Main Metering System definition

Main Metering System means all meter(s) and metering devices owned by the Power Producer and installed at the Delivery point for measuring and recorded the delivery and receipt of energy.
Sample 1Sample 2Sample 3
Main Metering System means all meter(s) and metering devices owned by the Supplier and installed at the Delivery point for measuring and recorded the delivery and receipt of energy.
Sample 1Sample 2Sample 3
Main Metering System means all meter(s) and/or metering devices installed at the Delivery Point for measuring and recording the delivery and receipt of energy;
Sample 1Sample 2Sample 3

Examples of Main Metering System in a sentence

  • The Main Metering System and the Backup Metering System shall be sealed in the presence of representatives of Solar Power Generator and MSEDCL.

  • In the event that the Main Metering System is not in service as a result of maintenance, repairs or testing, then the Backup Metering System/Check Meter shall be used during the period the Main Metering System is not in service and the provisions above shall apply to the reading of the Backup Metering System.

  • Any meter seal(s) shall be broken only by MSEDCL’s representative in the presence of Solar Power Generator’s representative whenever the Main Metering System or the Backup Metering System is to be inspected, tested, adjusted, repaired or replaced.

  • When the Main Metering System and / or Backup Metering System/Check Metering System and / or any component thereof is found to be outside the acceptable limits of accuracy or otherwise not functioning properly, it shall be repaired, re-calibrated or replaced by the Solar Power Generator or MSEDCL at Solar Power Generator’s cost, as soon as possible.

  • The Delivery Point shall be where the Main Metering System is located.

  • In the event of the Main Metering System is not in service for the reason of maintenance, repairs or testing, then the Backup Metering System/Check Meter shall be used during the period for which the Main Metering System is not in service and the provisions above shall apply to the reading of the Backup Metering System.

  • The Purchaser may, at its own discretion, install a check meter, at its cost, to verify the measurements of the Main Metering System.

  • The Main Metering System and the Backup Metering System shall be sealed in the presence of representatives of Solar Power Producer and MSEDCL.

  • The Main Metering System at the Delivery Point and any additional meters required by Applicable Law shall be tested, maintained and owned by the Power Producer.

  • Any meter seal(s) shall be broken only by MSEDCL‟s representative in the presence of Solar Power Producer‟s representative whenever the Main Metering System or the Backup Metering System is to be inspected, tested, adjusted, repaired or replaced.


More Definitions of Main Metering System

Main Metering System means all meter(s) and metering devices owned by the SPD and installed at the Delivery point for measuring and recording the delivery and receipt of energy;
Sample 1Sample 2Sample 3

Related to Main Metering System

  • Net metering system means a facility for the production of electrical energy that does all of the following:

  • smart metering system means an electronic system that can measure energy consumption, providing more information than a conventional meter, and can transmit and receive data for information, monitoring and control purposes, using a form of electronic communication;

  • Metering System means all meters and metering devices (including current transformers and potential transformers) owned by the Company and used to measure Dependable Capacity and the delivery by the Company and receipt by BPDB of Net Energy Output;

  • Plumbing system means water supply distribution and disposal piping on the premises, including appliances and equipment attached thereto, between their connection points to a public or private system.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Net Metering Net metering refers to customers who sell electricity they produce, typically through a rooftop solar panel, back to the utility for credit. If you are a net metering customer, you should not enroll with XOOM because your net metering agreement will not transfer to XOOM once you enroll.

  • Signaling System 7 (SS7) means a signaling protocol used by the CCS Network.

  • Operating System refers to the software that manages Hardware for Programs and other software.

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • Signaling System 7 (SS7 means a signaling protocol used by the CCS Network.

  • Sewer System means pipelines or conduits, pumping stations, force mains, vehicles, vessels, conveyances, injection wells, and all other constructions, devices, and appliances appurtenant thereto used for conducting sewage or industrial waste or other wastes to a point of ultimate disposal or disposal to any water of the state. To the extent that they are not subject to section 402 of the federal Water Pollution Control Act, ditches, pipes, and drains that serve only to collect, channel, direct, and convey nonpoint runoff from precipitation are not considered as sewer systems for the purposes of this part of this division.

  • Gathering System means that portion of Gatherer’s pipeline system, including all appurtenances thereto, related to the provision of gathering and transportation services provided by Gatherer pursuant to this tariff.

  • Interconnection Service means the physical and electrical interconnection of the Customer Facility with the Transmission System pursuant to the terms of Tariff, Part IV and Tariff, Part VI and the Interconnection Service Agreement entered into pursuant thereto by Interconnection Customer, the Interconnected Transmission Owner and Transmission Provider. Interconnection Service Agreement:

  • Supplier System means the information and communications technology system used by the Supplier in performing the Services including the Software, the Equipment and related cabling (but excluding the Customer System);

  • Air Conditioning System Is cooling supplied to all finished rooms? Yes No Unknown Does Not Apply Comments: Is the system in operating condition? Yes No Unknown Does Not Apply Comments:

  • connecting point means the point at which the drainage installation joins the connecting sewer;

  • Filtering facepiece (dust mask) means a negative pressure particulate respirator with a filter as an integral part of the facepiece or with the entire facepiece composed of the filtering medium, not equipped with elastomeric sealing surfaces and adjustable straps.

  • Electric System Upgrades means any Network Upgrades, Distribution Upgrades, or Interconnection Facilities that are determined to be necessary by the CAISO or Participating Transmission Owner, as applicable, to physically and electrically interconnect the Project to the Participating Transmission Owner’s electric system for receipt of Energy at the Point of Interconnection (as defined in the CAISO Tariff) if connecting to the CAISO Grid, or the Interconnection Point, if connecting to a part of the Participating TO’s electric system that is not part of the CAISO Grid.

  • Alarm system means equipment and devices assembled for the purpose of:

  • Metering Point means, for meters that do not use instrument transformers, the point at which the billing meter is connected. For meters that use instrument transformers, the point at which the instrument transformers are connected.