Lamp control gear definition

Lamp control gear means a device located between the electrical supply and one or more lamps, which provides a functionality related to the operation of the lamp(s), such as transforming the supply voltage, limiting the current of the lamp(s) to the required value, providing a starting voltage and preheating current, preventing cold starting, correcting the power factor or reducing radio interference. The device may be designed to connect to other lamp control gear to perform these functions. The term does not include:
Sample 1Sample 2Sample 3
Lamp control gear means one or more components between the electrical supply and one or more lamps which may serve to transform the supply voltage, limit the current of the lamp(s) to the required value, provide starting voltage and preheating current, prevent cold starting, correct power factor, reduce radio interference and to provide any other functionality related to the operation of the lamp(s);
Sample 1Sample 2
Lamp control gear means a device located between the electrical supply and one or more lamps, which provides a functionality related to the operation of the
Sample 1

Examples of Lamp control gear in a sentence

  • Many district plans around the country have or are currently being reviewed and NZDF has engaged in those review processes to ensure that where training activities might be subject to control through a district plan the controls are, as far as practicable, consistent and that compliance is simply achieved and simply assessed.

  • LED light fittings shall be as per BIS 16101 to BIS 16108: 2012 for General LED lighting terms, Performance, safety requirement, Measurement of Lumens maintenance, Luminaries performance, Photo biological safety of lamp and BIS 15885 (part2/Sec13) for safety of Lamp control gear.

  • Lamp control gear units must be suitable for use with high pressure sodium vapour discharge lamps of the wattages shown on the Drawings and must conform to the requirements of Annexure R151/F.

  • All materials and workmanship of the electronic ballasts are also needed to comply with the safety requirements are based on IEC 61347-2-3, Lamp control gear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps, or its equivalent and/or the Electrical Products (Safety) Regulation of the HKSAR, where applicable.

  • Comparison between measurement of lamp power and maximum allowable power consumption.8. Documentary proof that the participating electronic ballast(s) comply with IEC 61347-2-3, Lamp control gear - Part 2-3 : Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps, and/or the Certificate of Safety Compliance prescribed by the Electrical Products (Safety) Regulation of the Hong Kong Special Administrative Region.

  • Many of the leading domestic manufacturers have such products on the market that fail to comply with the following: 1) Radio disturbance limit standard GB 17743-2007 (IECCISPR 15:2005, idt.);2) Harmonic current limit standard GB 17625.1-2003 (IEC 61000-3-2:2001, idt.);3) Lamp control gear safety standard GB 19510.1-2009 (IEC 61347-1:2007, idt.) Some of these products even bear CCC marks, eventhough they are not within the scope of CCC.

  • Figure 17 - Example of luminaire excluded - RX7s flood lighting Figure 18 - Example of luminaire excluded - T5 lamps luminaire for office lighting Figure 19 - Example of luminaire excluded - MH lamps luminaire for street lighting  Lamp control gear for fluorescent and lamp control gear for HID lamps as they are already covered by the EcoDesign Regulation 245/2009 for tertiary lighting products.

  • Lamp control gear: Particular requirements for DC or AC supplied electronic control gear for LED modules IEC 61347-2-13 9.

  • If this is not possible, water table measurements should be corrected to indicate conditions likely to exist at the time of year when the water table is at its highest point.

  • Revenue budgets will be included in subsequent years’ operating budgets.

Related to Lamp control gear

  • aerodrome control service means air traffic control service for aerodrome traffic;

  • Best available control technology (BACT means an emissions limitation (including a visible emission standard) based on the maximum degree of reduction for each pollutant subject to regulation under CAA which would be emitted from any proposed major stationary source or major modification which the Department, on a case-by-case basis, takes into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combustion techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 7 DE Admin. Code 1120 and 1121. If the Department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard, or combination thereof, may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation, and shall provide for compliance by means which achieve equivalent results.

  • Change of Control of the Company means a change in control of a nature that would be required to be reported in response to Item 5(f) of Schedule 14A of Regulation 14A promulgated under the Securities Exchange Act of 1934 as in effect on the date of this Agreement or, if Item 5(f) is no longer in effect, any regulations issued by the Securities and Exchange Commission pursuant to the Securities and Exchange Act of 1934 which serve similar purposes; provided that, without limitation, such change in control shall be deemed to have occurred if and when (a) any "person" (as such term is used in Sections 13(d) and 14(d)(2) of the Securities Exchange Act of 1934) is or becomes a beneficial owner, directly or indirectly, of securities of the company representing 25% or more of the combined voting power of the company's then outstanding securities or (b) individuals who were members of the Board of Directors of the Company immediately prior to a meeting of the shareholders of the Company involving a contest for the election of directors shall not constitute a majority of the Board of Directors following such election.

  • Control equipment means equipment necessary for the setting and/or unsetting of an immobilizer.

  • air traffic control service means a service provided for the purpose of:

  • Load Control Equipment means the equipment (which may include, but is not limited to, ripple receivers and relays) that is from time to time installed in, over or on Consumer’s Premises for the purpose of receiving signals sent by Load Signalling Equipment and switching on and off, or otherwise controlling, controllable load;

  • Change in Control of the Company means the occurrence of any of the following events:

  • Best available control technology or “BACT” means an emissions limitation, including a visible emissions standard, based on the maximum degree of reduction for each regulated NSR pollutant which would be emitted from any proposed major stationary source or major modification which the reviewing authority, on a case-by-case basis, taking into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combination techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 567—subrules 23.1(2) through 23.1(5) (standards for new stationary sources, federal standards for hazardous air pollutants, and federal emissions guidelines), or federal regulations as set forth in 40 CFR Parts 60, 61 and 63 but not yet adopted by the state. If the department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard or combination thereof may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation and shall provide for compliance by means which achieve equivalent results.

  • Exit Management Date means each of the following:

  • area control service means air traffic control service for controlled flights in control areas;

  • Change in Control of the Corporation means a change in control of a nature that would be required to be reported in response to Item 6(e) of Schedule 14A of Regulation 14A promulgated under the Securities Exchange Act of 1934, as amended ("Exchange Act"), or any successor thereto, whether or not the Corporation is registered under the Exchange Act; provided that, without limitation, such a change in control shall be deemed to have occurred if (i) any "person" (as such term is used in Sections 13(d) and 14(d) of the Exchange Act) is or becomes the "beneficial owner" (as defined in Rule 13d-3 under the Exchange Act), directly or indirectly, of securities of the Corporation representing 25% or more of the combined voting power of the Corporation's then outstanding securities; or (ii) during any period of two consecutive years, individuals who at the beginning of such period constitute the Board of Directors of the Corporation cease for any reason to constitute at least a majority thereof unless the election, or the nomination for election by stockholders, of each new director was approved by a vote of at least two-thirds of the directors then still in office who were directors at the beginning of the period.

  • Interconnection Activation Date means the date that the construction of the joint facility Interconnection arrangement has been completed, trunk groups have been established, joint trunk testing is completed and trunks have been mutually accepted by the Parties.

  • authorized control level RBC means the number determined under the risk-based capital formula in accordance with the RBC instructions;

  • Traffic control signal means a device, whether manually, electrically, or mechanically operated, by which traffic is alternately directed to stop and permitted to proceed.

  • Control Group means the Company and its Affiliates.

  • approach control service means air traffic control service for arriving or departing controlled flights;

  • Reasonably Available Control Technology (RACT) means the lowest emission limit that a particular source is capable of meeting by the application of control technology that is reasonably available considering technological and economic feasibility. It may require technology that has been applied to similar, but not necessarily identical source categories.

  • Fugitive dust emissions means particulate matter from process operations that does not pass through a process stack or vent and that is generated within plant property boundaries from activities such as: unloading and loading areas, process areas, stockpiles, stock pile working, plant parking lots, and plant roads (including access roads and haul roads).

  • Innovative control technology means any system of air pollution control that has not been adequately demonstrated in practice, but would have a substantial likelihood of achieving greater continuous emissions reduction than any control system in current practice or of achieving at least comparable reductions at lower cost in terms of energy, economics, or non-air quality environmental impacts.

  • Automotive hard paste wax means an automotive wax or polish that is:

  • member of the work-related activity group means a person who has or is treated as having limited capability for work under either—

  • Analytical x-ray equipment means equipment used for x-ray diffraction or fluorescence analysis.

  • Overall control efficiency means the efficiency of a control system, calculated as the product of the capture and control device efficiencies, expressed as a percentage.

  • Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Personal watercraft means a vessel that uses an outboard motor or an inboard engine

  • Partnership Change of Control means Tesoro Corporation ceases to Control the General Partner.