Detection distance definition

Detection distance means the distance measured from the centre of the lens of the camera to the point at which a critical object can just be perceived (as defined by the critical perception).
Sample 1Sample 2Sample 3
Detection distance means the distance measured at ground level from the viewing reference point to the extreme point at which a critical object can just be perceived (the limiting value for a critical perception just barely achieved).
Sample 1Sample 2Sample 3
Detection distance means the distance measured from the centre of the lens of the camera to the point at which a Critical object can just be perceived (as defined by the critical perception).OICA Justification: “detection distance” is used too in annex 12 – 2.1.1 regarding requirement for detection systems.And In annex 12 – 2.1.1, the definition of Detection distance is from ISO that defines the detection area dimensions. It is not the same as in 2.1.9 taken from UN-R46 for CMS. Detection distance in 2.1.9 is used for “critical perception”. Do we really need that definition (that is only used in the communication form) considering that we have requirements of what should be seen in the FoV?Japan Comment: Agreed to remove.
Sample 1Sample 2

Examples of Detection distance in a sentence

  • Detection distance and cluster size should be independent and drawing some scatter plots and calculation of correlation coefficients will test this.

  • Scrollbar for adjusting the Detection distance Adjustment elements for the right side of the detector 1.

  • Detection distance was most variable using the IRT camera, ranging from 4- 50m; this method was associated with the majority of long-distance detections (>15m).

  • Detection distance directionality of wing and thorax was compared as a function of surface area as measured in solid angle.Target strength M for a reference distance of 0.1 m was calculated as: M = 10log10 (Ir/Ii) where Ir and Ii (W m-2) are the returned (measured from 0.32 m and converted to the reference distance of 0.1 m by adding 10.1 dB) and incident sound intensity respectively.

  • Scrollbar for adjusting the Detection distance Operating principle DualCurtain Outdoor is a bidirectional outdoor curtain motion detector that uses IR sensors to identify moving objects with temperatures close to that of the human body.

  • Therefore proper safety photo beams and safety edges must be used in conjunction to the system.4. Detection distance and performance will vary based upon location of each application.

  • Detection distance between Adam and Eva: Recommended distance between Adam and Eva:Minimum distance between two Eden pairs:0–15 mm +/- 2 mm7 mm100 mm Caution! The detection distance can be affected if Eden is mounted close to metal.

  • The Setting Distance for the target object can then be calculated by the following formula: New Setting Distance = (Detection Distance obtained by test with target object) X (Setting Distance of the standard detectable object)/ (Standard Detection distance of the standard detectable object).

  • Detection distance (DD) was considered the distance between the animal and the vehicle when the former detects the vehicle.

  • Detection distance decreases rapidly and significantly as hearing loss increases.


More Definitions of Detection distance

Detection distance means the distance measured at ground level from the centre of the lens of the camera viewing reference point to the extreme point at which a critical object can just be perceived (as defined by the critical perception the limiting value for a critical perception just barely achieved).
Sample 1

Related to Detection distance

  • Leak-detection system means a system capable of detecting the failure of either the primary or secondary containment structure or the presence of a release of hazardous waste or accumulated liquid in the secondary containment structure. Such a system must employ operational controls (e.g., daily visual inspections for releases into the secondary containment system of aboveground tanks) or consist of an interstitial monitoring device designed to detect continuously and automatically the failure of the primary or secondary containment structure or the presence of a release of hazardous waste into the secondary containment structure.

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Interoperability means the ability of a CenturyLink OSS Function to process seamlessly (i.e., without any manual intervention) business transactions with CLEC's OSS application, and vice versa, by means of secure exchange of transaction data models that use data fields and usage rules that can be received and processed by the other Party to achieve the intended OSS Function and related response. (See also Electronic Bonding.)

  • Turbidity means the cloudy condition of water due to the presence of extremely fine particulate materials in suspension that interfere with the passage of light.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • Connectivity means the provision of a Permanent Separated Bicycle Lane system that reflects desired routes between all major origins and destinations in the city.

  • Propagation means the reproduction of Regulated Marijuana plants by seeds, cuttings, or grafting.

  • Net Metering Net metering refers to customers who sell electricity they produce, typically through a rooftop solar panel, back to the utility for credit. If you are a net metering customer, you should not enroll with XOOM because your net metering agreement will not transfer to XOOM once you enroll.

  • Interconnection Feasibility Study means either a Generation Interconnection Feasibility Study or Transmission Interconnection Feasibility Study.

  • Electrical Distance means, for a Generation Capacity Resource geographically located outside the metered boundaries of the PJM Region, the measure of distance, based on impedance and in accordance with the PJM Manuals, from the Generation Capacity Resource to the PJM Region.

  • Network Interface Device or "NID" is a Network Element (including all of its features, functions and capabilities) that includes any means of Interconnection of End User Customer premises wiring to Qwest's distribution plant, such as a cross connect device used for that purpose. "New Service Provider" means the Party to which an End User Customer switches its local Exchange Service or the Party to which an End User Customer is porting its telephone number(s).

  • Backflow prevention device means a safety device used to prevent pollution or contamination of the water supply due to the reverse flow of water from the irrigation system.

  • Working voltage means the highest value of an electrical circuit voltage root-mean-square (rms), specified by the manufacturer, which may occur between any conductive parts in open circuit conditions or under normal operating condition. If the electrical circuit is divided by galvanic isolation, the working voltage is defined for each divided circuit, respectively.

  • Assay means a laboratory analysis of Crude Petroleum to include the following: A.P.I. Gravity, Reid vapor pressure, composition, pour point, water and sediment content, sulfur content, viscosity, distillation, hydrogen sulfide, flash/boiling point and other characteristics as may be required by Carrier.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Sampler means a person who is employed by or is an owner of a licensed laboratory, grower, or processor and is authorized by that employer to collect samples in accordance with the testing laboratory's standard operating procedures and these Rules.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Interface means the mixture occurring in pipeline operations between adjoining batches having similar or dissimilar physical characteristics.

  • Feed means feed as defined in point (4) of Article 3 of Regulation (EC) No 178/2002;

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.

  • Smart Meter means a meter which tells us how much Energy you are using without us having to visit your home and which enables you to see how much Energy you are using;

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Payload means all property to be flown or used on or in a Launch Vehicle.

  • Disinfection profile means a summary of daily Giardia lamblia inactivation through the treatment plant. The procedure for developing a disinfection profile is contained in s. NR 810.32.

  • Compatibility means compatibility as defined in point (10) of Article 2 of Directive (EU) 2019/770;

  • Injection tool means a device used for controlled subsurface injection of radioactive tracer material.