DFC Components definition

DFC Components means a quantity of Repeating Components (RC), Non-Repeating Components (NRC) and Module Components from which a complete Fuel Cell Stack Module may be assembled.
DFC Components means one set of RC and NRC components necessary for the assembly of one complete DFC Module.
DFC Components means a quantity of Repeating Components (RC) and Non-Repeating Components (NRC) from which a complete DFC Module may be assembled. 1.11 “DFC Power Plants” or “DFC Plants” means the complete power plants manufactured by Seller at the facilities of Seller or its sub-vendors, including BOP and DFC Modules. 1.12 “DFC Specifications” means the documents prepared by Seller containing performance specifications for the DFC Plants. 1.13 “DFC Manuals” means the documents normally prepared and routinely provided by Seller which contain, but are not necessarily limited to, instructions for installation, operation, initial start-up, field procedures, instrumentation and controls, and maintenance of the DFC Plants. 1.14 “POSCO Plant” or “Plant” shall mean the carbonate-based fuel cell power plant which is manufactured by Buyer or POSCO Affiliate using the Direct FuelCell® technology of the Seller . 1.15 “Engineer” means the person designated by the Buyer as engineer, with notification of such designation being sent to the Seller, for the purpose of the inspection and testing stipulated in Article 9 hereof, or in absence of such notification, the word Engineer means the Buyer or its duly authorized representatives. 1.16 “Equipment” means the DFC Modules, Repeating Components, Non-Repeating Components, and any machinery, equipment, apparatus, instruments, ship loose items, materials and other items which are supplied by Seller pursuant to this Contract. 1.17 “Facilities” means the connections, interfaces, and supporting equipment for the Plant, including the support system, slab or pedestal on which the Plant is located, fuel supply, electrical distribution system, and equipment connected to the Plant’s interface points but excluding the Plant itself. 1.18 “EXW” or “Ex Works” shall have the meaning assigned as published by the United Nations Commission on International Trade Law in the “International Commercial Terms (INCOTERMS 2000) “ as amended, except as may be otherwise provided herein. 1.19 “Force Majeure” shall mean unforeseen circumstances beyond the reasonable control and without the fault or negligence of either party and which such party is unable to prevent or provide against the exercise of reasonable diligence including, acts of God, any acts or omissions of any civil or military authority, earthquakes, strikes or other labor disturbances, wars (declared or undeclared), terrorist and similar criminal acts, epidemics, civil unrest and riots. 1.20 “Fuel Cell ...

Examples of DFC Components in a sentence

  • In the event the POSCO Plant fails to achieve at least 95% of the guaranteed power output and/or efficiency solely due to the fault of the DFC Module or DFC Components after repeated FA tests, Seller shall notify Buyer in writing of the reason for such failure.

  • The Seller warrants, for a period of eighteen (18) months from the date of EXW shipment, or twelve (12) months from the date of first operation at the installation site, whichever occurs first, that (i) the DFC Modules and DFC Components to be delivered hereunder shall be free from defects in material and workmanship; and (ii) the DFC Modules and DFC Components conform to the DFC Module Specifications and DFC Component Specifications and other requirements set forth in this Contract.

  • The expected MW output rating for the DFC Modules and DFC Components to be sold to Buyer under this Contract is shown in Annex A.

  • If the reason is solely attributable to causes related to DFC Module or DFC Components provided by Seller, then Seller shall have a period of six (6) months from the first FA test to take necessary corrective actions and repeat the FA test to achieve greater than 95% of the guaranteed power output and/or efficiency.

  • For DFC Modules assembled by Buyer and/or POSCO Affiliate from DFC Components supplied by Seller, Buyer shall be responsible to the end user for warranty, performance guarantees, and service obligations related to the DFC Modules.

  • Seller shall prepare an Inspection Report documenting results of the standard pre-shipment factory inspections for DFC Components.

  • For POSCO Modules assembled by POSCO Power and/or POSCO Affiliates from DFC Components supplied by FCE, POSCO Power shall be responsible to the end user for warranty, performance guarantees and service obligations related to the POSCO Modules.

  • One copy of the Inspection Report for each set of DFC Components provided pursuant to this contract shall be supplied to Buyer prior to shipment.

  • The parties shall negotiate in good faith to agree on the standard pre-shipment factory inspection procedures for DFC Components which will be included in the XXXXX.

  • The Seller shall conduct normal and standard inspections of all materials and the workmanship of all DFC Components to be supplied under this Contract in accordance with the standard pre-shipment factory inspection procedures for DFC Components.

Related to DFC Components

  • Bearing components means the bearing element, retainer, inner race, or outer race.

  • Components means articles, materials, and supplies incorporated directly into end products at any level of manufacture, fabrication, or assembly by the Contractor or any subcontractor.

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Class X-A Components The Class A-1 Component, Class A-2 Component, Class A-3 Component, Class A-4 Component, Class A-AB Component and Class A-S Component, each of which constitutes a separate class of “regular interests”, within the meaning of Code Section 860G(a)(1), in the Upper-Tier REMIC with a pass-through rate equal to its Class X Strip Rate from time to time and a notional amount equal to its Component Notional Amount from time to time.

  • Removed Components means components of the Project or portions thereof which the Company or any Sponsor Affiliate in its sole discretion, elects to remove from the Project pursuant to Section 4.04 hereof or as a result of any Condemnation Event.

  • Open-Source Components means any software component that is subject to any open-source copyright license agreement, including any GNU General Public License or GNU Library or Lesser Public License, or other obligation, restriction or license agreement that substantially conforms to the Open Source Definition as prescribed by the Open Source Initiative or otherwise may require disclosure or licensing to any third party of any source code with which such software component is used or compiled.

  • Accrual Components As specified in the Preliminary Statement.

  • Original component manufacturer means an organization that designs and/or engineers a part and is entitled to any intellectual property rights to that part.

  • Basket Componenti means the respective share as specified in § 1 of the Product and Underlying Data.

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • Certified components means components of X-ray systems which are subject to regulations promulgated under Public Law 90-602, the “Radiation Control for Health and Safety Act of 1968,” the Food and Drug Administration.

  • Activated reserve components means members of the reserve component of the uniformed services who have received a notice of intent to deploy or mobilize under Title 10 of the United States Code, Title 32 of the United States Code, or state mobilization to active duty.

  • Corresponding Component As identified in the Preliminary Statement with respect to any Class of Non-Vertically Retained Principal Balance Certificates or Lower-Tier Regular Interest.

  • Class C Component The Component having such designation.

  • Combination Product means any combination of the Product with one (1) or more other active ingredients, products or services that is not the Product, where such products are sold either as a fixed dose/unit or as separate doses/units in a single package for a single price.

  • Combination Products means COBI Combination Products, EVG Combination Products, TDF Combination Products, TAF Combination Products and Quad Product.

  • Third Party Components means software and interfaces, licensed by RIM from a third party for incorporation into a RIM software product, or for incorporation into firmware in the case of RIM hardware products, and distributed as an integral part of that RIM product under a RIM brand, but shall not include Third Party Software.

  • Replacement Product means electric generating capacity, capacity-related benefits, environmental attributes, Energy or other electric products from a generation resource other than the Facility that are provided or delivered to replace or substitute for Contract Capacity or Storage Capacity (or any Capacity-Related Benefit, Environmental Attribute, Other Electric Product, Contract Energy, or Storage Energy associated therewith), in each case, in whole or in part, pursuant to Section 4.6.

  • Blood component means that part of blood separated by physical or mechanical means.

  • Basket Component means each of the SPDR S&P 500 ETF Trust, iShares Russell 2000 Index Fund, iShares MSCI EAFE Index Fund, and iShares MSCI Emerging Markets Index Fund.

  • Principal Component The principal payment plus any interest payments that are either due after the date specified in, or are specified as ineligible for stripping in, the applicable Supplemental Agreement.

  • Critical Component means, in respect of a weapons system referred to in the definition of Prohibited Defense Contract, a component used specifically in the production of the weapon system or plays a direct role in the lethality of the weapon system.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Alternative nicotine product means any noncombustible product containing nicotine that is intended for human consumption, whether chewed, absorbed, dissolved, or ingested by any other means. "Alternative nicotine product" does not include any nicotine vapor product, tobacco product, or product regulated as a drug or device by the U.S. Food and Drug Administration (FDA) under Chapter V (21

  • Milk product or "dairy product" means cottage cheese, dry curd cottage cheese, reduced fat cottage cheese, lowfat cottage cheese, cream, light cream, light whipping cream, heavy cream, heavy whipping cream, whipped cream, whipped light cream, sour cream, acidified sour cream, cultured sour cream, half-and-half, sour half-and-half, acidified sour half-and-half, cultured sour half-and-half, reconstituted or recombined milk and milk products, concentrated milk, concentrated milk products, skim milk, lowfat milk, frozen milk concentrate, flavored milk, eggnog, buttermilk, cultured milk, cultured lowfat milk, cultured skim milk, yogurt, lowfat yogurt, nonfat yogurt, acidified milk, acidified lowfat milk, acidified skim milk, low-sodium milk, low-sodium lowfat milk, low-sodium skim milk, lactose-reduced milk, lactose-reduced lowfat milk, lactose-reduced skim milk, aseptically processed and packaged milk, milk products with added safe and suitable microbial organisms, and any other milk product made by the addition or subtraction of milkfat or addition of safe and suitable optional ingredients for protein, vitamin, or mineral fortification. Unless a product is considered a milk product under this subdivision, milk product does not include dietary products, infant formula, ice cream or other desserts, cheese, or butter. Milk products include the following:

  • Class D Component The Component having such designation.