Additional Tests definition

Additional Tests shall have the meaning set forth in Section 5.4.1.
Sample 1Sample 2Sample 3
Additional Tests has the meaning set forth in the “Acceptance Test Procedures” Exhibit.
Sample 1Sample 2Sample 3
Additional Tests has the meaning given in Section 4.5(a).
Sample 1Sample 2

Examples of Additional Tests in a sentence

  • We strive to demonstrate excellence in our service, transparency in our actions, and fairness in all we do.

  • Syst (HD Truck) $.15/hour ** Additional Tests (to a max of 10) $.05/hour Diesel Repair $.15/hour Health Care Bus Aide $.50/hour Additional Stipends - see Article XVIII In addition, the current truck drivers and warehouse keeper leader will be grandfathered into the position of Truck Driver/Warehouse/Grounds at the rate of pay of the former Grounds Attendant Trainee.

  • The Additional Tests, (i.e., gain slope, C-notched noise, 1004 Hz loss, C-message noise and balance) may be ordered by the customer at additional charges, 60 days prior to the start of the customer prescribed schedule.

  • To request the add-on tests use the form titled “Request Form for Additional Tests on Sample Previously sent to Laboratory Medicine” reference FOR-CUH-PAT-1732.

  • Where inspection or testing is to be conducted by an independent laboratory or testing agency, materials or samples thereof shall be selected by the laboratory, testing agency, the Project Inspector, Construction Manager or Architect and not by the Contractor.11.4. Additional Tests, Inspections and Approvals.

  • Additionally, test cubes for compressive strength testing shall be prepared by personnel from a testing laboratory certified by an organization accredited by the Standards Council of Canada according to CSA A283 for Additional Tests according to CSA A3004-2C.

  • If, for any reason, the parties do not execute a Subsequent Development Agreement for a particular Additional Test, the parties rights and obligations under this Section 9.5 shall continue with respect to the other Additional Tests.

  • The Additional Tests as set forth in (2), following, may be ordered by the customer, at additional charges, 60 days prior to the start of the customer prescribed schedule.

  • The Additional Tests, (i.e., gain slope, C- notched noise, 1004 Hz loss, C-message noise and balance) may be ordered by the customer at additional charges, 60 days prior to the start of the customer prescribed schedule.

  • If the parties execute Subsequent Development Agreements relating to any two (2) of the Additional Tests, the parties’ respective rights and obligations under this Section 9.5 shall terminate with respect to the other Additional Tests.


More Definitions of Additional Tests

Additional Tests means any tests required as a result of failure to submit to tests required in a corrective action plan.
Sample 1

Related to Additional Tests

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Over-Riding Nomination Criteria means the criteria set out in clause 4.2.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • ASAM criteria means admission, continued service, transfer, and discharge criteria for the treatment of substance use disorders as published by the American Society of Addiction Medicine (ASAM).

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Covenant Testing Period means a period (a) commencing on the last day of the fiscal month of Parent most recently ended prior to a Covenant Trigger Event for which Borrowers are required to deliver to Agent monthly financial statements pursuant to Schedule 5.1 to this Agreement, and (b) continuing through and including the first day after such Covenant Trigger Event that Availability has equaled or exceeded the greater of (a) 15% of the Maximum Revolver Amount, and (b) $4,500,000 for 60 consecutive days.

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Design Criteria means the design criteria set out in the Ministry’s publication “Design Criteria for Sanitary Sewers, Storm Sewers and Forcemains for Alterations Authorized under Environmental Compliance Approval”, (as amended from time to time).

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Nomination Criteria means the criteria made up of the Over-Riding Nomination Criteria andthe Specific Nomination Factors, and is also referred to as “this Criteria”.

  • Design Criteria Package means concise, performance-oriented drawings or specifications for a public construction project. The purpose of the Design Criteria Package is to furnish sufficient information to permit Design-Build Firms to prepare a bid or a response to the District’s Request for Proposals, or to permit the District to enter into a negotiated Design- Build Contract. The Design Criteria Package must specify performance- based criteria for the public construction project, including the legal description of the site, survey information concerning the site, interior space requirements, material quality standards, schematic layouts and conceptual design criteria of the project, cost or budget estimates, design and construction schedules, site development requirements, provisions for utilities, stormwater retention and disposal, and parking requirements applicable to the project. Design Criteria Packages shall require firms to submit information regarding the qualifications, availability, and past work of the firms, including the partners and members thereof.

  • Initial compliance period means the three-year compliance period that begins January 1, 1993, except for the MCLs for dichloromethane, 1,2,4-trichlorobenzene, 1,1,2-trichloroethane, benzo(a)pyrene, dalapon, di(2-ethylhexyl)adipate, di(2-ethyl- hexyl)phthalate, dinoseb, diquat, endothall, endrin, glyphosate, hexachlorobenzene, hexachlorocyclopentadiene, oxamyl, picloram, simazine, 2,3,7,8-TCDD, antimony, beryllium, cyanide, nickel, and thallium, as they apply to a supplier whose system has fewer than 150 service connections, for which it means the three-year compliance period that began on January 1, 1996.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Time for Completion means the time for completing the Works as stated in the Contract Data (or as extended under Sub-Clause 7.3), calculated from the Commencement Date.

  • Review Criteria has the meaning assigned to that term in Section 12.02(b)(i).

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Selection Criteria means and includes all of the requirements, considerations,

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • S&P CDO Monitor Test A test that will be satisfied on any date of determination (following receipt, at any time on or after the S&P CDO Monitor Election Date, by the Issuer and the Collateral Administrator of the Class Break-even Default Rates for each S&P CDO Monitor input file (in accordance with the definition of “Class Break-even Default Rate”)) if, after giving effect to a proposed sale or purchase of an additional Collateral Obligation, the Class Default Differential of the Highest Ranking Class of the Proposed Portfolio is positive. The S&P CDO Monitor Test will be considered to be improved if the Class Default Differential of the Proposed Portfolio that is not positive is greater than the corresponding Class Default Differential of the Current Portfolio.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Acceptance Criteria means the Specifications, goals, performance measures, testing results and/or other criteria designated by the Agency and against which the Deliverables may be evaluated for purposes of Acceptance or Non-acceptance thereof.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.