Alterations or modifications definition

Alterations or modifications means making a change to the construction, configuration, performance, environmental characteristics, or operating limitations of the affected civil aeronautical product.
Sample 1Sample 2Sample 3
Alterations or modifications means making a change to the construction configuration performance, environmental characteristics, or operating limitations of the affected civil aeronautical product.
Sample 1

Examples of Alterations or modifications in a sentence

  • The Department Head, with the concurrence of the City’s signatory as required by the City’s Purchasing Policy 2-272 (Alterations or modifications of contracts), shall without notice to any sureties, have the authority to order changes in this Contract which affect the cost or time of performance.

  • Alterations or modifications made on the unit or the installation is strictly forbidden as it may predispose the user to hazardous risks.

  • Alterations or modifications to the work performed under a task order under the contract shall be made only by written Change Order between the company and the City Point of Contact prior to commencement of the altered or modified work.

  • Alterations or modifications of equipment and use of non-factory repair parts can lead to dangerous operation and injury.TO AVOID INJURY:• Do not alter or modify equipment.• Do use only factory replacement parts.

  • Under no circumstance should the machine be operated without these devices in place.• Alterations or modifications to this machine can reduce safety and could cause damage to the machine.Do not alter safety devices or operate with shields or covers removed.• Before each use, verify that all controls function properly and inspect all safety devices.

  • Alterations or modifications made by the dealer, without written permission of the manufacturer, shall relieve the manufacturer of the warranty requirements of subsection A of this section for the item altered or modified and any damage resulting from the alteration or modification.

  • Alterations or modifications of the hard hat or hard hatliner shall be prohibited.

  • Alterations or modifications to existing railroad bridges, such as temporary detours, alterations to foundations and abutments for the bridges that are to remain in place, and approaches thereto, including trackage that must be altered/modified as a result of any project related bridge alteration/modification, will be considered a part of the project construction cost and will be cost shared in accordance with the cost sharing applicable to the project purposes.

  • Alterations or modifications to the terms or conditions of the Fuel Oil and Gasoline Bid Specifications shall be considered non-responsive and therefore rejected from qualification.

  • Alterations or modifications of equipment and use of non-factory repair parts can lead to dangerous operation and injury.To avoid injury:DO NOT alter or modify equipment.DO NOT use equipment to lift, support or otherwise transport people.DO NOT suspend unattended loads over people.

Related to Alterations or modifications

  • Minor modification means a modification that does not significantly alter the nongovernmental function or purpose of the software or is of the type customarily provided in the commercial marketplace.

  • Alterations means all changes, additions, improvements or repairs to, all alterations, reconstructions, renewals, replacements or removals of and all substitutions or replacements for any of the Improvements or Equipment, both interior and exterior, structural and non-structural, and ordinary and extraordinary.

  • Alteration means the marking, changing or altering in a material way of the terms, meaning or legal effect of a document with the intent to deceive.

  • Major modification means any physical change in or change in the method of operation of a major stationary source that would result in a significant emissions increase of a regulated NSR pollutant and a significant net emissions increase of that pollutant from the major stationary source.

  • Structural Alterations means any Alterations involving the structural, mechanical, electrical, plumbing, fire/life safety or heating, ventilating and air conditioning systems of the Building.

  • Modifications means any amendments, supplements, modifications, renewals, replacements, consolidations, severances, substitutions and extensions of any document or instrument from time to time; “Modify”, “Modified,” or related words shall have meanings correlative thereto.

  • Permit modification means a revision to a Title V operating permit that cannot be accomplished under the provisions for administrative permit amendments found at rule 567—22.111(455B). A permit modification for purposes of the acid rain portion of the permit shall be governed by the regulations pertaining to acid rain found at rules 567—22.120(455B) to 567—22.147(455B). This definition of “permit modification” shall be used solely for purposes of this chapter governing Title V operating permits.

  • Substantial modification means modification of a relevant source that results in a significant increase in emissions, excluding any change in emissions resulting from by-product recovery. It shall be a matter for the Party to decide whether a modification is substantial or not;

  • Modification means (i) a change to the delivered source code or metadata; or (ii) any development, other than a change to the delivered source code or metadata, that customizes, enhances, or changes existing functionality of the Software including, but not limited to, the creation of any new application program interfaces, alternative user interfaces or the extension of SAP data structures; or (iii) any other change to the Software (other than an Add-on) utilizing or incorporating any SAP Materials (defined below).

  • Basic Terms Modification means any proposal:

  • Material Modifications means any modifications to the material related party transactions which were approved by the Audit Committee or Shareholders during the year which will change the complete nature of the transaction and in case of monetary thresholds which is in excess of 10% of the originally approved transaction, in case of exigencies only.

  • Permitted Modifications As defined in Section 2.02(a) of the Servicing Agreement.

  • Structural as herein used shall mean any portion of the Leased Premises, Building or Common Areas of the Complex which provides bearing support to any other integral member of the Leased Premises, Building or Common Areas of the Complex such as, by limitation, the roof structure (trusses, joists, beams), posts, load bearing walls, foundations, girders, floor joists, footings, and other load bearing members constructed by Landlord.

  • Structural alteration means an Alteration that (i) will result in a change in the footprint of the Improvements, (ii) involves the addition of one or more floors to the Improvements, (iii) affects the structural elements or any exterior walls of the Improvements, (iv) decreases the rentable square footage of the Leased Premises other than to a de minimis extent or (v) adversely affects the proper functioning and/or capacity of the building systems in the Improvements.

  • Contract Modification means any changes in the terms or provisions of the Contract which are reduced to writing and fully executed by both parties.

  • Substitute Improvements means the substitute or additional improvements of the Issuer described in Article V hereof.

  • Installations means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • Erection, construction, remodeling, repairing means all types of work done on a particular building or work at the site thereof in the construction or development of the project, including without limitation, erecting, construction, remodeling, repairing, altering, painting, and decorating, the transporting of materials and supplies to or from the building or work done by the employees of the Contractor, Subcontractor, or Agent thereof, and the manufacturing or furnishing of

  • Additions means any and all alterations, additions, accessions and improvements to property, substitutions therefor, and renewals and replacements thereof.

  • Tenant Improvements Defined in Exhibit B, if any.

  • Renovation means altering a facility or one or more facility components in any way, including the stripping or removal of RACM from a facility component. Operations in which load-supporting structural members are wrecked or taken out are demolitions.

  • Permitted Modification shall have the meaning ascribed thereto in Section 4.02.

  • Change Orders mean changes or modifications to any Construction Contract or any other contract with labor or material suppliers.

  • Construction and demolition waste means the waste building materials, packaging, and rubble resulting from construction, remodeling, repair, and demolition operations on pavements, houses, commercial buildings and other structures.

  • Major renovation means the renovation of a building where:

  • PAL major modification means, notwithstanding the definitions for major modification and net emissions increase in 326 IAC 2-2-1, any physical change in or change in the method of operation of the PAL source that causes it to emit the PAL pollutant at a level equal to or greater than the PAL.