Year Limited Power Output Warranty. In addition, Xxxxx Solar warrants that for a period of twenty-five years commencing on the Warranty Start Date loss of power output of the nominal power output specified in the relevant Product Data Sheet and measured at Standard Test Conditions (STC) for the Product(s) shall not exceed For Polycrystalline Products (as defined in Sec. 1 a): 2.5 % in the first year, thereafter 0.7% per year, ending with 80.7% in the 25th year after the Warranty Start Date, For Monocrystalline Products (as defined in Sec. 1 b): 3.5 % in the first year, thereafter 0.68% per year, ending with 80.18% in the 25th year after the Warranty Start Date.
Year Limited Power Output Warranty. In addition, Xxxxx Solar warrants that for a period of twenty-five years commencing on the Warranty Start Date, the loss of power output relating to the initial guaranteed power which is defined as Peak Power Xxxxx Pmax(Wp) plus Peak Power Xxxxx Pmax(Wp) multiplied by the lower limit of the Power Output Tolerance Pmax(%)–as specified in the relevant Product Data Sheet and measured at Standard Test Conditions (STC) for the Product(s) shall not exceed For Polycrystalline Products (as defined in Sec. 1 a): 2.5% in the first year, thereafter 0.7% per year, ending with 80.7% in the 25th year after the Warranty Start Date, For Monocrystalline Products (as defined in Sec. 1 b): 3.0% in the first year, thereafter 0.68% per year, ending with 80.68% in the 25th year after the Warranty Start Date.
Year Limited Power Output Warranty. In addition, Peimar warrants that for a period of thirty years commencing on the Warranty Start Date, the loss of power output relating to the initial guaranteed power which is defined as Peak Power Xxxxx Pmax(Wp) plus Peak Power Xxxxx Pmax(Wp) multiplied by the lower limit of the Power Output Tolerance Pmax(%)–as specified in the relevant Product Data Sheet and measured at Standard Test Conditions (STC), net of the measurement tolerances applied in the laboratory where the tests are run- for the Product(s) shall not exceed - For Poly-crystalline Products (as defined in Sec. 1 a): 2% in the first year, thereafter 0.6% per year, ending with 80.6% in the 30th year after the Warranty Start Date, - For Mono-crystalline Products (as defined in Sec. 1 b): 3% in the first year, thereafter 0.59% per year, ending with 79.90% in the 30th year after the Warranty Start Date.
Year Limited Power Output Warranty. In addition, Xxxxx Solar warrants that for a period of twenty-five years commencing on the Warranty Start Date, the loss of power output relating to the initial guaranteed power which is defined as Peak Power Xxxxx Pmax(Wp) plus Peak Power Xxxxx Pmax(Wp) multiplied by the lower limit of the Power Output Tolerance Pmax(%)–as specified in the relevant Product Data Sheet and measured at Standard Test Conditions (STC: irradiation1000w/m²,temperature25°,AM1.5) for the Product(s) shall not exceed and measurement shall either be carried out by Xxxxx Solar or by a third-party testing institute recognized by Xxxxx Solar and the customer. (Remark: According to STC, Measurement system uncertainty should be included in all actual power output measurements.) For Polycrystalline Products (as defined in Sec. 1 a): 2.5% in the first year, from the 2nd year to the 25th year, the average annual power decline will be no more than 0.7%. By the end of the 25th year, the actual power output will be no less than 80.7%； For Standard Monocrystalline Products (as defined in Sec. 1 b): 3.0% in the first year, from the 2nd year to the 25th year, the average annual power decline will be no more than 0.68%. By the end of the 25th year, the actual power output will be no less than 80.68%； For Monocrystalline PERC Products (as defined in Sec. 1 b): 2.5% in the first year, from the 2nd year to the 25th year, the average annual power decline will be no more than 0.68%. By the end of the 25th year, the actual power output will be no less than 81.18%.
Year Limited Power Output Warranty. In addition, for the photovoltaic cells of the Products listed under Sec. 1 a), b) and the photovoltaic cells on the front side (sunny side) of Products listed under Sec. c), d) Xxxxx Solar warrants that for a period of thirty years commencing on the Warranty Start Date, the loss of power output relating to the initial guaranteed power which is defined as Peak Power Xxxxx Pmax(Wp) plus Peak Power Xxxxx Pmax(Wp) multiplied by the lower limit of the Power Output Tolerance Pmax(%)––as specified in the relevant Product Data Sheet and measured at Standard Test Conditions (STC: irradiation1000w/m²,temperature25°,AM1.5) for the Product(s) shall not exceed and measurement shall either be carried out by Xxxxx Solar or by a third-party testing institute recognized by Xxxxx Solar and the customer. (Remark: According to STC, measurement system uncertaintyshould be included in all actual power output measurements.) • For Polycrystalline Duomax Products (as defined in Sec. 1 a): 2.5 % in the first year, from the 2nd year to the 30th year, the average annual power decline will be no more than 0.5%. By the end of the 30th year, the actual power output will be no less than 83%; • For Standard Monocrystalline Duomax Products (as defined in Sec. 1 b): 3.0% in the first year, from the 2nd year to the 30th year, the average annual power decline will be no more than 0.5%. By the end of the 30th year, the actual power output will be no less than 82.5%; • For Monocrystalline PERC Duomax Products (as defined in Sec. 1 b): 2.5% in the first year, from the 2nd year to the 30th year, the average annual power decline will be no more than 0.5%. By the end of the 30th year, the actual power output will be no less than 83%; • For Polycrystalline Duomax Twin Products (as defined in Sec.1 c): 2.5% in the first year, from the 2nd year to the 30th year, the average annual power decline will be no more than 0.5%. By the end of the 30th year, the actual power output will be no less than 83%; • For Monocrystalline PERC Duomax Twin Products(as defined in Sec.1 d): 2.5% in the first year, from the 2nd year to the 30th year, the average annual power decline will be no more than 0.5%. By the end of the 30th year, the actual power output will be no less than 83%
Year Limited Power Output Warranty. In addition, Xxxxx Solar warrants that for a period of twenty-five years commencing on the Warranty Start Date, the loss of power output relating to the initial guaranteed power which is defined as Peak Power Xxxxx Pmax(Wp) plus Peak Power Xxxxx Pmax(Wp) multiplied by the lower limit of the Power Output Tolerance Pmax(%)–as specified in the relevant Product Data Sheet and measured at Standard Test Conditions (STC) for the Product(s) shall not exceed For Polycrystalline Products (as defined in Sec. 1 a): 2.5% in the first year, thereafter 0.7% per year, ending with 80.7% in the 25th year after the Warranty Start Date, For Monocrystalline Products (as defined in Sec. 1 b): 3.0% in the first year, thereafter 0.68% per year, ending with 80.68% in the 25th year after the Warranty Start Date. The actual power output shall be determined for verification using STC only and measurement shall either be carried out by Xxxxx Solar or by a Xxxxx Solar recognized third- party testing institute. (Remark: According to STC, Measurement system uncertainty will be applied to all actual power output measurements.)
Year Limited Power Output Warranty. In addition, Xxxxx Solar warrants that for a period of thirty years commencing on the Warranty Start Date, the loss of power output of the Peak Power Xxxxx – Pmax (Wp) - minus minimum Power Output Tolerance – Pmax (%) - specified in the relevant Product Data Sheet and measured at Standard Test Conditions (STC) for the Product(s) shall not exceed 2.5 % in the first year, thereafter 0.5% per year, ending with 83% in the 30th year after the Warranty Start Date.
Year Limited Power Output Warranty. In addition, Xxxxx Solar warrants that for a period of twenty-five years commencing on the Warranty Start Date, the loss of power output of the Peak Power Xxxxx – Pmax (Wp) - minus minimum Power Output Tolerance – Pmax (%) - specified in the relevant Product Data Sheet and measured at Standard Test Conditions (STC) for the Product(s) shall not exceed • For Polycrystalline Products (as defined in Sec. 1 a): 2.5 % in the first year, thereafter 0.7% per year, ending with 80.7% in the 25th year after the Warranty Start Date, • For Monocrystalline Products (as defined in Sec. 1 b): 3.5 % in the first year, thereafter 0.68% per year, ending with 80.18% in the 25th year after the Warranty Start Date.
Year Limited Power Output Warranty. In addition, for the photovoltaic cells of the Products listed under Sec. 1 a), b) and the photovoltaic cells on the front side (sunny side) of Products listed under Sec. c), d) Xxxxx Solar warrants that for a period of thirty years commencing on the Warranty Start Date, the loss of power output relating to the initial guaranteed power which is defined as Peak Power Xxxxx Pmax(Wp) plus Peak Power Xxxxx Pmax(Wp) multiplied by the lower limit of the Power Output Tolerance Pmax(%)––as specified in the relevant Product Data Sheet and measured at Standard Test Conditions (STC) for the Product(s) shall not exceed For Polycrystalline Duomax Products (as defined in Sec. 1 a): 2.5 % in the first year, thereafter 0.5% per year, ending with 83% in the 30th year after the Warranty Start Date, For Monocrystalline Duomax Products (as defined in Sec. 1 b): 3.0% in the first year, thereafter 0.5% per year, ending with 82.5% in the 30th year after the Warranty Start Date. For Polycrystalline Duomax Twin Products (as defined in Sec.1 c): 2.5% in the first year, thereafter 0.5% per year, ending with 83% in the 30th year after the Warranty Start Date, For Monocrystalline Duomax Twin Products(as defined in Sec.1 d): 3.0% in the first year, thereafter 0.5% per year, ending with 82.5% in the 30th year after the Warranty Start Date. The actual power output shall be determined for verification using STC only and measurement shall either be carried out by Xxxxx Solar or by a Xxxxx Solar recognized third- party testing institute. (Remark: According to STC, measurement system uncertainty will be applied to all actual power output measurements.)
Year Limited Power Output Warranty. Besides the abovementioned 10 year Limited Power Output Warranty, Luxen Solar warrants that for a period of twenty‐five years commencing on the Warranty Start Date loss of power output of the nominal power output specified in the relevant Product Data Sheet and measured at Standard Test Conditions (STC) for the Product(s) shall not exceed 20%.
