Working Conditions of Lecturers Sample Clauses

Working Conditions of Lecturers. (a) The good employer provisions of the Xxxxx Xxxxxx Xxx 0000, sections 77 (a) and (d) or any amendment or Act passed in substitution of this Act shall apply with particular regard to good and safe working conditions and opportunities for the enhancement of the abilities of individual lecturers. (b) The provisions of the Health and Safety in Employment Xxx 0000 or any amendment or Act passed in substitution for this Act shall apply insofar as they relate to the working conditions of lecturers.
AutoNDA by SimpleDocs

Related to Working Conditions of Lecturers

  • WORKING CONDITIONS 9.01 Lunch periods shall be at mid-shift. 9.02 The Employer shall allow each employee two (2) breaks of ten (10) minutes each, but not more in a work shift. Time of breaks shall be mutually agreed upon. 9.03 Essential protective clothing including welder’s gloves, protective vests or leather jackets, noise abatement devices, and rainwear shall be supplied at no charge to the employee. In the event that an employee does not return the foregoing items supplied to him by the Employer, the Employer shall charge the cost of same to the employee and deduct this cost from any money owing to the employee. 9.04 Chemical or flush toilets shall be provided from the commencement of work on all jobs. Where the sewer or chemical toilets are not available, sanitary toilet facilities shall be provided as called for in local sanitary regulations. Toilet houses shall be painted, at least on the inside, and cleaned out daily. Toilet paper will be provided. 9.05 Where there is no running tap water available, drinking water in approved sanitary containers shall be provided. Paper cups will be supplied. Salt tablets shall be supplied during the summer months. 9.06 If requested by the Union or employee, the Employer will provide within three (3) calendar days, a termination slip which shall state the reason for the employee’s termination and whether or not he is eligible for rehire. 9.07 Adequate time will be allowed prior to quitting time for picking up tools. 9.08 A lock-up shall be provided for employees for drying clothes, and dressing room, as well as lunch room. The lock-up shall have tables, and benches with provision for drying clothes. Such lock-up shall have windows and venting with adequate lighting and provision for continuous heat twenty-four (24) hours a day. The Employer shall be responsible for having the lock-up cleaned out daily and kept cleared of building material and other construction paraphernalia. Additional shelters shall be provided for employees to eat their lunch as may be required. 9.09 In case of fire or burglary on property or premises provided by the Employer, the Employer shall protect the value of an employee’s work clothes up to a total of three hundred and fifty dollars ($350.00). The Employer shall also provide fire and burglary insurance for the employees required tools to a total value of the tools, tool for tool, make for make, provided an inventory of tools and clothing is filed with the Employer. The Employer shall supply the required forms and obtain the inventory from each employee. The employee shall receive a signed copy of the inventory from the Employer. Coverage will commence at the date of the filing of the inventory with the Employer. Where an employee fails to file an inventory his rights to submit a claim shall be waived. (a) All mechanics, welders, servicemen, tire servicemen, drill doctors, steel sharpeners, bodymen painters, and mechanics and welder apprentices who request coveralls shall have these supplied and cleaned by the Employer. There shall be one change a week available in the employee’s proper size. Employees are expected to take reasonable care of coveralls supplied. In the event that an employee does not return the coveralls supplied to him by the Employer, the Employer shall charge the cost of same to the employee and deduct this cost from any monies owing to the employee. When requested, coveralls shall be supplied on a temporary basis to employees who assist on work as described above, or where the Employer and the Union mutually agree that coveralls are required. (b) Employees entitled to receive coveralls as provided herein may obtain an additional change of coveralls in any one week providing the condition of the coveralls requires a change. The shop xxxxxxx shall use discretion in authorizing the additional change. (c) All shops shall provide adequate clean-up facilities. 9.11 The Employer shall pay the cost of obtaining operators’ licences other than those required under the Motor Vehicles Act for employees covered by this Agreement. 9.12 No employee will be permitted to use his own motor vehicle in a manner which is unfair to other members or against the best interest of the Union. 9.13 Each employee being terminated will be given one (1) hour’s notice of termination by the Employer or one (1) hour’s pay allowed in lieu thereof. Heavy duty mechanics and apprentice mechanics may utilize this hour to gather together their tools and put them in shape for their next job. 9.14 When a mechanic leaves the employ of the Employer, the Employer shall be required to pay cost of shipping mechanic’s tools. Tools shall be shipped within forty-eight (48) hours of his leaving his employment, subject to the same conditions as govern transportation. When an Operating Engineer elects to transport his own tools to and from the jobsite, the employee shall be paid the rate of two dollars and seventy-five cents ($2.75) per one hundred (100) pounds per one hundred (100) miles. (e.g. $2.75 x 528 pounds x 273 miles = $39.64). Where the Employer fails to comply with the above, the employee shall be deemed to be still on the payroll of the Employer and shall receive his usual wages and all other conditions of this Agreement until there is compliance with these provisions. 9.15 Where an employee is involved in an accident while on the job and as a result is unable to perform his work, he shall receive a full day’s pay for the day of the accident.

  • Conditions to Obligations of the Parties The obligation of the Parties to effect the Generation Exchange and the other transactions contemplated by this Agreement shall be subject to the fulfillment at or prior to the Exchange Closing Date, of the following conditions: (a) The waiting period under the HSR Act applicable to the consummation of the exchange of the Exchange Assets contemplated hereby shall have expired or been terminated; (b) No preliminary or permanent injunction or other order or decree by any Governmental Authority which prevents the consummation of the exchange of the Exchange Assets contemplated herein shall have been issued and remain in effect (each Party agreeing to use its reasonable best efforts to have any such injunction, order or decree lifted) and no statute, rule or regulation shall have been enacted by any state or federal government or Governmental Authority prohibiting the consummation of the exchange of the Exchange Assets; (c) The DLC Nuclear Closing as defined in the Nuclear Conveyance Agreement shall have occurred; (d) The CAPCO Settlement Agreement shall have been executed by DLC, the FE Subsidiaries and TEC; (e) The Support Agreement shall have been executed by FE and DLC; (f) All consents or approvals, filings with, or notices to any Governmental Authority that are necessary for the consummation of the transactions contemplated by each of the CAPCO Settlement Agreement and the Electrical Facilities Agreement shall have been obtained or made, other than such consents, approvals, filings or notices which are not required in the ordinary course to be obtained or made prior to the consummation of the transactions thereunder or which, if not obtained or made, will not prevent the parties thereto from performing their material obligations thereunder; and (g) There shall be no court order requiring DQE to consummate the transactions contemplated under the Agreement and Plan of Merger between DQE and Allegheny Energy, Inc.

  • GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site. Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer. Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations. Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage. Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over xxxxxxx of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer. Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized. Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel. Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations. Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job. Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours. Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement. Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.

  • Conditions of Use CLIENT acknowledges that its use of the Site is subject to and conditioned upon the following terms and agrees that TAILGATE GUYS may exercise any of the remedies set forth herein for CLIENTS failure to comply: a. CLIENT shall comply with all rules and regulations established by TAILGATE GUYS, University of Michigan, and any other applicable authority, including but not limited to parking regulations in effect on campus. A copy of current rules and regulations is attached hereto as Exhibit A, which shall be subject to adjustment at any time by TAILGATE GUYS, University of Michigan or other applicable authorities. b. CLIENT shall be permitted to access the Site at the respective times set forth in the rules or otherwise determined by TAILGATE GUYS and University of Michigan. c. CLIENT acknowledges all risks related to its attendance and use of the site, including risk of damage to or loss of property or risk of serious personal injury or death, and accepts sole responsibility for such risks. CLIENT shall secure all personal property in and around the Site and shall take all precautions necessary to prevent theft or destruction thereof. CLIENT expressly acknowledges and agrees that TAILGATE GUYS shall not be responsible for any personal property of or injury to CLIENT at any time. TAILGATE GUYS will not remove or hold for safe-keeping any personal items left on the Site after event closing and same will be subject to removal by University of Michigan facilities. CLIENT may be subject to costs and fees associated with such removal. d. Eligibility for any TAILGATE GUYS drop off service is determined by Tailgate Guys in its sole discretion and is based on University restrictions, staffing availability and other factors. If CLIENT is eligible to participate in any TAILGATE GUYS drop off service, the CLIENT is responsible for properly packaging all items that will be transported and otherwise agrees to comply with procedures established by TAILGATE GUYS for this “drop off service,” including but not limited to any limitations with regard to the amount and size of items to be transported. TAILGATE GUYS will not be responsible for any damaged or broken items during unloading or loading and transportation to or from the Site. e. CLIENT shall respect the interests of other fans and clients of TAILGATE GUYS and shall not engage in or permit disorderly or offensive conduct in or around the Site. CLIENT further agrees not to exceed the maximum number of guests allowed within the as set forth in the Exhibit A. Should CLIENT violate these provisions, TAILGATE GUYS management will give CLIENT a verbal warning. If CLIENT fails to promptly come into compliance, TAILGATE GUYS may immediately revoke CLIENT’s rights to the Site and in its sole and absolute discretion terminate this Agreement. Upon such revocation or termination, all amounts paid to TAILGATE GUYS with be forfeited by CLIENT and retained by TAILGATE GUYS. f. CLIENT shall not move, alter, or disrupt operation of any media equipment provided by TAILGATE GUYS. In the event of inclement weather, TAILGATE GUYS reserves the exclusive right to cover and protect all equipment associated with the Media Package with such materials and coverings as it deems appropriate, which may include gator covers or hard cases for TV’s, plastic bags for receivers and generators or the like (collectively, the "Protective Equipment"). CLIENT shall not remove any Protective Equipment or items contained inside Protective Equipment, and expressly acknowledges and agrees that only TAILGATE GUYS staff shall have authority to do so. CLIENT acknowledges and agrees that its right to use the media equipment may be suspended, without refund, at TAILGATE GUYS option, for violation of these provisions, and CLIENT further assumes all responsibility for any damages to media equipment resulting from violation of these provisions and shall reimburse TAILGATE GUYS for the cost to repair or replace damaged equipment. g. CLIENT shall keep the Site in a neat and orderly manner at all times and may incur fees set forth on Exhibit A, attached hereto and made a part hereof. h. CLIENT acknowledges and agrees that the signage identifying each Site is uniform and provided by TAILGATE GUYS, who reserves the right to omit any vulgar, offensive or discriminatory content requested by CLIENT, in the sole and absolute discretion of TAILGATE GUYS. i. TAILGATE GUYS reserves the right to immediately terminate CLIENT’s use of the Site for violation of the conditions of use. In addition, CLIENT shall be responsible for payment of all damages incurred by TAILGATE GUYS as a result of CLIENT’s failure to comply with the foregoing conditions of use or as a result of damages by CLIENT of any equipment of TAILGATE GUYS. To insure compliance and payment of damages or fines, CLIENT agrees to keep a credit card on file with TAILGATE GUYS, and hereby authorizes TAILGATE to charge said credit card amounts owing as a result of its breach; provided that TAILGATE GUYS delivers to CLIENT an itemization of said charges and receipt for payment thereof.

  • Conditions to Obligations of Sellers The obligations of Sellers to consummate the transactions contemplated by this Agreement are subject to the fulfillment or written waiver, prior to or at the Closing, of each of the following conditions; provided, however, that in no event may Sellers waive the conditions contained in Section 7.3(h) or Section 7.3(i): (a) Each of the representations and warranties of Purchaser contained in ARTICLE V of this Agreement shall be true and correct (disregarding for the purpose of such determination any qualification as to materiality or Purchaser Material Adverse Effect) as of the Closing Date as if made on such date (except for representations and warranties that speak as of a specific date or time, which representations and warranties shall be true and correct only as of such date or time), except to the extent that any breaches of such representations and warranties, individually or in the aggregate, have not had, or would not reasonably be expected to have, a Purchaser Material Adverse Effect. (b) Purchaser shall have performed or complied in all material respects with all agreements and obligations required by this Agreement to be performed or complied with by it prior to or at the Closing. (c) Purchaser shall have delivered, or caused to be delivered, to Sellers: (i) Parent Warrant A (including the related warrant agreement), duly executed by Purchaser; (ii) Parent Warrant B (including the related warrant agreement), duly executed by Purchaser; (iii) a certificate executed as of the Closing Date by a duly authorized representative of Purchaser, on behalf of Purchaser and not in such authorized representative’s individual capacity, certifying that the conditions set forth in Section 7.3(a) and Section 7.3(b) are satisfied; (iv) stock certificates evidencing the Parent Shares, duly endorsed in blank or accompanied by stock powers duly endorsed in blank, in proper form for transfer, including any required stamps affixed thereto; (v) the Equity Registration Rights Agreement, duly executed by Purchaser;

  • Conditions to Obligations of Each Party The respective obligations of each Party to perform this Agreement and consummate the Merger and the other transactions contemplated hereby are subject to the satisfaction of the following conditions, unless waived by both Parties pursuant to Section 11.6:

  • Conditions to Obligations of Parent The obligation of Parent to effect the Merger is also subject to the satisfaction, or waiver by Parent, at or prior to the Effective Time, of the following conditions:

  • Conditions Precedent to Obligations of Sellers The obligations of Sellers to consummate the transactions contemplated by this Agreement are subject to the satisfaction (or waiver by Sellers’ Representative in writing) of the following conditions as of the Closing Date:

  • Conditions to Obligations of the Purchasers The obligations of the Purchasers to consummate the Purchase shall be subject to the fulfillment on or prior to the Closing of each of the following conditions: (a) No statute, rule or regulation or order of any court or administrative agency shall be in effect which prohibits the consummation of the transactions to be consummated at Closing; (b) The waiting period required by the Hxxx-Xxxxx-Xxxxxx Antitrust Improvements Act of 1976, as amended, applicable to the consummation of the transactions contemplated by this Agreement shall have expired or been terminated by the Federal Trade Commission and the Antitrust Division of the United States Department of Justice. (c) Each of the representations and warranties of the Company contained in this Agreement shall be true and correct as of the Closing (except to the extent such representations and warranties are made as of a particular date, in which case such representations and warranties shall have been true and correct in all material respects as of such date) and the Company shall have delivered to the Purchasers a certificate, dated the Closing Date and signed by the Company to the effect set forth in this Section 5.1(c); (d) The holders of Common Stock of the Company present in person or by proxy at a duly called meeting of the Company’s stockholders shall have authorized and approved the issuance and sale of the Securities to the Purchasers by the affirmative vote of a majority of the votes cast at such meeting, provided that the total votes cast on the proposal represent at least 50% of the Common Stock entitled to vote thereon (the “Company Stockholder Approval”). (e) The Company in all material respects shall have performed, satisfied and complied with each of its covenants and agreements set forth in this Agreement to be performed, satisfied and complied with prior to or at Closing; (f) The Purchasers and the Company shall have executed a registration rights agreement substantially in the form attached hereto as Exhibit A; (g) The Purchasers, the PCP Entities and Penske shall have executed a stockholders agreement substantially in the form agreed prior to the date hereof (the “Stockholders Agreement”); (h) The Purchasers, the Company and the other parties thereto shall have executed a termination of the Second Amended and Restated Stockholders Agreement substantially in the form agreed prior to the date hereof; and (i) The Purchasers shall have received an opinion, addressed to them, and dated the Closing Date, from counsel to the Company in form and substance reasonably satisfactory to the Purchasers with respect to completion of corporate action and enforceability.

  • Conditions to Obligations of Seller The obligations of Seller to consummate the transactions contemplated by this Agreement shall be subject to fulfillment at or prior to the Closing of the following conditions (any one or more of which may be waived in whole or in part by Seller):

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!