We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.

For more information visit our privacy policy.

Foot control definition

Foot control means the foot-operated control mechanism designed to be used with a clutch or clutch/brake control system.
Foot control means the foot oper- ated control mechanism designed to be used with a clutch or clutch/brake con- trol system.
Foot control means a foot-operated control mechanism which activates a press.

Examples of Foot control in a sentence

  • Output power 9.5W · Torque 5.5Ncm· Speed 1000 – 40000 rpm· Power Input 160W· Supply Voltage 220 – 240 vac· Rated Current 0.2 to 1.6A, 0.1 to 0.8 A· Operating Mode S6(4/10min)· Noise <55DBA,· Vibration (2.5 m/s²)· Dimension H/W/D· Foot control Without lever 97/253/202mm· Foot control With lever 97/253/275mm· Weight approx 2.5kgs· Chuck diameter 2.35mm· Control element should be separate unit· Reverseable right left rotationd.

  • Foot control jack - Provides power to the optional foot control8.

  • Foot control for variable speed.3.12 Compatible low noise medical grade air compressor to run the machine optimally at the required psi3.13 Irrigation pump should be available.

  • See Additional Requirement (AR) 35 for applicability (https://www.cdc.gov/grants/additionalrequirements/ar-35.html).Funds will be used only to support reporting and dissemination of firearm injuries, and not to support capacity building, training, or other costs associated with onboarding to ESSENCE.

  • Plunger69.F/c Lever short (Inside) F/c means Foot control Page 37 www.hitchcocksmotorcycles.com5.

  • Model holder (with ball-and-socket joint)BSliding blockCClampsDModel pot 31 (3x)EModel pot 52 (2x)FPlate Foot control båÖäáëÜ4.2.3 Calibration parts (included in scope of supply)‌4.2.3.1 3D acquisition system‌Calibration part for calibrating the 3D acquisition system.

  • Foot control.- High quality rear digital camera with a horn and sensor.

  • Foot control shown in Figure 2.8 is used by the dentist to operate the air–rotor and micromotor units.

  • Foot control shall be used for forward and reverse, as well as dynamic braking.


More Definitions of Foot control

Foot control means the water supply is controlled through a mixing valve designed and installed to be operated by the foot.

Related to Foot control

  • Management Control means the possession, directly or indirectly of the power to direct or cause the direction of the management and policies of the Concessionaire, whether through the ownership of voting securities, by contract or otherwise or the power to elect or appoint more than 50% (fifty percent) of the directors, managers, partners or other individuals exercising similar authority with respect to the Concessionaire.

  • Joint Control means a situation where a company has multiple promoters (but none of the shareholders has more than 50% of voting rights and paid up share capital).

  • Quality control means the total of all activities performed by the Design-Builder, Designer, Construction Inspection Professional Engineering Firm and the Materials Testing Firm or Laboratory, subcontractors, producers or manufacturers to ensure that the Work performed by the Design-Builder conforms to the Contract requirements. For design, Quality Control activities shall include, but not be limited to, procedures for design quality, checking, design review including reviews for constructability, and review and approval of Working Plans. For construction, Quality Control activities shall include, but not be limited to, procedures for materials handling and construction quality, inspection, sampling and testing of materials both on site and at the plant(s), field testing of materials, obtaining and verifying Materials Certifications, record keeping, and equipment monitoring and calibration, production process control, and monitoring of environmental compliance. Quality Control also includes documentation of all QC design and construction efforts. The Scope of Work to be performed as part of the Quality Control task may be changed after the RFQ Phase.

  • Joint Controllers means where two or more Controllers jointly determine the purposes and means of processing;

  • PJM Control Area means the Control Area recognized by NERC as the PJM Control Area.

  • Joint Controller with the other Party;

  • Data Controller shall have the same meaning as set out in the Data Protection Act 1998;

  • Medical control means a person who provides medical supervision to an emergency medical service provider.

  • Nutrient management plan means a plan developed or approved by the Department of Conservation and Recreation that requires proper storage, treatment and management of poultry waste, including dry litter, and limits accumulation of excess nutrients in soils and leaching or discharge of nutrients into state waters.

  • Control Area(s) means an electric power system or combination of electric power systems to which a common automatic generation control scheme is applied.

  • Erosion and sediment control plan or "plan" means a document containing material for the conservation of soil and water resources of a unit or group of units of land. It may include appropriate maps, an appropriate soil and water plan inventory and management information with needed interpretations, and a record of decisions contributing to conservation treatment. The plan shall contain all major conservation decisions to ensure that the entire unit or units of land will be so treated to achieve the conservation objectives.

  • Structural pest control means a use requiring a license under Chapter 14 (commencing with Section 8500), Division 3, of the Business and Professions Code.

  • Intensive supervision program means a parole program that

  • Interim controls means a set of measures designed to temporarily reduce human exposure or likely exposure to lead-based paint hazards, including specialized cleaning, repairs, maintenance, painting, temporary containment, ongoing monitoring of lead-based paint hazards or potential hazards, and the establishment and operation of management and resident education programs.

  • Site Control means that Seller (a) owns the Site, (b) is the lessee of the Site under a Lease, (c) is the holder of a right-of-way grant or similar instrument with respect to the Site, or (d) is managing partner or other Person authorized to act in all matters relating to the control and Operation of the Site and Generating Facility.

  • Control Area means an electric power system or combination of electric power systems bounded by interconnection metering and telemetry to which a common automatic generation control scheme is applied in order to:

  • area control service means air traffic control service for controlled flights in control areas;

  • air traffic control service means a service provided for the purpose of:

  • aerodrome control service means air traffic control service for aerodrome traffic;

  • Direct Load Control means load reduction that is controlled directly by the Curtailment Service Provider’s market operations center or its agent, in response to PJM instructions.

  • Virginia Stormwater Management Program or “VSMP” means a program approved by the State Board after September 13, 2011, that has been established by a locality to manage the quality and quantity of runoff resulting from land-disturbing activities and shall include such items as local ordinances, rules, permit requirements, annual standards and specifications, policies and guidelines, technical materials, and requirements for plan review, inspection, enforcement, where authorized in this article, and evaluation consistent with the requirements of this article and associated regulations.

  • Transit-oriented development means infrastructure improvements that are located within 1/2 mile of a transit station or transit-oriented facility that promotes transit ridership or passenger rail use as determined by the board and approved by the municipality in which it is located.

  • Procurement Management means the Director of Lee County’s Procurement Management Department or designee.

  • Services Commencement Date means the date delivery of the Services shall commence as specified in the Key Provisions. If no date is specified in the Key Provisions this date shall be the Commencement Date;

  • Credit Control means all the functions relating to the collection of monies owed by ratepayers and the users of municipal services.

  • Control means the possession, directly or indirectly, of the power to direct or cause the direction of the management or policies of a Person, whether through the ability to exercise voting power, by contract or otherwise. “Controlling” and “Controlled” have meanings correlative thereto.