Coating Failure definition

Coating Failure means the following:-
Sample 1Sample 2Sample 3
Coating Failure. The warranty against coating failure applies when the abrasion-resistant surface treatment exhibits flaking of the sur- face treatment or loss of adhesion between the surface treatment and the substrate sheet, either of which is visibly detectable without the aid of instruments. Abrasion Resistance: The sheet will not exhibit an increase in haze of more than 15%. Criteria: The sample as manufactured shall be abraded according to Test ASTM D-1044 (Xxxxx Abrader) for 100 cycles with a 500 gram load. Structural Delamination: This warranty covers partial or total separation of the plastic sheet from the interlayer bonding material. Yellowing and Light Transmission: The warranty against loss of light transmission applies only to clear transparent MAKROLON HYGARD sheet with the abrasion resistant surface treatment. The Yellowness Index (YI) of HYGARD sheet (clear only) cleaned accord- ing to the recommendations of A&C Plastics, Inc. shall be less than 5.0 during a three-year period from the date of sale, and shall be less than 10 during a seven-year period from the date of sale as determined according to ASTM D1925 (1977) modified by Sheffield Plastics Inc. as measured with a Hunter Ultrascan spectrophotometer. The light transmission characteristics of MAKROLON HYGARD sheet, cleaned according to the recommendations of A&C Plastics, Inc., shall not decrease (from its initial manufactured v alue) by more than 3% during a three-year period from the date of sale nor by more than 7% during a seven-year period from the date of sale when tested by the procedure specified in ASTM D1003 modified by A&C Plastics, Inc. This warranty is limited to excessive yellowing and light transmission losses due to the degradation of MAKROLON HYGARD sheet and does not cover yellowing or light transmission losses due to dirt, atmospheric deposits, abrasion, or changes in the physical structure of the MAKROLON HYGARD sheet. Nor does this warranty cover exposure to adverse or hazardous chemical or environmental sub- stances or conditions as determined by the manufacturer (including but not limited to those identified in the manufacturer’s fabrication guide). You should be aware that all glazing and outdoor sign materials are subject to irreversible depositions of atmospheric elements and can be expected to show signs of hazing eventually. Regular proper cleaning will significantly reduce, but not eliminate, that process (see reverse side for cleaning and maintenance instructions). This wa...
Sample 1Sample 2
Coating Failure. The warranty against the SUPERCOAT™ failure applies when the abrasion-resistant surface treatment exhibits flaking of the surface treatment or loss of adhesion between the surface treatment and the substrate sheet, either of which is visibly detectable without the aid of instruments. Abrasion Resistance: The windshield/window will not exhibit an increase in haze of more than 15%. Criteria: The sample as manufactured shall be abraded according to Test No. 17 of ANSI Z26.1 (Xxxxx Abrader) for 100 cycles with a 500 gram load.
Sample 1

Examples of Coating Failure in a sentence

  • The Company’s maximum liability is limited to the repair of the Coating Failure (including labour cost) in the affected portion to the extent of the value equal to the original purchase price of the Products (“replacement cost”).

  • Material Properties for Coating Failure Analysisa,b Material Property Non-Aged ConditionAged Condition Representing 40 Years of Service including 109 rad ExposureEpoxy Phenolic aListed properties are a function of moisture content and temperature and are for dry films near room temperaturebTable values without [ ] are measured values nd-not determined Table 3-2.

  • The Use of Triboemission Imaging and Charge Measurements to Study DLC Coating Failure.

  • The Warranty is for the replacement of the Product of an amount equivalent to the Product cost and the labour costs for re-application of the Product due to Coating Failure in the affected portion only as may be necessary to set right the paint failure in the affected portion only in accordance with liability as indicated in the ‘Liability’ section.

  • Mode 1 Coating Failure High Strain LocationsVapor Pressure Topcoat & Primer Substrate Figure C-3.

  • See Respondents’ Stipulations as to Facts at 2-6.On August 4, 2016, the ALJ issued “2016 Further Instructions,” in which she stated, in part: 1.

  • Coating Failure does not mean flaking and peeling of Dampstop Duo, caused by one coat of Dampstop Duo coming off from another or Dampstop Duo film coming off from the substrate, because of water ingress or moisture source or seepage through surfaces due to leakage or cracks or pipe leakage etc.

  • Material Properties for Coating Failure Analysis Using Mode 1 and 2 Failure Modelsa,b Material Property Non-Aged ConditionAged Condition Representing 40 Years of Service including 109 ExposureaListed properties are a function of moisture content and temperature and are for dry films near room temperaturebTable values without [] are measured values Temp.

  • Participants can only use the leisure facilities for two hours per week.

  • Mode 1 Coating Failure High Strain LocationsVapor PressureSubstrateTopcoat & Primer Figure C-3.

Related to Coating Failure

  • Listing Failure means the situation where the Bonds have not been listed on the corporate bond list of Nasdaq Stockholm (or any other Regulated Market) within sixty (60) calendar days after the Issue Date.

  • Reporting Failure has the meaning set forth in Section 2.4.

  • Listing Failure Event means that:

  • GEP Failure means Seller’s failure to produce Delivered Energy in an amount equal to or greater than the Guaranteed Energy Production amount for the applicable Performance Measurement Period.

  • MI Failure means when an MI report: a) contains any material errors or material omissions or a missing mandatory field; or b) is submitted using an incorrect MI reporting Template; or c) is not submitted by the reporting date(including where a Nil Return should have been filed);

  • Service Failure means a failure by the Contractor to provide the Services in accordance with any individual service level described above (measured on a monthly/quarterly/annual basis)

  • Supply Failure has the meaning given to it in Section 7.5.2 (Supply Failure).

  • Technical Failure means the discontinuation of Development or Commercialization of a Product for technical, scientific, medical or regulatory reasons, including, but, not limited to, unacceptable preclinical toxicity, demonstration of a side effect profile significantly worse than currently marketed products, or inability to manufacture in an acceptable purity or for an acceptable price.

  • Persistent Failure means any two (2) or more failures by the Supplier in any rolling period of twelve (12) months to comply with obligations in respect of the Contract Services under the Contract;

  • Epidemic Failure means a series of repeating failures or defects resulting in at least a 0.5% failure rate for the same Product or Material during any twelve-month period.

  • Service Level Failure means a failure to perform the Software Support Services fully in compliance with the Support Service Level Requirements.

  • Volume Failure means, with respect to a particular date of determination, the aggregate daily dollar trading volume (as reported on Bloomberg) of the Common Stock on the Principal Market on any Trading Day during the twenty (20) Trading Day period ending on the Trading Day immediately preceding such date of determination (such period, the “Volume Failure Measuring Period”), is less than $2,000,000 (as adjusted for any stock splits, stock dividends, stock combinations, recapitalizations or other similar transactions occurring after the Subscription Date). All such determinations to be appropriately adjusted for any stock splits, stock dividends, stock combinations, recapitalizations or other similar transactions during such Volume Failure Measuring Period.

  • Milestone Failure means a failure by the Grant Recipient fully to achieve any Milestone by the relevant Milestone Date;

  • Consistent Failure means any of:

  • Transaction Failure Date means the 18-month anniversary of the Effective Date (or the 24 month anniversary of the Effective Date, if a letter of intent, agreement in principle or definitive agreement has been executed within 18 months after the Effective Date and the Business Combination relating thereto has not yet been consummated within such 18-month period).

  • Price Failure means, with respect to a particular date of determination, the VWAP of the Common Stock on any Trading Day during the seven (7) Trading Day period ending on the Trading Day immediately preceding such date of determination fails to exceed the Floor Price (as adjusted for stock splits, stock dividends, stock combinations, recapitalizations or other similar transactions occurring after the date hereof). All such determinations to be appropriately adjusted for any stock splits, stock dividends, stock combinations, recapitalizations or other similar transactions during any such measuring period.

  • Transaction Failure means the failure to consummate a Business Combination within 18 months of the Effective Date (or 24 months after the Effective Date, if a letter of intent, agreement in principle or definitive agreement has been executed within 18 months after the Effective Date and the Business Combination relating thereto has not yet been consummated within such 18-month period).

  • Daily Failure Amount means the product of (x) .005 multiplied by (y) the Closing Sale Price of the Common Stock on the applicable Share Delivery Date.

  • Public Information Failure shall have the meaning ascribed to such term in Section 4.3(b).

  • Registration Failure means that (A) the Company fails to file with the SEC on or before the Filing Deadline (as defined in the Registration Rights Agreement) any Registration Statement required to be filed pursuant to Section 2(a) of the Registration Rights Agreement, (B) the Company fails to use its best efforts to obtain effectiveness with the SEC, prior to the Registration Deadline (as defined in the Registration Rights Agreement), of any Registration Statement (as defined in the Registration Rights Agreement) that is required to be filed pursuant to Section 2(a) of the Registration Rights Agreement, or fails to use its best efforts to keep each such Registration Statement current and effective as required in Section 3 of the Registration Rights Agreement, (C) the Company fails to file any additional Registration Statement required to be filed pursuant to Section 2(a)(ii) of the Registration Rights Agreement on or before the Additional Filing Deadline or fails to use its best efforts to cause such additional Registration Statement to become effective on or before the Additional Registration Deadline, (D) the Company fails to file any amendment to any Registration Statement, or any additional Registration Statement required to be filed pursuant to Section 3(b) of the Registration Rights Agreement within thirty (30) days of the applicable Registration Trigger Date (as defined in the Registration Rights Agreement), or fails to use its best efforts to cause such amendment and/or new Registration Statement to become effective within ninety (90) days of the applicable Registration Trigger Date, (E) any Registration Statement required to be filed under the Registration Rights Agreement, after its initial effectiveness and during the Registration Period (as defined in the Registration Rights Agreement), lapses in effect or sales of all of the Registrable Securities (as defined in the Registration Rights Agreement) cannot otherwise be made thereunder (whether by reason of the Company’s failure to amend or supplement the prospectus included therein in accordance with the Registration Rights Agreement, the Company’s failure to file and use its best efforts to obtain effectiveness with the SEC of an additional Registration Statement or amended Registration Statement required pursuant to Sections 2(a)(ii) or 3(b) of the Registration Rights Agreement, as applicable, or otherwise), or (F) the Company fails to provide a commercially reasonable written response to any comments to any Registration Statement submitted by the SEC within twenty five (25) days of the date that such SEC comments are received by the Company.

  • Equity Conditions Failure means that on any applicable date the Equity Conditions have not been satisfied (or waived in writing by the Holder).

  • Force Majeure Failure has the meaning set forth in Section 8.1(d).

  • Public Information Failure Payments shall have the meaning ascribed to such term in Section 4.3(b).

  • Subproject means a development activity proposed by a Beneficiary under Part A.2 (d) of the Project and financed or to be financed through a Subproject Grant (as hereinafter defined) made out of the proceeds of the Development Credit;

  • Abnormal Market Conditions means conditions contrary to Normal Markets Conditions e.g. when there is low liquidity in the market or rapid price movements in the market or Price Gaps.

  • Extension Minimum Condition means a condition to consummating any Extension that a minimum amount (to be determined and specified in the relevant Extension Request, in the Borrower’s sole discretion) of any or all applicable Classes be submitted for Extension.