Contract Time Requirements definition

Contract Time Requirements means the requirements for the achievement of any major or “Critical” Milestones and Substantial Completion and Final Completion of designated portions of the Work or the entire Work of the Project as may be expressly required in the Project Schedule or any Owner-approved CPM Schedule or as otherwise expressly required by the Contract Documents.
Sample 1Sample 2Sample 3

Examples of Contract Time Requirements in a sentence

  • Notwithstanding the foregoing, with regard to construction services, Contractor shall perform its obligations consistent with any Contract Time Requirements set forth in the Contract Documents.

  • The time periods established by the Contract Time Requirements and the Owner’s Project Schedule requirements shall not be changed without the written consent from the Owner.

  • CM must achieve sufficient progress in the Work to keep on schedule with the timelines and Milestones set out in the Project Schedule in order to ultimately achieve the applicable Contract Time Requirements for the Project and each Work Package.

  • CM shall cause the Work to be constructed in strict accordance with the Contract Documents and within the applicable Contract Time Requirements of the Contract Documents, CM shall award and enter into and manage, as the general contractor, all Subcontracts necessary to provide all labor and materials for the Work.

  • CM shall monitor the Work of the Subcontractors and other work of Owner’s Third Party Contractors in conjunction with the Progress Schedule to ultimately achieve completion of the Work, as designed, at a cost not to exceed the applicable Contract Amount and GMP and within the applicable Contract Time Requirements.

  • However, efforts were being made for reducing out of pocket expenditure, mentoring of service provider on behavioural change and improvement in free transport services through implementation of JSSK.The fact remains that the health workers/doctors could not advocate the benefits of post-natal care to mothers and their attendants.

  • Any such day lost due to adverse weather conditions shall be made up by CM performing work on the ensuing Saturday or by extended hours during that week or with best efforts the ensuing Sunday, and treating such as a work day for the purpose of complying with and meeting CM's Progress Schedule and the applicable Contract Time Requirements, it being understood that no application for extension of time will be made unless the critical path of the project is materially affected.

  • Notwithstanding the foregoing, with regard to the Construction Phase Services, CM shall perform its obligations consistent with any Contract Time Requirements set forth in the Contract Documents.

  • The Contract Time Requirements applicable to the entire Work or a Work Package is subject to adjustments only as provided in the Contract Documents, including Articles 10 -- 12 of the General Conditions.

  • The Milestones made a part of the Contract are critical elements of the Contract Time Requirements under the Contract and are "of the essence" of the Contract.

Related to Contract Time Requirements

  • Minimum Hourly Work Requirement means the work hours over a given time period that are required of you by your Employer in order to be eligible for coverage. Your Minimum Hourly Work Requirement is specified in the Schedule of Benefits.

  • Minimum Requirements means the minimum requirements for available commercial structures. The minimum requirements may be found at this link: https://portlandgeneral.com/energy- choices/renewable-power/green-future-impact The minimum requirements may be updated from time to time to reflect PGE’s criteria from its latest Commission accepted renewable request for proposals.

  • Service Requirements means the specification that the Flexibility Services must be capable of meeting, as defined in Schedule 1;

  • OHS Requirements means all Laws applicable to the Supply and related to occupational health or safety, and all of the City Policies that relate to occupational health or safety, and includes without limitation the WCA;

  • Project Requirements means the statement included in the Request for Proposal detailing the technical and other requirements of Canada which are to be met by the successful Bidder, and which are to be addressed in the Bid;

  • MREL Requirements means the laws, regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities applicable to the Issuer and/or the Group, from time to time, (including any applicable transitional or grandfathering provisions), including, without limitation to the generality of the foregoing, any delegated or implementing acts (such as regulatory technical standards) adopted by the European Commission and any regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities adopted by the Federal Republic of Germany or the Republic of Italy, a relevant resolution authority or the European Banking Authority from time to time (whether or not such requirements, guidelines or policies are applied generally or specifically to the Issuer and/or the Group), as any of the preceding laws, regulations, requirements, guidelines, rules, standards, policies or interpretations may be amended, supplemented, superseded or replaced from time to time.

  • Operational requirements means the need to ensure that the Agency is to be operated as effectively, efficiently and economically as possible.

  • Applicable Requirements means all applicable federal, state and local laws, regulations, rules, ordinances, codes, decrees, judgments, directives, or judicial or administrative orders, permits, licenses, authorizations, approvals and other duly authorized actions of any federal, state, local or other governmental regulatory or administrative agency, court, commission, department, board, or other governmental subdivision, legislature, rulemaking board, tribunal, or other governmental authority having jurisdiction, NYISO, NYSRC and NPCC requirements, and any applicable reliability standards.

  • Minimum Balance Requirements The minimum balance to open the account is $5.00. If the balance falls below $5 at any time, the account may be closed. See Balance Computation Method above. Fees and Charges; Other Requirements: See our Schedule of Fees at xxxxxxx.xxx/xxxx. Dividends: See Disclosures Concerning Dividends above. Current rates are disclosed on the Credit Union’s website.

  • Program Requirements means certain minimum program entry requirements as well as ongoing program requirements, to be fulfilled by Partner, some of which are general PartnerEdge requirements, some of which are specific for the “Sell Engagement” and some of which are specific for the different “Cloud” Product Families, including, without limitation payment of the Program Fee(s), meeting certain minimum annual revenue requirements, upholding a Sell Authorization for at least one “Cloud” Product Family and other requirements as set out in detail in the PartnerEdge Program Guide and the RSPI.

  • Technical Requirements means the Technical Requirements in Section VII of the tendering documents.

  • Environmental and Safety Requirements means all federal, state, local and foreign statutes, regulations, ordinances and similar provisions having the force or effect of law, all judicial and administrative orders and determinations, all contractual obligations and all common law concerning public health and safety, worker health and safety and pollution or protection of the environment, including all such standards of conduct and bases of obligations relating to the presence, use, production, generation, handling, transport, treatment, storage, disposal, distribution, labeling, testing, processing, discharge, release, threatened release, control, or cleanup of any hazardous materials, substances or wastes, chemical substances or mixtures, pesticides, pollutants, contaminants, toxic chemicals, petroleum products or by-products, asbestos, polychlorinated biphenyls (or PCBs), noise or radiation.

  • Rebate Requirement means the amount of arbitrage profits earned from the investment of gross proceeds of Tax-exempt Bonds in nonpurpose investments described in Section 148(f)(2) of the Code and defined as “Rebate Amount” in Section 1.148-3 of the Treasury Regulations, which is payable to the United States at the times and in the amounts specified in such provisions.

  • Relevant Requirements means all applicable Law relating to bribery, corruption and fraud, including the Bribery Act 2010 and any guidance issued by the Secretary of State for Justice pursuant to section 9 of the Bribery Act 2010;

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • Maintenance Requirements shall have the meaning set forth in Clause 14.2;

  • Safety Requirements means Prudent Electrical Practices, CPUC General Order No. 167, Contractor Safety Program Requirements, and all applicable requirements of Law, PG&E, the Utility Distribution Company, the Transmission Provider, Governmental Approvals, the CAISO, CARB, NERC and WECC.

  • End Client Requirements means the specific requirements of the End Client, as notified to the Supplier in writing;

  • essential requirements means all the conditions set out in Annex III which must be met by the rail system, the subsystems, and the interoperability constituents, including interfaces;

  • Design requirements means the written description of the infrastructure facility to be procured pursuant to this article, including:

  • Applicable requirement means all of the following as they apply to emission units in a source requiring an air quality operating permit (including requirements that have been promulgated or approved by the Department or the administrator through rule making at the time of issuance of the air quality operating permit, but have future-effective compliance dates, provided that such requirements apply to sources covered under the operating permit):

  • Insurance Requirements means, collectively, all provisions of the Insurance Policies, all requirements of the issuer of any of the Insurance Policies and all orders, rules, regulations and any other requirements of the National Board of Fire Underwriters (or any other body exercising similar functions) binding upon each Loan Party which is an owner of Mortgaged Property and applicable to the Mortgaged Property or any use or condition thereof.

  • MREL Requirement means the minimum requirement for own funds and eligible liabilities which is or, as the case may be, will be applicable to the Issuer;

  • Pretreatment requirements means any substantive or procedural requirement related to pretreatment, other than a pretreatment standard, imposed on an industrial user.

  • Environmental, Health, and Safety Requirements means all federal, state, local and foreign statutes, regulations, and ordinances concerning public health and safety, worker health and safety, and pollution or protection of the environment, including without limitation all those relating to the presence, use, production, generation, handling, transportation, treatment, storage, disposal, distribution, labeling, testing, processing, discharge, release, threatened release, control, or cleanup of any hazardous materials, substances or wastes, as such requirements are enacted and in effect on or prior to the Closing Date.

  • Performance Requirements The ordering entity reserves the right to inspect and verify that all deliveries are in accordance with specifications, both at the point of delivery and at the point of use. For orders that specify an “authorized party” to receive and inspect deliveries and/or installations, acceptance and inspection procedures must be performed by the” authorized party” to be considered and accepted by the ordering entity. Products inspected at the time of use are subject to refusal and return requirements for issues of quality such as defects in manufacturing and/or workmanship. Products will not be considered accepted by the ordering entity until the installation is complete for the applicable products.