Fire Prevention Inspection definition

Fire Prevention Inspection means an inspection conducted by fire department personnel other than a fire code official as defined herein. This inspection is advisory in nature (i.e. maintenance and housekeeping) by the fire department personnel. This inspection may result in a fire code inspection.

Examples of Fire Prevention Inspection in a sentence

  • Fire Prevention Inspection Policy The Fire Chief presented the Fire Prevention Inspection Policy report, as shown attached to this agenda for this meeting under item 5.2. Amendments proposed to the policy include delegating authority to the Fire Chief to establish a regular system of inspections by moving towards a risk-based inspection system and align with the changes to the Fire Safety Act.

  • Moved by Councillor O’Reilly, seconded by Councillor Bass that the Community Services Committee recommend that Council approve changes to Council Policy No. PS-3, Fire Prevention Inspection Policy.

  • RECOMMENDATION: That Council approve changes to Council Policy No. PS-3, Fire Prevention Inspection Policy.

  • The Office of the State Fire Marshal conducts an annual Fire Prevention Inspection of all buildings on campus in accordance with Title 19 of the California Code of Regulations.

  • The general consensus was one of support by the Village Board for the Fire Prevention Inspection Program as described.

  • As the community continues to change, the document should not become dormant, as the results are only accurate to the time of which the review was conducted.NFPA 1730 – Standard on Organization and Deployment of Fire Prevention Inspection and Code Enforcement, Plan Review, Investigation, and Public Education Operations, notes that this review should be conducted at a minimum every five (5) years or after significant change.

  • In order to achieve this, Fire Services delivers three main services including 24 hour Fire Rescue and Emergency Response, Fire Safety Education and Fire Prevention, Inspection and Enforcement.

  • Provides administrative support to the Director of Fire & Emergency Services for Fire Prevention, Inspection and Public Education Programs.

  • In Section 4, we present an overview of the ChainSoft architecture and in Section 5, we present the evaluation.

  • Enhanced Mobile Fire Prevention Records • As part of the work completed around reviewing processes and documenting business requirements within Fire Prevention (Inspection, Engineering, Investigation and Public Education), TFS partnered with Municipal Licensing & Standards (MLS) in 2018 to address real-time data collection and data reporting needs;• In 2018, business requirements were finalized and a Request For Proposal (RFP) was issued.

Related to Fire Prevention Inspection

  • Installation inspector means a person who, by reason of his knowledge of the physical sciences and the principles of engineering, acquired by a professional education and related practical experience, is qualified to supervise the installation of tank systems.

  • Home inspection means the on-site, physical review of the home of an applicant to assure the applicant and the home meets all health and safety requirements within these rules.

  • Study Site means the location(s) under the control of the Institution where the Study is actually conducted as set out in Schedule 1.

  • Backflow Prevention Assembly means any mechanical assembly installed at a water service line or at a plumbing fixture to prevent a backflow contamination event, provided that the mechanical assembly is appropriate for the identified contaminant at the cross connection and is an in-line field-testable assembly.

  • Invasive species means an alien species whose introduction does or is likely to cause economic or environmental harm or harm to human health.

  • Decontamination means a procedure whereby health measures are taken to eliminate an infectious or toxic agent or matter on a human or animal body surface, in or on a product prepared for consumption or on other inanimate objects, including conveyances, that may constitute a public health risk;

  • The Site, where applicable, means the designated project place(s) named in the bidding document.

  • Onsite means within the Prescribed Premises boundary.

  • Site means the place or places where the permanent Works are to be carried out including workshops where the same is being prepared.

  • Aquatic invasive species means any invasive, prohibited,

  • Waste prevention means source reduction and reuse, but not recycling.

  • Screening means the evaluation process used to identify an individual's ability to perform activities of daily living and address health and safety concerns.

  • Invasive plant species means species of plants not historically found in California that spread outside cultivated areas and can damage environmental or economic resources. Invasive species may be regulated by county agricultural agencies as noxious species. Lists of invasive plants are maintained at the California Invasive Plant Inventory and USDA invasive and noxious weeds database.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Initial inspection means the first on-site inspection of facilities to verify declarations submitted pursuant to Articles III, IV, V and VI and this Annex.

  • Subsurface Borings and Testing means borings, probings and subsurface explorations, laboratory tests and inspections of samples, materials and equipment; appropriate professional interpretations of all the foregoing.

  • Contractor information system means an information system belonging to, or operated by or for, the Contractor.

  • Contractor Project Manager means the employee identified in a Statement of Work as the Contractor project manager.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Contractor System means the information and communications technology system used by the Contractor in performing the Services including the Software, the Contractor Equipment and related cabling (but excluding the Authority System).

  • Busy Line Verification (BLV) means a service whereby an End User requests an operator to confirm the busy status of a line.

  • Jobsite means the immediate work area within the property lines of a single construction project, alteration project, or maintenance project where electrical construction or alteration of electrical wiring is in progress.

  • Improvement completion assurance means a surety bond, letter of credit,

  • Construction Phase Services means the coordination, implementation and execution of the Work required by this Agreement, which are further defined in Article 8.

  • Study Completion means the database for the Study has been locked and all Essential Documents have been provided to the Sponsor, including a copy of the letter from the Reviewing HREC acknowledging receipt of the final report and/or closure letter from the Principal Investigator.

  • Work Site means the site where the Work is being performed.