Periodic Test definition

Periodic Test means a group of tests performed at common time intervals required by the authority having jurisdiction.
Sample 1Sample 2Sample 3
Periodic Test test of the network or any other part of it that is conducted in accordance with the provisions of the license, at fixed intervals and at least annually;
Sample 1Sample 2
Periodic Test. Test of the Network, or any portion thereof, that is conducted in accordance with the License provisions, at regular intervals and at least annually;
Sample 1

Examples of Periodic Test in a sentence

  • Periodic Test Report — if enabled, the hub sends test reports with a given period to the CMS (Central Monitoring Station) for additional monitoring of object connection.

  • Wi-Fi — enables event and alarm transmission via Wi-Fi. Periodic Test Report — if enabled, the hub sends test reports with a given period to the CMS (Central Monitoring Station) for additional monitoring of object connection.

  • Wi-Fi — enables event and alarm transmission via Wi-Fi. Periodic Test Report — if enabled, the hub sends test reports with a given period to the CMS (Central Monitoring Station) for additional monitoring of object connection.Monitoring Station Ping Interval — sets the period for sending test messages: from 1 minute to 24 hours.

  • If, after such notice, Producer fails to have a representative present, the Periodic Test will proceed and its results are used until the next similar test.

  • Design and test data updates6.6.8 Handling Structures Operations6.6.8.1 Handling Structures Operating Stan- dardsAll structural lifting beam operations shall meet ANSI B30.20 for Range operations.6.6.8.2 Handling Structures Used to Handle Critical Hardware Periodic Test Requirementsa.

  • At a minimum, handling structures shall be proof load tested to 200 percent of rated load prior to their first operational use at the Ranges.3.6.3.4.4 Handling Structures Used to Handle Non-Critical Hardware Periodic Test Require- ments.

  • This shall include a preliminary version of the operation plan (including human factor aspects), the maintenance plan, the Periodic Test and Inspections Plans.

  • Sling assemblies shall be visually inspected in accordance with ANSI inspection criteria.3.6.3.3.5 Sling Assemblies Used To Handle Non-Critical Hardware Periodic Test Require- ments.

  • The results of the Periodic Test will be stored in the Periodic Test file.

  • Checks of fixed electrical equipment will be carried out in accordance with the relevant regulationsrelating to ‘Fixed Wiring Periodic Test and Inspection’.


More Definitions of Periodic Test

Periodic Test means a random urine drug test for drugs
Sample 1
Periodic Test shall have the meaning set forth in Section 5.6(B). “PFT Notice” shall have the meaning set forth in Section 19.4.
Sample 1

Related to Periodic Test

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Plant Test Date or "PTD" means the date acceptance testing is performed with CLEC. "Point of Interface", "Point of Interconnection," or "POI" is a demarcation between the networks of two (2) LECs (including a LEC and CLEC). The POI is that point where the exchange of traffic takes place.

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • S&P CDO Monitor Test A test that will be satisfied on any date of determination (following receipt, at any time on or after the S&P CDO Monitor Election Date, by the Issuer and the Collateral Administrator of the Class Break-even Default Rates for each S&P CDO Monitor input file (in accordance with the definition of “Class Break-even Default Rate”)) if, after giving effect to a proposed sale or purchase of an additional Collateral Obligation, the Class Default Differential of the Highest Ranking Class of the Proposed Portfolio is positive. The S&P CDO Monitor Test will be considered to be improved if the Class Default Differential of the Proposed Portfolio that is not positive is greater than the corresponding Class Default Differential of the Current Portfolio.

  • Collateral Quality Test means a test that is satisfied if, as of any date of determination, in the aggregate, the Collateral Loans owned (or in relation to a proposed acquisition of a Collateral Loan, both owned and proposed to be owned) by the Borrower satisfy each of the tests set forth below, calculated in each case in accordance with Section 1.3:

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Collateral Quality Tests means the Collateral Quality Tests set out in the Investment Management Agreement being each of the following:

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Borrowing Base Test means as of any date, a determination that (a) the lesser of (i) the Borrowing Base and (ii) the Facility Amount shall be equal to or greater than (b) the Advances Outstanding.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Work week means a seven (7) consecutive day week that consistently begins and ends on the same days throughout the year; i.e. Sunday through Saturday, Wednesday through Tuesday, Friday through Thursday.

  • Critical Test Concentration or "(CTC)" means the specified effluent dilution at which the Permittee is to conduct a single-concentration Aquatic Toxicity Test.

  • Relevant Test Period With respect to any Loan, the relevant test period for the calculation of Net Senior Leverage Ratio, Interest Coverage Ratio, Total Net Leverage Ratio or EBITDA as applicable, for such Loan in accordance with the related Underlying Instruments or, if no such period is provided for therein, (i) for Obligors delivering monthly financial statements, each period of the last twelve (12) consecutive reported calendar months, and (ii) for Obligors delivering quarterly financial statements, each period of the last four (4) consecutive reported fiscal quarters of the principal Obligor on such Loan; provided that with respect to any Loan for which the relevant test period is not provided for in the related Underlying Instruments, if an Obligor is a newly-formed entity as to which twelve (12) consecutive calendar months have not yet elapsed, “Relevant Test Period” shall initially include the period from the date of formation of such Obligor to the end of the twelfth (12th) calendar month or fourth (4th) fiscal quarter (as the case may be) from the date of formation, and shall subsequently include each period of the last twelve (12) consecutive reported calendar months or four (4) consecutive reported fiscal quarters (as the case may be) of such Obligor.

  • DSCR means debt service coverage ratio.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;