Purchased Interest to the Purchaser and upon such delivery the Purchaser shall pay and issue the Purchase Price in accordance with Section 2.3.
HIRING PROCEDURE 5.1 At the Pre-job Conference the Employer may request and the Local Union shall clear:
5.1.1 Up to ten percent (10%) of the Principal Operators excluding mechanics, required for the job from other Locals of the Union and each such Principal Operator shall be entitled to perform only the work for which he is cleared. Up to one- half (½) of those Principal Operators cleared under this provision may commence employment at the start of the Right-of-Way operations and the balance of those Principal Operators cleared under this provision may commence employment not prior to the start of the Pipe Gang operations.
5.1.2 Up to fifty percent (50%) of the mechanics, utility welders and lubrication and service unit operators required for the job who are members of another Local of the Union. This ratio shall be maintained on a "one-to-one" basis for the duration of the job. The first employee shall be a member of the Local Union having geographic jurisdiction for the job.
5.1.3 The Employer shall have the right to name request by classification up to fifty percent (50%) of the required employees who are members of the Local Union. Those employees hired under the provisions of Article 5.1.1 and 5.1.2 above shall be included in the fifty percent (50%). This ratio shall be maintained on a one-to-one basis for the duration of the job. Thereafter the Employer shall notify the Local Union of all his employee requirements and shall only hire those who have been cleared for work by the Local Union having jurisdiction.
5.2 The Local Union shall be given forty-eight (48) hours exclusive of Saturdays, Sundays, and holidays to supply the required employees but shall advise the Employer of expected delays in dispatching any employees within forty- eight (48) hours. Employees shall be entitled to Waiting Time or Reporting Time upon arrival at the jobsite on the day designated by the Employer for arrival, if no work is provided.
5.3 All employees shall be in possession of a referral slip from the Local Union for identification purposes unless the Local Union otherwise clears an employee for hire by telegram, telex, facsimile transmission or other means of written communication. All out-of-province employees must provide the Local Union having jurisdiction with a copy of a duly authorized Travel Card issued by his/her home Local prior to being issued a referral slip and cleared to work.
5.4 Subject to the terms and conditions of this Agreement, the Employer shall have the right to refuse any referral provided the cause for such refusal is stated and shall not be unreasonable.
5.5 If the Local Union is unable to supply the required employees in accordance with Article 5.2, the Employer may obtain employees elsewhere, subject to the provisions of Article 3.3.
5.6 In the event the Local Union is unable to supply the required qualified employees, the Employer will provide every opportunity to any employee who has successfully completed a pipeline Operating Engineers training course, and is approved by a joint training committee, and the employee will be admitted to membership in the Local Union in accordance with Article
