Engineering Technician - Level IV definition

Engineering Technician - Level IV means an employee who has the level of training skills of a C6 Advanced Engineering Tradesperson Level 1, or the equivalent so as to enable the employee to apply skills within the scope of this level. The skills exercised by the Engineering Technician Level IV are in the technical fields as defined by this award including draughting, planning and technical tasks requiring technical knowledge.
Sample 1Sample 2Sample 3
Engineering Technician - Level IV means an employee who has the level of training skills of a C6 Advanced Engineering Tradesperson Level 1, or the equivalent so as to enable the employee to apply skills within the scope of this level. The skills exercised by the Engineering Technician Level IV are in the technical fields as defined by this award including draughting, planning and technical tasks requiring technical knowledge. At this level the employee is engaged in detail draughting and/or planning and/or technical duties requiring judgement and skill in excess of that required of a technician at C7 under the supervision of technical and/or professional staff. WAGE GROUP: C5 Advanced Engineering Tradesperson - Level II (Relativity to C10 - 130%) Engineering Technician - Level V (Relativity to C10 - 130%) 'Advanced Engineering Tradesperson - Level II' means an:
Sample 1
Engineering Technician - Level IV means an employee who has the level of training skills of a C6 Advanced Engineering Tradesperson Level 1, or the equivalent so as to
Sample 1

Examples of Engineering Technician - Level IV in a sentence

  • An Engineering Technician - Level IV is an employee who has the equivalent level of training of a C6 - Advanced Engineering Tradesperson Level I or equivalent so as to enable the employee to apply skills within the scope of this level.

  • Engineering Technician - Level IV 50% towards an Advanced Diploma of Engineering, or 85% towards a Diploma of Engineering - Technical or equivalent.

  • Engineering Technician - Level IV 50% towards an Advanced Diploma of Engineering, or 85% towards a Diploma of Engineering – Technical or equivalent.

  • Level IV (Senior Engineering Technician)A Transportation Engineering Technician - Level IV is qualified to act as an assistant to a Professional Engineer and to act with authority as delegated by the Professional Engineer in matters in which engineering precedent has been established.

  • He informed Board members that on May 14th students with the Big Red Science and Math program will present before the regular meeting.

Related to Engineering Technician - Level IV

  • Screening Test Technician (STT) means anyone who instructs and assists individuals in the alcohol testing process and operates an ASD.

  • Dual status military technician means a federal civilian employee who is:

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Breath Alcohol Technician (BAT) means an individual who instructs and assists individuals in the alcohol testing process and who operates the EBT.

  • Nail technician means any person who for compensation manicures or pedicures natural nails, or who performs artificial nail services for compensation, or any combination thereof.

  • Engineering Consultant means a person or firm that has the expertise in the engineering aspects of the type of system by which the withdrawn area is receiving service that is necessary to make the determination required under Subsections (5)(f) and (g).

  • Pharmacy technician trainee or “technician trainee” means an individual who is in training to become a pharmacy technician and who is in the process of acquiring national certification as a pharmacy technician as provided in rule 657—3.5(155A).

  • Category 4 Data is data that is confidential and requires special handling due to statutes or regulations that require especially strict protection of the data and from which especially serious consequences may arise in the event of any compromise of such data. Data classified as Category 4 includes but is not limited to data protected by: the Health Insurance Portability and Accountability Act (HIPAA), Pub. L. 104-191 as amended by the Health Information Technology for Economic and Clinical Health Act of 2009 (HITECH), 45 CFR Parts 160 and 164; the Family Educational Rights and Privacy Act (FERPA), 20 U.S.C. §1232g; 34 CFR Part 99; Internal Revenue Service Publication 1075 (xxxxx://xxx.xxx.xxx/pub/irs-pdf/p1075.pdf); Substance Abuse and Mental Health Services Administration regulations on Confidentiality of Alcohol and Drug Abuse Patient Records, 42 CFR Part 2; and/or Criminal Justice Information Services, 28 CFR Part 20.

  • Pharmacy technician or “technician” means a person who is employed in Iowa by a licensed pharmacy under the responsibility of an Iowa-licensed pharmacist to assist in the technical functions of the practice of pharmacy, and who is registered pursuant to 657—Chapter 3, and includes a certified pharmacy technician, a pharmacy technician trainee, and an uncertified pharmacy technician.

  • Technician means an individual determined to be qualified to remove or process parts by an appropriate organization that is licensed, accredited, or regulated under federal or state law. The term includes an enucleator.

  • Clinical nurse specialist means a registered nurse with relevant post-basic qualifications and 12 months’ experience working in the clinical area of his/her specified post-basic qualification, or a minimum of four years’ post-basic registration experience, including three years’ experience in the relevant specialist field and who satisfies the local criteria.

  • Best available control technology (BACT means an emissions limitation (including a visible emission standard) based on the maximum degree of reduction for each pollutant subject to regulation under CAA which would be emitted from any proposed major stationary source or major modification which the Department, on a case-by-case basis, takes into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combustion techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 7 DE Admin. Code 1120 and 1121. If the Department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard, or combination thereof, may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation, and shall provide for compliance by means which achieve equivalent results.

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • Contractor Software means software which is proprietary to the Contractor, including software which is or will be used by the Contractor for the purposes of providing the Services.

  • Digital audio-visual work means a series of related images which, when shown in succession, imparts an impression of motion, together with accompanying sounds, if any.

  • Reasonably Available Control Technology (RACT) means the lowest emission limit that a particular source is capable of meeting by the application of control technology that is reasonably available considering technological and economic feasibility. It may require technology that has been applied to similar, but not necessarily identical source categories.

  • Collaborating physician means the physician who,

  • Engineering Services means infrastructure for –

  • Diagnostic source assembly means the tube housing assembly with a beam-limiting device attached.

  • Baseline Personnel Security Standard means the pre-employment controls for all civil servants, members of the Armed Forces, temporary staff and government contractors generally.

  • Best available control technology or “BACT” means an emissions limitation, including a visible emissions standard, based on the maximum degree of reduction for each regulated NSR pollutant which would be emitted from any proposed major stationary source or major modification which the reviewing authority, on a case-by-case basis, taking into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combination techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 567—subrules 23.1(2) through 23.1(5) (standards for new stationary sources, federal standards for hazardous air pollutants, and federal emissions guidelines), or federal regulations as set forth in 40 CFR Parts 60, 61 and 63 but not yet adopted by the state. If the department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard or combination thereof may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation and shall provide for compliance by means which achieve equivalent results.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Manufacturing Technology means any and all patents, patent applications, know-how, and all intellectual property rights associated therewith that are owned or controlled by Licensor, and including all tangible embodiments thereof, that are necessary or useful for the manufacture of adeno-associated viruses, adeno-associated virus vectors, research or commercial reagents related thereto, Licensed Products, or other products, including manufacturing processes, technical information relating to the methods of manufacture, protocols, standard operating procedures, batch records, assays, formulations, quality control data, specifications, scale up, any and all improvements, modifications, and changes thereto, and any and all activities associated with such manufacture. Any and all chemistry, manufacturing, and controls (CMC), drug master files (DMFs), or similar materials provided to regulatory authorities and the information contained therein are deemed Manufacturing Technology.

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".