Functionality Test definition

Functionality Test means a test for automatic line leak detectors which determines whether they are operating correctly.
Sample 1Sample 2Sample 3
Functionality Test means a method for determining that a vehicle has sufficient functionality to be driven on road. Examples of acceptable functionality tests include, but are not limited to: smog check inspections as defined in section 2626(e), or the inspection requirements listed in section 2626(a).
Sample 1Sample 2
Functionality Test means a method for determining that a vehicle has sufficient functionality to be driven on road.(k) “Targeted Vehicle” means a vehicle identified by the Bureau, the Board, or the district to be eligible for a voucher and retirement under the EFMP. These vehicles are identified by probability of being a high polluting vehicle. Targeted vehicles include: all pre-1976 model year vehicles; diesel vehicles; and additional vehicles identified by analysis of the data generated by the Smog Check programs or vehicles identified by other means accepted by the Board, such as remote sensing. Targeted vehicles identified by analysis of emissions data will have a higher probability of high emissions than solicited vehicles; targeted vehicles are a subset of solicited vehicles.
Sample 1Sample 2

Examples of Functionality Test in a sentence

  • A functionality test confirming all systems are working must be completed and a Functionality Test Certificate Number (FTCN) will then be provided by the EM service provider for recording in the fishing log.

  • The Functionality Test procedure also assumes that you are familiar with the Deployment Software as described in the Deployment Wizard section.

  • The use of lot sampling does not eliminate the Contractor’s responsibility that all products delivered to the Government shall meet all performance requirements on the contract and pass a Basic Functionality Test.

  • Longevity stripe(s) may be displayed on the left sleeve of the long sleeve shirt only, the lowest point of the series will bepositioned 4” above the end of the sleeve.

  • If a federally listed species or its critical habitat is encountered on the site of the construction activity, the registrant shall promptly contact the Department and may need to take additional action to ensure that the construction activity does not violate federal law or section 3(b)(2) of the GP.

  • The Court therefore will use both the Code of Ethics and the Functionality Test to ensure that scholarships can still be awarded, granting some members of Student Government access to the scholarship while reducing the ethical ambiguity as much as possible by restricting those with direct authority over the scholarship as ineligible to receive an award.

  • These mice are used for SOP-346 Version 3.0 entitled “In-vivo Functionality Test using a Single Dose AVXS-101 in SMN7 Mouse Model”.

  • Seller shall prepare and submit to Buyer a SCADA Functionality Test procedure no later than 120 days prior to the Scheduled Commercial Operation Date.

  • The captions for the sections and subsections of this Warrant have been inserted for convenience only and shall have no substantive effect.

  • Should the System fail to successfully complete the Functionality Test, the System will be deemed to have failed Acceptance and County will be entitled to a full refund.


More Definitions of Functionality Test

Functionality Test means a method for determining that a vehicle has sufficient functionality to be driven on road.
Sample 1Sample 2
Functionality Test means leak detection systems functionality testing pursuant to Rule 2206- 02 of the Fire Department of the City of NY. The leak detection systems monitoring the underground liquid motor fuel storage systems shall be tested to confirm that all leak detection equipment and associated alarms are in good working order. Functionality Testing shall consist of two (2) stages: 1) Pre-functionality Test; 2) Functionality Test. Refer to Section 7.2 of these Specifications.
Sample 1

Related to Functionality Test

  • functionality means the ability of a tenderer to provide goods or services in accordance with specifications as set out in the tender documents.

  • Service Specification means and include detailed description, statements to technical data, performance characteristics, and standards (Indian as well as) as applicable and as specified in the Contract as well as those specifications relating to Industry standards and codes applicable to the performance of the work, work performance quality and the specifications affecting the works or any additional specification required to be produced by the DCO to meet the design criteria.

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Service Specifications means the following documents, as applicable to the Services under Your order: (a) the Oracle Cloud Hosting and Delivery Policies, the Program Documentation, the Oracle service descriptions, and the Data Processing Agreement described in this Schedule C; (b) Oracle’s privacy policies; and (c) any other Oracle documents that are referenced in or incorporated into Your order. The following do not apply to any non-Cloud Oracle service offerings acquired in Your order, such as professional services: the Oracle Cloud Hosting and Delivery Policies, Program Documentation, and the Data Processing Agreement. The following do not apply to any Oracle Software: the Oracle Cloud Hosting and Delivery Policies, Oracle service descriptions, and the Data Processing Agreement.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Interoperability means the ability of a CenturyLink OSS Function to process seamlessly (i.e., without any manual intervention) business transactions with CLEC's OSS application, and vice versa, by means of secure exchange of transaction data models that use data fields and usage rules that can be received and processed by the other Party to achieve the intended OSS Function and related response. (See also Electronic Bonding.)

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Technical Specifications A specification in a document defining the characteristics of a product or a service, such as the quality levels, the environmental and climate performance levels, the design for all needs, including accessibility for people with disabilities, and the evaluation of conformity, of product performance, of the use of the product, safety or dimensions, as well as requirements applicable to the product as regards the name by which it is sold, terminology, symbols, testing and test methods, packaging, marking or labelling, instructions for use, the production processes and methods at every stage in the life cycle of the supply or service, as well as the evaluation and conformity procedures;

  • QA means Quality Assurance.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • quality (functionality means the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs F.1.4 Communication and employer’s agentEach communication between the employer and a tenderer shall be to or from the employer's agent only, and in a form that can be read, copied and recorded. Writing shall be in the English language. The employer shall not take any responsibility for non-receipt of communications from or by a tenderer. The name and contact details of the employer’s agent are stated in the tender data. F.1.5 The employer’s right to accept or reject any tender offer F.1.5.1 The employer may accept or reject any variation, deviation, tender offer, or alternative tender offer, and may cancel the tender process and reject all tender offers at any time before the formation of a contract. The employer shall not accept or incur any liability to a tenderer for such cancellation and rejection, but will give written reasons for such action upon written request to do so. F.1.5.2 The employer may not subsequent to the cancellation or abandonment of a tender process or the rejection of all responsive tender offers re-issue a tender covering substantially the same scope of work within a period of six months unless only one tender was received and such tender was returned unopened to the tenderer. F.2 Tenderer’s obligations F.2.1 EligibilitySubmit a tender offer only if the tenderer satisfies the criteria stated in the tender data and the tenderer, or any of his principals, is not under any restriction to do business with employer. F.2.2 Cost of tenderingAccept that the employer will not compensate the tenderer for any costs incurred in the preparation and submission of a tender offer, including the costs of any testing necessary to demonstrate that aspects of the offer satisfy requirements. F.2.3 Check documentsCheck the tender documents on receipt for completeness and notify the employer of any discrepancy or omission. F.2.4 Confidentiality and copyright of documentsTreat as confidential all matters arising in connection with the tender. Use and copy the documents issued by the employer only for the purpose of preparing and submitting a tender offer in response to the invitation. F.2.5 Reference documentsObtain, as necessary for submitting a tender offer, copies of the latest versions of standards, specifications, conditions of contract and other publications, which are not attached but which are incorporated into the tender documents by reference. F.2.6 Acknowledge addendaAcknowledge receipt of addenda to the tender documents, which the employer may issue, and if necessary apply for an extension to the closing time stated in the tender data, in order to take the addenda into account. F.2.7 Clarification meetingAttend, where required, a clarification meeting at which tenderers may familiarize themselves with aspects of the proposed work, services or supply and raise questions. Details of the meeting(s) are stated in the tender data. F.2.8 Seek clarificationRequest clarification of the tender documents, if necessary, by notifying the employer at least five working days before the closing time stated in the tender data. F.2.9 InsuranceBe aware that the extent of insurance to be provided by the employer (if any) might not be for the full cover required in terms of the conditions of contract identified in the contract data. The tenderer is advised to seek qualified advice regarding insurance. F.2.10 Pricing the tender offer F.2.10.1 Include in the rates, prices, and the tendered total of the prices (if any) all duties, taxes (except Value Added Tax (VAT), and other levies payable by the successful tenderer, such duties, taxes and levies being those applicable 14 days before the closing time stated in the tender data. F2.10.2 Show VAT payable by the employer separately as an addition to the tendered total of the prices.

  • Design Criteria Package means concise, performance-oriented drawings or specifications for a public construction project. The purpose of the Design Criteria Package is to furnish sufficient information to permit Design-Build Firms to prepare a bid or a response to the District’s Request for Proposals, or to permit the District to enter into a negotiated Design- Build Contract. The Design Criteria Package must specify performance- based criteria for the public construction project, including the legal description of the site, survey information concerning the site, interior space requirements, material quality standards, schematic layouts and conceptual design criteria of the project, cost or budget estimates, design and construction schedules, site development requirements, provisions for utilities, stormwater retention and disposal, and parking requirements applicable to the project. Design Criteria Packages shall require firms to submit information regarding the qualifications, availability, and past work of the firms, including the partners and members thereof.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Compatibility means compatibility as defined in point (10) of Article 2 of Directive (EU) 2019/770;

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Filter profile means a graphical representation of individual filter performance, based on continuous turbidity measurements or total particle counts versus time for an entire filter run, from startup to backwash inclusively, that includes an assessment of filter performance while another filter is being backwashed.

  • S&P CDO Monitor Test A test that will be satisfied on any date of determination (following receipt, at any time on or after the S&P CDO Monitor Election Date, by the Issuer and the Collateral Administrator of the Class Break-even Default Rates for each S&P CDO Monitor input file (in accordance with the definition of “Class Break-even Default Rate”)) if, after giving effect to a proposed sale or purchase of an additional Collateral Obligation, the Class Default Differential of the Highest Ranking Class of the Proposed Portfolio is positive. The S&P CDO Monitor Test will be considered to be improved if the Class Default Differential of the Proposed Portfolio that is not positive is greater than the corresponding Class Default Differential of the Current Portfolio.

  • Brand Name Specification means a specification limited to one or more items by manufacturers’ names or catalogue number.

  • Contract Specifications means the principal trading terms in CFD (for example Spread, Swaps, Lot Size, Initial Margin, Necessary Margin, Hedged Margin, the minimum level for placing Stop Loss, Take Profit and Limit Orders, financing charges, charges etc) for each type of CFD as determined by the Company from time to time. The Contract Specifications appear on the Website.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.