Individual monitoring devices means devices designed to be worn by a single individual for the assessment of dose equivalent. For purposes of these regulations, "personnel dosimeter" and "dosimeter" are equivalent terms. Examples of individual monitoring devices are film badges, thermoluminescent dosimeters (TLDs), pocket ionization chambers, optically stimulated luminescence (OSL) dosimeters and personal air sampling devices.
Monitoring device means the total equipment used to measure and record (if applicable) process parameters.
Individual monitoring means the assessment of:
Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.
Market Monitoring Unit means the consulting or other professional services firm, or other similar entity, retained by the Board, as specified in Section 30.4.2 of Attachment O, that is responsible for carrying out the Core Market Monitoring Functions and the other functions that are assigned to it in Attachment O. The Market Monitoring Unit shall recommend Tariff and market rule changes, but shall not participate in the administration of the ISO’s Tariffs, except as specifically authorized in Attachment O.
Fraud Monitoring System means an off-line administration system that monitors suspected occurrences of ABT- related fraud.
Performance Monitoring System has the meaning given to it in paragraph 1.1.2 in Part B of Schedule 6 (Service Levels, Service Credits and Performance Monitoring);
Prescription monitoring program “PMP,” or “program” means the program established pursuant to 657—Chapter 37 for the collection and maintenance of PMP information and for the provision of PMP information to authorized individuals.
State Level Monitoring Cell means the body constituted by the State Government for the control and elimination of ragging in institutions within the jurisdiction of the State, established under a State Law or on the advice of the Central Government, as the case may be.
Monitoring RTO means the Party that has operational control of a M2M Flowgate.
Secondary dose monitoring system means a system which will terminate irradiation in the event of failure of the primary dose monitoring system.
Monitoring Services shall have the meaning set forth in Section 2(b) of this Agreement.
Primary dose monitoring system means a system which will monitor the useful beam during irradiation and which will terminate irradiation when a pre-selected number of dose monitor units have been delivered.
Monitoring System means a system established by BNY to fulfill the Responsibilities specified in clauses (d) and (e) of Section 1 of Article III of this Agreement.
Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this chapter, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, oxygen or carbon dioxide concentrations), and to record average operational parameter value on a continuous basis.
Monitoring Period means the period from the Launch Date to the Valuation Date (both dates including) at such point in time at which the Reference Price of the Underlying is determined and published..
Continuous monitoring system means the total equipment, required under the emission monitoring section in applicable subsections used to sample and condition (if applicable), to analyze, and to provide a permanent record of emissions or process parameters.
Alcohol Screening Device (ASD) means a breath or saliva device, other than an Evidential Breath Testing Device (EBT), that is approved by the National Highway Traffic Safety Administration and placed on its Conforming Products List for such devices.
S&P CDO Monitor Test A test that will be satisfied on any date of determination (following receipt, at any time on or after the S&P CDO Monitor Election Date, by the Issuer and the Collateral Administrator of the Class Break-even Default Rates for each S&P CDO Monitor input file (in accordance with the definition of “Class Break-even Default Rate”)) if, after giving effect to a proposed sale or purchase of an additional Collateral Obligation, the Class Default Differential of the Highest Ranking Class of the Proposed Portfolio is positive. The S&P CDO Monitor Test will be considered to be improved if the Class Default Differential of the Proposed Portfolio that is not positive is greater than the corresponding Class Default Differential of the Current Portfolio.
Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.
S&P CDO Monitor The dynamic, analytical computer model developed by S&P and used to calculate the default frequency in terms of the amount of debt assumed to default as a percentage of the original principal amount of the Collateral Obligations consistent with a specified benchmark rating level based upon certain assumptions (including the applicable S&P Minimum Weighted Average Recovery Rate) and S&P’s proprietary corporate default studies, as may be amended by S&P from time to time upon notice to the Issuer, the Trustee, the Collateral Manager and the Collateral Administrator. Each S&P CDO Monitor will be chosen by the Collateral Manager (with notice to the Collateral Administrator) and associated with either (x) an S&P Minimum Weighted Average Recovery Rate and an S&P Minimum Weighted Average Floating Spread from Section 2 of Schedule 4 or (y) an S&P Minimum Weighted Average Recovery Rate and an S&P Minimum Weighted Average Floating Spread confirmed by S&P, provided that as of any date of determination the Weighted Average S&P Recovery Rate for the Highest Ranking Class equals or exceeds the S&P Minimum Weighted Average Recovery Rate for such Class chosen by the Collateral Manager and the Weighted Average Floating Spread equals or exceeds the S&P Minimum Weighted Average Floating Spread chosen by the Collateral Manager. The model version of the S&P CDO Monitor is available at xxxxx://xxx.xx.xxxxxxxxxxxxxx.xxx.
Continuous emission monitoring system or "CEMS" means the equipment required under section 11 of this rule to sample, analyze, measure, and provide, by means of readings recorded at least once every fifteen (15) minutes, using an automated data acquisition and handling system (DAHS), a permanent record of nitrogen oxides emissions, stack gas volumetric flow rate, stack gas moisture content, and oxygen or carbon dioxide concentration, as applicable, in a manner consistent with 40 CFR 75*. The following systems are the principal types of continuous emission monitoring systems required under section 11 of this rule:
Phase I Report means, with respect to any Facility, a report that (i) conforms to the ASTM Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process, E 1527, (ii) was conducted no more than six months prior to the date such report is required to be delivered hereunder, by one or more environmental consulting firms reasonably satisfactory to Administrative Agent, (iii) includes an assessment of asbestos-containing materials at such Facility, (iv) is accompanied by (a) an estimate of the reasonable worst-case cost of investigating and remediating any Hazardous Materials Activity identified in the Phase I Report as giving rise to an actual or potential material violation of any Environmental Law or as presenting a material risk of giving rise to a material Environmental Claim, and (b) a current compliance audit setting forth an assessment of Holdings’, its Subsidiaries’ and such Facility’s current and past compliance with Environmental Laws and an estimate of the cost of rectifying any non-compliance with current Environmental Laws identified therein and the cost of compliance with reasonably anticipated future Environmental Laws identified therein.
Project Management Unit and “PMU” each means the Recipient’s unit responsible for the implementation of its Respective Part of the Project referred to in Section I.A.2 of Schedule 2 to this Agreement.
Interim Monitor means any monitor appointed pursuant to Paragraph III of this Order or Paragraph III of the related Order to Maintain Assets.
Tracking device means equipment that records the location, whether directly or indirectly, of Employees, whether by the use of equipment that uses Global Positioning System (GPS) or by another like means.