EPA Method 8015B definition

EPA Method 8015B means the EPA approved method for determining the concentration of various non-halogenated volatile organic compounds and semi-volatile organic compounds by gas chromatography/flame ionization detector.
Sample 1Sample 2Sample 3
EPA Method 8015B means the EPA approved method for determining the concentration of various non-halogenated volatile organic compounds and semi-volatile organic compounds by gas chromatography/flame ionization detector. The EPA first pub- lished the second revision to the report, SW-846, citing this Method in Ch. 4.3.1, in the South West Region, in December 1996. It is incorporated by reference. The material incorporated by reference does not include any later amendments or editions of the incorporated matter. Copies of these provisions are available at U.S. EPA Region 9, 75 Hawthorne Street, San Francisco, CA 94105, and at the office of the Board of Technical Registration.
Sample 1Sample 2
EPA Method 8015B means the EPA approved method for determining the concentration of various non-
Sample 1

Examples of EPA Method 8015B in a sentence

  • Soil samples exhibiting staining will be analyzed for total petroleum hydrocarbons (TPH) (gas/oil/diesel) using EPA Method 8015B.

  • Methane samples may be analyzed by a GC using modified EPA Method 8015B, EPA Method TO-3, or ASTM 3416M (EPA 3C), or by an appropriate hand-held instrument (e.g., Land Tech Gas Analyzer GA-90, Gas Emissions Monitor GEM-500, GEM-2000).

  • Up to 8 soil samples will be collected and submitted to a California accredited laboratory for the following analysis: • California Accreditation Manual (CAM) 17 metals by EPA Method 6020/200.8, • Volatile organic compounds (VOCs) by EPA Method 8260, • Chlorinated pesticides and polychlorinated biphenyls (PCBs) by EPA Method 608/8082, • Total extractable hydrocarbons by EPA Method 8015B, and • Polyaromatic Hydrocarbons by EPA Method 8270.

  • If the VOC data are being used to support risk assessments or evaluation of vapor intrusion, analyses using either Method TO‐15 or Method SW8260B using a large sample size are needed to achieve sufficient detection limits and quality levels.• Tedlar bags may be used only for the analysis of methane in active vapor by EPA Method 8015B (modified for methane) and will not be used for VOC analysis.

  • Methane samples may be analyzed by a GC using modified EPA Method 8015B, EPA Method TO‐3, ASTM 3416M (EPA 3C), ASTM D1946,or by an appropriate hand‐held instrument (Land Tech Gas Analyzer GA‐90, Gas Emissions Monitor GEM‐500, or GEM‐2000).

  • Soil samples will be analyzed for total petroleum hydrocarbons (TPH) (gas/oil/diesel) using EPA Method 8015B.

  • All sediment samples were analyzed for metals via EPA Method 6010B, mercury via EPA Method 7471A, pesticides and PCBs via EPA Methods 8081A/8082, PCB Congeners via EPA Method 8082, and petroleum hydrocarbons via EPA Method 8015B (E&E, 2011).

  • Soil samples will be submitted to the START subcontracted analytical laboratory and analyzed by the following methods:  SVOCs by SW 846 U.S. EPA Method 8270 VOCs by SW 846 U.S. EPA Method 8260 Dioxins and Furans by SW 846 U.S. EPA Method 8290 Metals by SW 846 U.S. EPA Method 5010B TPH (diesel/oil) by SW 846 U.S. EPA Method 8015B Modified Sample containers, preservatives, holding times, estimated number of field soil samples, and quality control (QC) samples are summarized in Table 5-1.

  • The groundwater sample was sent to Columbia Analytical Services for analysis of total PCBs by EPA Method 8082, total petroleum hydrocarbons by EPA Method 8015B, volatile organic compounds by EPA Method 8260B, polynuclear aromatic hydrocarbons by EPA Method 8270C, total cadmium by EPA Method 6010B, and dissolved lead by EPA Method 7421A (EPA 1998).

  • Soil samples were analyzed for TPH by EPA Method 8015B; V0Cs by EPA Method 8260B; SVOCs by EPA Method 8270C; and chromium, arsenic, selenium, silver, cadmium, barium, mercury and lead (RCRA 8 metals) by EPA Method 6020.

Related to EPA Method 8015B

  • Method Detection Level or “MDL” means the minimum concentration of an analyte (substance) that can be measured and reported with a ninety- nine percent (99%) confidence that the analyte concentration is greater than zero (0) as determined by procedure set forth in 40 CFR 136, Appendix B. The method detection level or MDL is equivalent to the LOD.

  • Method Detection Limit (MDL means the minimum concentration of a substance (analyte) that can be measured and reported with 99 percent confidence that the analyte concentration is greater than zero and is determined from analysis of a sample in a given matrix containing the analyte.

  • Method detection limit means the minimum concentration of a hazardous substance that can be measured and reported with 99% confidence that the analyte concentration is greater than zero and is determined from analysis of a sample in a given matrix that contains the analyte.

  • 2 Wire Analog Voice Grade Loop or “Analog 2W” provides an effective 2-wire channel with 2-wire interfaces at each end that is suitable for the transport of analog Voice Grade (nominal 300 to 3000 Hz) signals and loop-start signaling. This Loop type is more fully described in Verizon Technical Reference (TR)-72565, as revised from time-to-time. If “Customer-Specified Signaling” is requested, the Loop will operate with one of the following signaling types that may be specified when the Loop is ordered: loop-start, ground-start, loop- reverse-battery, and no signaling. Customer specified signaling is more fully described in Verizon TR-72570, as revised from time-to- time. Verizon will not build new facilities.

  • Sxxxxxxx-Xxxxx Certification As defined in Section 11.09.

  • Multiple Bill/Single Tariff means the billing method used when Switched Exchange Access Services is jointly provided by the Parties. As described in the MECAB document, each Party will render a bill in accordance with its own tariff for that portion of the service it provides. Each Party will bill its own network access service rates.

  • Xxxxxxxx-Xxxxx Certification As defined in Section 11.05.

  • Multiple Bill/Single Tariff means the billing method used when Switched Exchange Access Services is jointly provided by the Parties. As described in the MECAB document, each Party will render a bill in accordance with its own tariff for that portion of the service it provides. Each Party will bill its own network access service rates.

  • Xxxxxx Xxx Guide means the Xxxxxx Mae MBS Selling and Servicing Guide, as such Guide may hereafter from time to time be amended.

  • Digital Signal Level 0 (DS-0 means the lowest-level signal in the time division multiplex digital hierarchy, and represents a voice-grade channel operating at either the 56 Kbps or 64 Kbps transmission bit rates. There are twenty-four (24) DS-0 channels in a DS-1.

  • Xxxxxx Xxx Guides The Xxxxxx Xxx Xxxxxxx' Guide and the Xxxxxx Xxx Servicers' Guide and all amendments or additions thereto.

  • Xxxxxxx Xxxxxxx Policy means the written policy of the Company pertaining to the sale, transfer or other disposition of the Company’s equity securities by members of the Board, officers or other employees who may possess material, non-public information regarding the Company, as in effect at the time of a disposition of any Stock.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Statewide popular election means a general election in which votes are cast for

  • Settlement Method Election Date With respect to any Settlement of any Transaction, the 2nd Scheduled Trading Day immediately preceding (x) the Valuation Date for such Transaction, in the case of Physical Settlement, or (y) the First Unwind Date for such Transaction, in the case of Cash Settlement or Net Share Settlement.

  • Xxxxxxx Xxx 0000 means the Xxxxxxx Xxx 0000 and any subordinate legislation made under that Act from time to time together with any guidance or codes of practice issued by the relevant government department concerning the legislation.

  • LOCKHEED XXXXXX means LOCKHEED XXXXXX CORPORATION, acting through its companies or business units as identified on the face of this Contract. If a subsidiary or affiliate of LOCKHEED XXXXXX CORPORATION is identified on the face of this Contract, then "LOCKHEED XXXXXX" means that subsidiary or affiliate.

  • Market Participant Energy Withdrawal means transactions in the Day-ahead Energy Market and Real-time Energy Market, including but not limited to Demand Bids, Decrement Bids, real-time load (net of Behind The Meter Generation expected to be operating, but not to be less than zero), internal bilateral transactions and Export Transactions, as further described in the PJM Manuals.

  • Applied behavior analysis means the design, implementation, and evaluation of environmental modifications, using behavioral stimuli and consequences, to produce socially significant improvement in human behavior, including the use of direct observation, measurement, and functional analysis of the relationship between environment and behavior.

  • Buffer Zone means an area designated to be left along roads or other features in which there will be no cutting.

  • X.X. Xxxxxx shall have the meaning set forth in the preamble.

  • XX Xxxxx “Xxx Xxxxxxx”

  • Procurement Methods means any one of the procurement modes / methods as provided in the Punjab Procurement Rules 2014 published by the Punjab Procurement Regulatory Authority (PPRA), Government of Punjab, as amended from time to time.

  • Sxxxxxxx-Xxxxx means the Sxxxxxxx-Xxxxx Act of 2002.

  • SAP SDK means SAP software development kit that includes tools such as APIs, source code, redistributable files and instructions. “Software” means SAP Group Software as well as Third Party Software.

  • Cathodic protection tester means a person who can demonstrate an understanding of the principles and measurements of all common types of cathodic protection systems as applied to buried or submerged metal piping and tank systems. At a minimum, such persons must have education and experience in soil resistivity, stray current, structure-to-soil potential, and component electrical isolation measurements of buried metal piping and tank systems.