Examples of Octave band in a sentence
Octave band corrections may be employed in meeting the response specification.
Octave band analyzers calibrated in the preferred frequencies (American National Standards Institute Standard S 1.6—1967, Preferred Frequencies and Band Numbers for Acoustical Measurements) shall be used.
Octave band sound pressure levels will be obtained for ambient room conditions with equipment not operating and also with the installed equipment operating per plans and specifications.
Octave band analysis and identification of predominant frequencies of operation.
Octave band analyzer calibrated in the Preferred Frequencies (American Standards Association Sl-6-1960, Preferred Frequencies for Acoustical Measurement) shall be used with Table A.
This number was calculated as follows: Regular vesting after 18 months of service: 18/48ths Additional single-trigger vesting = smaller of (a) 50% of remaining unvested shares or (b) 75% of total shares minus vested shares (in this case, (a) is the smaller number): 15/48ths Total: 33/48ths If you are subject to an involuntary termination (as defined in the 1999 option plan) within 18 months after the change in control, then you would become vested in all of the replacement options.
Octave band LEq and percentiles ambient noise levels were also measured for each area.
Octave band: a band of sound covering a range of frequencies such that the highest frequency is twice the lowest frequency, as defined in ANSI Standard S1.11.One-third octave band: a band of sound covering a range of frequencies such that the highest frequency is the cube root of two times the lowest frequency, as defined in ANSI Standard S1.11.
Octave band Hz 125 Both spectra included in Table 2 will be used in the next section for STI calculations.
Octave band noise levels within residential zones shall not exceed 85 dBLZeq (1 minute) at 63Hz and 75 dB LZeq (1 minute) at 125Hz.