Formation and Composition The Parties to this agreement will maintain a Joint Administration and Dispute Resolution Committee (JADRC) consisting of five (5) representatives of the employers and five (5) representatives of the Provincial Bargaining Council.
RE-WEIGHING PRODUCT Deliveries are subject to re- weighing at the point of destination by the Authorized User. If shrinkage occurs which exceeds that normally allowable in the trade, the Authorized User shall have the option to require delivery of the difference in quantity or to reduce the payment accordingly. Such option shall be exercised in writing by the Authorized User.
Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.
API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.
Random Drug Testing All employees covered by this Agreement shall be subject to random drug testing in accordance with Appendix D.
Samples The Contractor shall submit the following samples of Materials and relevant information to the Authority’s Engineer for pre-construction review:
(a) manufacturer's test reports and standard samples of manufactured Materials; and
(b) samples of such other Materials as the Authority’s Engineer may require.
SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 4.12.1 Shop Drawings are drawings, diagrams, schedules and other, data specially prepared for the Work by the Contractor or any Subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work.
4.12.2 Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate a material, product or system for some portion of the Work.
4.12.3 Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged.
4.12.4 The Contractor shall review, approve and submit, with reasonable promptness and in such sequence as to cause no delay in the Work or in the work of the State or any separate contractor, all Shop Drawings, Product Data and Samples required by the Contract Documents.
4.12.5 By approving and submitting Shop Drawings, Product Data and Samples, the Contractor represents that he / she has determined and verified all materials, field measurements, and field construction criteria related thereto, or will do so, and that he / she has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents.
4.12.6 The Contractor shall not be relieved of responsibility for any deviation from the requirements of the Contract Documents by the Architect's approval of Shop Drawings, Product Data or Samples under Subparagraph 2.2.7 of these General Conditions unless the Contractor has specifically informed the Architect and the State in writing of such deviation at the time of sub- mission and the Architect and the State has given written approval to the specific deviation. The Contractor shall not be relieved from responsibility for errors or omissions in the Shop Drawings, Product Data or Samples by the Architect's approval thereof.
4.12.7 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data or Samples, to revisions other than those requested by the Architect on previous submittals.
4.12.8 No portion of the Work requiring submission of a Shop Drawing, Product Data or Sample shall be commenced until the submittal has been approved by the Architect as provided in Subparagraph 2.2.7 of these General Conditions. All such portions of the Work shall be in accordance with approved submittals.
Asbestos Any material that contains more than one percent asbestos and is friable or is releasing asbestos fibers into the air above current action levels established by the United States Occupational Safety and Health Administration.
Board Composition (a) On the date of this Agreement, the Company shall cause the Person(s), if any, listed on Schedule B to be designated as Minority Shareholder Observers (as defined below) with all rights set forth in Section 2.1(d) (it being understood that at any time after the date hereof until the date that the Minority Shareholder Observer(s) are appointed to the Board as directors pursuant to the immediately following sentence, the Company shall, promptly upon receipt of a written request from the Minority Shareholder Representative, cause any Person(s) named in such written request to be designated as Minority Shareholder Observer(s); provided, that there may be no more than two Minority Shareholder Observers at any one time). As soon as reasonably practicable following receipt of the Company Shareholder Approval and in any case within one Business Day thereafter, the Board shall increase the size of the Board by two directors and cause such persons to be appointed to the Board as directors; provided, that if the Company Shareholder Approval is not obtained by the date that is 30 days prior to the Designation Date for the Next Annual Meeting, (i) the Company shall take all commercially reasonable actions necessary to cause the election of two Minority Shareholder Observers to the Board as directors at the Next Annual Meeting or (ii) if the Minority Shareholders no longer beneficially own, in the aggregate, 66% or more of the Minority Shares, the Company shall take all commercially reasonable actions necessary to cause the election of one Minority Shareholder Observer, designated by the Minority Shareholder Representative on behalf of the Minority Shareholders, to be elected to the Board as director at the Next Annual Meeting; in each case, the Company’s obligations to take all commercially reasonable actions necessary to cause the election of such Minority Shareholder Observers to the Board as directors shall include the obligation of the Company to take all actions to cause such Minority Shareholder Observers to be nominated by the Board, including the Governance Committee, for election at the Next Annual Meeting. Thereafter, and for so long as (i) the Minority Shareholders continue to beneficially own, in the aggregate, 66% or more of the Minority Shares (the “Two Designee Threshold”), the Minority Shareholder Representative on behalf of the Minority Shareholders shall have the right to designate two directors for election to the Board and (ii)(x) the Minority Shareholders continue to beneficially own, in the aggregate, 10% or more of the then outstanding Equity Securities, or (y) the Minority Shareholders beneficially own, in the aggregate, less than 10% of the then outstanding Equity Securities but such Minority Shareholders continue to beneficially own, in the aggregate, 33% or more of the Minority Shares (“One Designee Threshold”), then the Minority Shareholder Representative on behalf of the Minority Shareholders shall have the right to designate one director for election to the Board (each such director nominee, including such initial nominees, a “Minority Shareholder Designee”), such percentages in each case calculated on a fully diluted basis giving effect to any securities, warrants, options or other rights convertible into or exchangeable or exercisable for equity securities of the Company, whether or not subject to contingencies or passage of time, or both; provided, that, if the Minority Shareholders’ beneficial ownership, in the aggregate, of Equity Securities (x) falls below the Two Designee Threshold, then one Minority Shareholder Designee, designated by the Minority Shareholder Representative on behalf of the Minority Shareholders, shall resign from the Board as promptly as practicable upon the Minority Shareholder Representative becoming aware of the Minority Shareholders falling below such threshold, or (y) falls below the One Designee Threshold, then the Minority Shareholder Designee shall resign from the Board as promptly as practicable upon the Minority Shareholder Representative becoming aware of the Minority Shareholders falling below such threshold. So long as the Minority Shareholder Representative, on behalf of the Minority Shareholders, has the right to designate at least one director for election to the Board, one Minority Shareholder Designee designated by the Minority Shareholder Representative on behalf of the Minority Shareholders shall be entitled to serve on each committee of the Board except as prohibited by applicable law or stock exchange requirements; provided, that if such Minority Shareholder Designee is so prohibited, such Minority Shareholder Designee shall nonetheless have the right to participate as a non-voting observer on such committee (any such observer, a “Committee Observer”). In each case, the Company shall take all commercially reasonable actions necessary to cause the appointment of such Minority Shareholder Designee(s) (x) to the Board (including taking all actions to cause such Minority Shareholder Designee(s) to be nominated by the Board, including the Governance Committee, for election at each annual meeting of the shareholders of Company (or at any special shareholder meeting of the Company at which the Board is to be elected)) and (y) to the applicable committee of the Board (including taking all actions to cause such Minority Shareholder Designee(s) to be elected by the Board to serve on such committee of the Board).
(b) Each Minority Shareholder Designee shall comply in all respects with the Company’s corporate governance guidelines as in effect from time to time, in each case as determined by the Board’s Corporate Governance and Nominating Committee (the “Governance Committee”); provided, that the Company hereby acknowledges and agrees that the initial Minority Shareholder Designees comply with such corporate governance guidelines. The Minority Shareholder Representative shall notify the Company of any proposed Minority Shareholder Designee in writing no later than the latest date on which shareholders of the Company may make nominations to the Board in accordance with the Code of Regulations (such date, the “Designation Date”), together with all information concerning such nominee required to be delivered to the Company by the Code of Regulations and such other information reasonably requested by the Company; provided, that the Company shall give the Shareholder Representative 30 days written notice of the Designation Date; provided, further, that that in the event the Minority Shareholder Representative fails to provide any such notice, the Minority Shareholder Designees shall be the person(s) then serving as the Minority Shareholder Designees as long as the Minority Shareholder Representative provides such information to the Company promptly upon request by the Company.
(c) In the event of the death, disability, resignation or removal of a Minority Shareholder Designee, the Board will promptly elect to the Board a replacement director designated by the Minority Shareholder Representative, subject to the fulfillment of the requirements set forth in first sentence of Section 2.1(b), to fill the resulting vacancy, and such individual shall then be deemed a Minority Shareholder Designee for all purposes under this Agreement. In the event the Minority Shareholder Representative fails to designate a replacement director to fill any such vacancy, such Board seat shall remain vacant until the Minority Shareholder Representative designates such replacement director to fill such vacancy.
(d) So long as the Minority Shareholder Representative on behalf of the Minority Shareholders has the right to designate any Minority Shareholder Designee for election to the Board pursuant to Section 2.1(b), the Minority Shareholder Representative on behalf of the Minority Shareholders shall have the right to designate a non-voting observer to the Board in lieu of, or as a replacement for, any Minority Shareholder Designee (any such observer, a “Minority Shareholder Observer”). Each Minority Shareholder Observer shall be entitled to (x) attend all meetings of the Board and each applicable committee of the Board except as prohibited by applicable law or stock exchange requirements and (y) receive all materials with respect to such meetings. The Minority Shareholder Representative on behalf of the Minority Shareholders shall have the right to remove or replace any Minority Shareholder Observer at any time from time to time, subject to compliance with the first sentence of Section 2.1(b). The Company shall (x) notify each Minority Shareholder Observer of all meetings of the Board (and the applicable committees thereof) using the same form of communication used to notify the directors on the Board and (y) provide each Minority Shareholder Observer with copies of all notices, minutes, consents and other materials provided to the directors on the Board no later than the time that such materials are provided to the directors. Each Minority Shareholder Observer shall be entitled to reimbursement for reasonable out-of-pocket expenses incurred in attending meetings of the Board (and the applicable committees thereof) to the same extent as directors on the Board.
(e) If a Committee Observer is designated pursuant to Section 2.1(a), such Committee Observer shall be entitled to (x) attend all meetings of each committee of the Board except as prohibited by applicable law or stock exchange requirements and (y) receive all materials with respect to such meetings. The Company shall (x) notify each Committee Observer of all meetings of the committees of the Board using the same form of communication used to notify the members of such committee and (y) provide each Committee Observer with copies of all notices, minutes, consents and other materials provided to the members of such committee no later than the time that such materials are provided to the members. Each Committee Observer shall be entitled to reimbursement for reasonable out-of-pocket expenses incurred in attending meetings of the committees of the Board to the same extent as members of such committees.
Study An application for leave of absence for professional study must be supported by a written statement indicating what study or research is to be undertaken, or, if applicable, what subjects are to be studied and at what institutions.
