Clear wood coatings definition

Clear wood coatings means clear and semi-transparent coatings, including lacquers and varnishes, applied to wood substrates to provide a transparent or translucent solid film.
Sample 1Sample 2Sample 3
Clear wood coatings means any clear or semitransparent coating, including lacquers and varnishes, applied to wood substrates to provide a transparent or translucent solid film.
Sample 1Sample 2Sample 3
Clear wood coatings means clear and semi-transparent coatings, including clear brushing lacquers, clear lacquer sanding sealers, sanding sealers other than clear lacquer sanding sealers and varnishes, applied to wood substrates to provide a transparent or translucent film.
Sample 1Sample 2Sample 3

Examples of Clear wood coatings in a sentence

  • Clear wood coatings formulated for and applied to bare wood for sanding and to seal the wood for subsequent application of varnish.

  • Clear wood coatings" means clear and semi-transparent coatings, including lacquers and varnishes, applied to wood substrates to provide a transparent or translucent solid film.

  • Clear wood finishes, excluding clear lacquer sanding sealers, formulated with nitrocellulose or synthetic resins to dry by solvent evaporation without chemical reaction and to provide a solid, protective film, which are intended exclusively for application by brush and which are labeled asspecified in subdivision 205.4([e]g) of this Part.(1) For products manufactured on and after January 1, 2021, this coating category will be subject to the VOC limit for wood coatings.([m]o) 'Clear wood coatings'.


More Definitions of Clear wood coatings

Clear wood coatings means, for coatings manufactured before March 1, 2017, clear and semi-transparent coatings, including clear brushing lacquers, clear lacquer sanding sealers, sanding sealers other than clear lacquer sanding sealers and varnishes, applied to wood substrates to provide a transparent or translucent film. For products manufactured on or after March 1, 2017, the clear wood coatings category is eliminated and
Sample 1Sample 2
Clear wood coatings means clear and semi-transparent coatings, including lacquers and varnishes, applied to wood substrates to provide a transparent or translucent solid film. Effective for products manufactured on or after the effective date, the Clear Wood coating category is eliminated and coatings meeting this definition will be subject to the VOC limit for the applicable category in Table 1.
Sample 1
Clear wood coatings means clear and semi-transparent coatings, including
Sample 1
Clear wood coatings means, for coatings manufactured before March 1, 2017, clear and semi-transparent coatings, including clear brushing lacquers, clear lacquer sanding sealers, sanding sealers other than clear lacquer sanding sealers and varnishes, applied to wood substrates to provide a transparent or translucent film. For products manufactured on or after March 1, 2017, the clear wood coatings category is eliminated and coatings meeting this definition are subject to the VOC limit of the applicable coating category in Table 1-1 of this regulation.
Sample 1

Related to Clear wood coatings

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Appliances means and include electrical, mechanical and electronic appliances such as refrigerator, television, DVD player, videocassette recorder/player, washing machine, microwave oven, music system, personal computer, laptops and air-conditioner contained or fixed in the Insured’s home for domestic use.

  • Recyclables means Solid Waste that may be reclaimed and/or processed and used in the production of raw materials or products.

  • Specialty coating means a coating that, even though the coating meets the definition of a primer, topcoat, or self-priming topcoat, has additional performance criteria beyond those of primers, topcoats, and self-priming topcoats for specific applications. These performance criteria may include, but are not limited to, temperature or fire resistance, substrate compatibility, antireflection, temporary protection or marking, sealing, adhesively joining substrates, or enhanced corrosion protection. A listing of specialty coatings is found in paragraph (D)(1)(b) of rule 3745-21-19 of the Administrative Code.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Semitrailer means every vehicle of the trailer type so designed and used in conjunction with a

  • Furniture coating means any paint designed for application to room furnishings including, but not limited to, cabinets (kitchen, bath and vanity), tables, chairs, beds, and sofas.

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (μg/m3);

  • Waterbody means any accumulation of water, surface or underground, natural or artificial, including rivers, streams, creeks, ditches, swales, lakes, ponds, marshes, wetlands, and ground water. The term does not include any storage or treatment structures.

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • Semiconductor cleanrooms means the integrated systems, fixtures, piping, partitions, flooring,

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Tire means a continuous solid or pneumatic rubber covering encircling the wheel of a tractor or other farm machinery or of a vehicle.

  • Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Flowgate means a representative modeling of facilities or groups of facilities that may act as potential constraint points.

  • Electric bicycle means a “class 1 electric bicycle”, a “class 2 electric bicycle”, or a “class 3 electric bicycle” as defined in this section. (ORC 4511.01(RRR))

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Tube means an x-ray tube, unless otherwise specified.

  • Recyclable means material that can be sorted, cleansed, and reconstituted using the City’s available recycling collection programs for the purpose of using the altered form in the manufacture of a new product. Recycling does not include burning, incinerating, converting, or otherwise thermally destroying solid waste.

  • PJM Interconnection, L.L.C. or "PJM" means the privately-

  • Asphalt means a dark brown to black cement-like material (solid, semisolid, or liquid in consistency) in which the predominating constituents are bitumens which occur in nature as such or which are obtained as residue in refining petroleum.

  • Fiber means a glass strand or strands which is/are protected by a color coded buffer tube and which is/are used to transmit a communication signal along the glass strand in the form of pulses of light.

  • Pipelines has the meaning set forth in the Recitals.

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • recyclable waste means the waste that is commonly found in the MSW. It is also called as "Dry Waste". These include many kinds of glass, paper, metal, plastic, textiles, electronics goods, etc.