Withholding process Sample Clauses

Withholding process. The FHWA or the contracting agency may, upon its own action, or must, upon written request of an authorized representative of the Department of Labor, withhold or cause to be withheld from the contractor so much of the accrued payments or advances as may be considered necessary to satisfy the liabilities of the prime contractor or any subcontractor for any unpaid wages; monetary relief, including interest; and liquidated damages required by the clauses set forth in this section on this contract, any other Federal contract with the same prime contractor, or any other federally assisted contract subject to the Contract Work Hours and Safety Standards Act that is held by the same prime contractor (as defined in § 5.2). The necessary funds may be withheld from the contractor under this contract, any other Federal contract with the same prime contractor, or any other federally assisted contract that is subject to the Contract Work Hours and Safety Standards Act and is held by the same prime contractor, regardless of whether the other contract was awarded or assisted by the same agency, and such funds may be used to satisfy the contractor liability for which the funds were withheld.
View SourceView Similar (106)
Withholding process. The Town of Los Gatos may, upon its own action, or must, upon written request of an authorized representative of the Department of Labor, withhold or cause to be withheld from the contractor so much of the accrued payments or advances as may be considered necessary to satisfy the liabilities of the prime contractor or any subcontractor for any unpaid wages; monetary relief, including interest; and liquidated damages required by the clauses set forth in this section 5.6(2) on this contract, any other Federal contract with the same prime contractor, or any other federally assisted contract subject to the Contract Work Hours and Safety Standards Act that is held by the same prime contractor (as defined in § 5.2). The necessary funds may be withheld from the contractor under this contract, any other Federal contract with the same prime contractor, or any other federally assisted contract that is subject to the Contract Work Hours and Safety Standards Act and is held by the same prime contractor, regardless of whether the other contract was awarded or assisted by the same agency, and such funds may be used to satisfy the contractor liability for which the funds were withheld.
View Source
Withholding process. The FHWA or the contracting agency may, upon its own action, or must, upon written request of an authorized representative of the Department of Labor, withhold or cause to be withheld from the contractor so much of the accrued payments or advances as may be considered necessary to satisfy the liabilities of the prime contractor or any subcontractor for any unpaid wages; monetary relief, including interest; and liquidated damages required by the clauses set forth in this section on this contract, any other Federal contract with the same prime contractor, or any other federally assisted contract subject to the Contract Work Hours and Safety Standards Act that is held necessary funds may be withheld from the contractor under this contract, any other Federal contract with the same prime contractor, or any other federally assisted contract that is subject to the Contract Work Hours and Safety Standards Act and is held by the same prime contractor, regardless of whether the other contract was awarded or assisted by the same agency, and such funds may be used to satisfy the contractor liability for which the funds were withheld.
View Source
Withholding process. The Environmental Protection Agency may, upon its own action, or must, upon written request of an authorized representative of the Department of Labor, withhold or cause to be withheld from the contractor so much of the accrued payments or advances as may be considered necessary to satisfy the liabilities of the prime contractor or any subcontractor for any unpaid wages; monetary relief, including interest; and liquidated damages required by the clauses set forth in this paragraph (b) on this contract, any other Federal contract with the same prime contractor, or any other federally assisted contract subject to the Contract Work Hours and Safety Standards Act that is held by the same prime contractor (as defined in § 5.2). The necessary funds may be withheld from the contractor under this contract, any other Federal contract with the same prime contractor, or any other federally assisted contract that is subject to the Contract Work Hours and Safety Standards Act and is held by the same prime contractor, regardless of whether the other contract was awarded or assisted by the same agency, and such funds may be used to satisfy the contractor liability for which the funds were withheld.
View Source
Withholding process. The U.S Department of Housing and Urban Development or the recipient of Federal assistance may, upon its own action, or must, upon written request of an authorized representative of the Department of Labor, withhold or cause to be withheld from the contractor so much of the accrued payments or advances as may be considered necessary to satisfy the liabilities of the prime contractor or any subcontractor for any unpaid wages; monetary relief, including interest; and liquidated damages required by the clauses set forth in 29 CFR 5.5(b) on this contract, any other Federal contract with the same prime contractor, or any other federally assisted contract subject to the Contract Work Hours and Safety Standards Act that is held by the same prime contractor (as defined in 29 CFR 5.
View Source
Withholding process. The City may, upon its own action, or must, upon written request of an authorized representative of the Department of Labor, withhold or cause to be withheld from the contractor so much of the accrued payments or advances as may be considered necessary to satisfy the liabilities of the prime contractor or any subcontractor for any unpaid wages; monetary relief, including interest; and liquidated damages required by the clauses set forth in this Section 18 on this contract, any other federal contract with the same prime contractor, or any other federally assisted contract subject to the Contract Work Hours and Safety Standards Act that is held by the same prime contractor (as defined in 29 CFR § 5.
View Source

Related to Withholding process

  • Bidding Process 3.1. Bidding shall generally commence based on the sequence of the lot being shown on the PAH Website. However the Auctioneer has the right to vary the sequence without having to give prior notice to the intended bidders. 3.2. It shall be the responsibilities of the E-bidders to login through PAH website to wait for the turn to bid for the property lot in which they intend to bid. 3.3. The Auctioneer has the discretion to set a new reserve price in the event that there is more than one (1) registered bidder. 3.4. The amount of incremental bid will appear on the website prior to the commencement of the auction. 3.5. Registered online Bidders shall start bidding online by pressing the BID Button using their own gadgets with internet connection. If your bid is the highest, it will be denoted by a Green Coloured Box otherwise it will be a Red Coloured Box The highest bid shall flash 10 seconds (subject to change) interval for four (4) times " Calling Once, Calling Twice, Last Call and Sold". E-bidders may submit their bid at any of these stages of biddings by pressing the BID button. The successful bidder's bid will be denoted by a green coloured screen. The highest bidder shall be declared as the successful purchaser upon the fall of the hammer. 3.6. In the event that there is no bid after forty(40) seconds from the time of commencement of the auction, the auction shall be aborted. 3.7. Any bid once entered by the registered online E-bidders shall be binding and the bid shall not be withdrawn or retracted in any manner whatsoever after the fall of the hammer. 3.8. Both the successful and unsuccessful bidders will be notified by the Auctioneer through the website and also via E-mail where further directions are given in order to conclude the sale of the auction property. 3.9. In the event of any dispute, the decision of the Auctioneer shall be final and binding on all bidders. 3.10. Unsuccessful E-bidders shall have the deposit refunded to the same bank account from which the deposit transfer was made within two (2) working days from the date of auction. 3.11. The information shown and/or prompted on the screen handled by the PAH website in regards to the auction in particular the increment of the bidding price during the bidding process and the declaration of the successful bidder shall be final and conclusive.

  • Ordering Process 6.4.1 CLEC, or CLEC's agent, shall act as the single point of contact for its End User Customers' service needs, including without limitation, sales, service design, order taking, Provisioning, change orders, training, maintenance, trouble reports, repair, post-sale servicing, Billing, collection and inquiry. CLEC's End User Customers contacting Qwest in error will be instructed to contact CLEC; and Qwest's End User Customers contacting CLEC in error will be instructed to contact Qwest. In responding to calls, neither Party shall make disparaging remarks about each other. To the extent the correct provider can be determined, misdirected calls received by either Party will be referred to the proper provider of local Exchange Service; however, nothing in this Agreement shall be deemed to prohibit Qwest or CLEC from discussing its products and services with CLEC's or Qwest's End User Customers who call the other Party seeking such information. 6.4.2 CLEC shall transmit to Qwest all information necessary for the ordering (Billing, Directory Listing and other information), installation, repair, maintenance and post-installation servicing according to Qwest's standard procedures, as described in the Qwest Product Catalog (PCAT) available on Qwest's public web site located at ▇▇▇▇://▇▇▇.▇▇▇▇▇.▇▇▇/wholesale/pcat. Information shall be provided using Qwest's designated Local Service Request (LSR) format which may include the LSR, End User Customer and resale forms. 6.4.3 Qwest will use the same performance standards and criteria for installation, Provisioning, maintenance, and repair of services provided to CLEC for resale under this Agreement as Qwest provides to itself, its Affiliates, its subsidiaries, other Resellers, and Qwest retail End User Customers. The installation, Provisioning, maintenance, and repair processes for CLEC's resale service requests are detailed in the Access to OSS Section of this Agreement, and are applicable whether CLEC's resale service requests are submitted via Operational Support System or by facsimile. 6.4.4 CLEC is responsible for providing to Qwest complete and accurate End User Customer Directory Listing information including initial and updated information for Directory Assistance Service, white pages directories, and E911/911 Emergency Services. The Ancillary Services Section of this Agreement contains complete terms and conditions for Directory Listings for Directory Assistance Services, white pages directories, and E911/911 Emergency Services. 6.4.5 If Qwest's retail End User Customer, or the End User Customer's New Service Provider orders the discontinuance of the End User Customer's existing Qwest service in anticipation of the End User Customer moving to a New Service Provider, Qwest will render its closing ▇▇▇▇ to the End User Customer, discontinuing Billing as of the date of the discontinuance of Qwest's service to the End User Customer. If the Current Service Provider, or if the End User Customer's New Service Provider orders the discontinuance of existing resold service from the Current Service Provider, Qwest will ▇▇▇▇ the Current Service Provider for service through the date the End User Customer receives resold service from the Current Service Provider. Qwest will notify CLEC by Operational Support System interface, facsimile, or by other agreed-upon processes when an End User Customer moves from the Current Service Provider to a New Service Provider. Qwest will not provide the Current Service Provider with the name of the New Service Provider selected by the End User Customer. 6.4.6 CLEC shall provide Qwest and Qwest shall provide CLEC with points of contact for order entry, problem resolution and repair of the resold services. These points of contact will be identified for both CLEC and Qwest in the event special attention is required on a service request. 6.4.7 Prior to placing orders on behalf of the End User Customer, CLEC shall be responsible for obtaining and having in its possession Proof of Authorization (POA), as set forth in the POA Section of this Agreement. 6.4.8 Due Date intervals for CLEC's resale service requests are established when service requests are received by Qwest through Operational Support Systems or by facsimile. Intervals provided to CLEC shall be equivalent to intervals provided by Qwest to itself, its Affiliates, its subsidiaries, other Resellers, and to Qwest's retail End User Customers.

  • Testing Procedures 1. Drug and alcohol testing shall be conducted in a manner designed to protect employees, protect the integrity of the testing process, safeguard the validity of test results, and ensure that those results are attributed to the correct employee. 2. Employees who are required to undergo a drug and/or alcohol test will be provided transportation to the collection facility and shall also be offered transportation home by a Department representative. 3. Employees may have a Guild representative present at the collection facility. However, the lack of Guild representation shall not unreasonably delay the collection process. 4. Employees required to undergo a drug and/or alcohol test shall cooperate fully in the collection process and complete all required forms and documents. These forms include, but are not limited to, a Consent/Release form and an Interview form. 5. Urine samples for drug testing shall be collected at a collection site designated by the Employer using the split sample collection method. The split sample is made available if retesting becomes necessary. Any specimen that tests positive for drugs shall be retained in long-term frozen storage by the laboratory conducting the analysis for a minimum of one year. 6. If medical personnel at the collection site have reason to believe that an adulterated or substituted sample has been provided (or that the employee- altered or substituted the sample), the employee will be required to immediately submit a second sample (or the original sample). This collection shall be under the direct observation of a same gender collection site staff person. The employee will be required to provide the additional or original sample during an observed collection prior to leaving the collection site. 7. An appropriate chain of custody procedure shall be followed in the administration of all drug tests. Urine samples shall be sealed and initialed by the employee and a witness. 8. Urine samples shall be promptly sent to and tested by a laboratory that is certified to perform drug tests by the Department of Health and Human Services (DHHS). Initial drug screening shall be conducted using an accepted immunoassay method. All positive tests shall be confirmed using the gas chromatography/mass spectrometry (GC/MS) drug testing method. The laboratory shall test for only the substances and within the limits as follows for the initial and confirmation tests, as provided within NIDA standards, unless this section is modified by amended agreements provided for in Section L.3.: Alcohol * Marijuana metabolites 50 ng/ml Cocaine metabolites 300 ng/ml Opiate metabolites (morphine and codeine) 300 ng/ml Phencyclidine 25 ng/ml Amphetamines (Amphetamine and Methamphetamine) 1000 ng/ml Barbituates 300 ng/ml Benzodiazepines 300 ng/ml Methadone 300 ng/ml Methaqualone 300 ng/ml Propoxyphene 300 ng/▇▇ ▇. If immunoassay is specific for free morphine the initial test level is 25 ng/ml. Alcohol * Marijuana metabolites 15 ng/ml Cocaine metabolites 150 ng/ml Opiate metabolites (morphine and codeine) 300 ng/ml Phencyclidine 25 ng/ml Amphetamines (Amphetamine and 9. Alcohol shall be tested by means of a Breathalyzer machine currently in use (B.A.C.) or future equipment which may supercede the B.A.C. machine (but excludes the P.B.T. device.) Breathalyzer alcohol tests shall be conducted at a site designated by the Employer. The testing shall follow the protocols established for criminal investigations, including the requirement of two breath samples within the proper variance. If the initial test indicates an alcohol concentration of .02 or greater, a second test shall be performed to confirm the results of the initial test at the election of the employee. The confirmatory test shall be by means of a blood draw. The confirmatory test shall also use a .02 blood alcohol concentration level to measure a positive test. If the Employee refuses to take the second confirmatory test, the first test will be used to determine alcohol concentration. The use of a BAC does not preclude the use of a blood draw for the initial testing. Whether a BAC and/or a blood draw is used depends on the circumstances leading the Employer to the conclusion that there needs to be a test. *The Sheriff’s position is that with regard to the cut off level for a positive alcohol test result it is .02 or greater based on his belief that law enforcement should be a no tolerance environment and the presence of any alcohol should be prohibited for safety reasons and to set an example within the jurisdiction of this Sheriff.

  • Bumping Procedure In the application of this Article, permanent part-time employees cannot displace permanent full-time employees or vice versa provided that permanent full-time employees who have exhausted their bumping rights hereunder and are to be laid off from work shall have the right to displace a permanent part-time employee with lesser GO seniority, within their section. Such bumping within the section may only be in a downward or lateral direction provided they are qualified, willing and able to do the work (refer to Schedule “E-I” and “E-I OFPT”). Downward shall be defined as lesser pay per hour and/or lesser hours per week (permanent full-time vs. permanent part-time). Lateral shall be defined as same pay per hour. In the application of this Article, permanent part-time employees cannot displace permanent full-time employees or vice versa provided that permanent full-time employees who have exhausted their bumping rights hereunder and are to be laid off from work, shall have the right to displace any permanent part-time employee with lesser GO Transit seniority, within their section provided they are able, willing and qualified. Due to the nature of the bumping procedure and the unpredictability of the direction and results of that bumping, the layoff must take precedent over all other normal movement of employees (i.e., standing applications). During layoffs an employee may choose to accept an open position for which he/she is qualified rather than bumping within their classification or section and should he/she elect this option, they shall retain recall rights to the original classification without loss of seniority. Where an OFPT employee who has been notified or is on layoff and currently possesses the qualifications and skills of a position they have held previously, then the employee may bump laterally or downward within their section or another section where the previously held position is identified. At the time of layoff the employee must satisfy the criteria identified in the current job description, and the employee must have satisfied the performance standards of that classification. Should the parties agree that the bumping procedure will likely cause significant movement within a classification or section, then the parties may agree to have a “master” sign-up take place which will be the sole responsibility of the Union to administer.