Power Producing Facility definition

Power Producing Facility or “PPF” shall mean an electric generating facility, operating less than 60 kilovolts, which will be interconnected and operated in parallel with the City’s Electric Utility System. This shall include any and all related equipment necessary, as determined by the City, for the safe operation and interconnection of the electric generating facilities to the Electric Utility System.
Sample 1Sample 2Sample 3
Power Producing Facility means a solar or wind powered device that generates less than 10 kW of electric power at a voltage of 600 volts or less from an electric customer’s premises in parallel with the City’s Electric Utility System.
Sample 1Sample 2Sample 3

Examples of Power Producing Facility in a sentence

  • For each billing period, the billing statement shall include information indicating the amount of electric energy produced and delivered to the City by the Customer’s Power Producing Facility.

  • Power Producing Facility shall conform to all applicable solar or wind electrical generating system safety and performance standards established by the National Electrical Code (NEC), the Institute of Electrical and Electronic Engineers (IEEE), and accredited testing laboratories such as Underwriters Laboratories, and where applicable, rules of the Public Utility Commission regarding safety and reliability, and applicable building codes.

  • The Power Producing Facility shall not commence parallel operations with the City until written approval of the interconnection facilities has been given by the City.

  • The Customer shall be entitled to a Produced Energy Credit based upon the amount of electric energy produced and delivered to the City by the Customer’s Power Producing Facility during the billing period.

  • The Power Producing Facility shall reimburse the City for any and all losses, damages, claims, penalties, or liability it incurs as a result of the Power Producing Facility’s failure to obtain or maintain any governmental authorizations and permits required for the construction and operation of the Power Producing Facility.

  • Power Producing Facility shall: (a) maintain the facility and interconnection facilities in a safe and prudent manner and in conformance with all applicable laws and regulations including, but notlimited to, those set forth in Exhibit “A” to this Agreement and the PUC Distributed Generation Interconnection Manual; and (b) obtain any governmental authorizations and permits as required for the construction and operation of the Power Producing Facility and interconnection facilities.

  • All calculations under this Section 7 shall be made to the nearest cent or to the nearest one-hundredth of a share, as the case may be, and shall be subject to any proportionate adjustments as contemplated under Section 7(d).

  • The Power Producing Facility shall install and maintain protective apparatus as required by the City, which shall be tested prior to commencing parallel operations.

  • The Power Producing Facility shall be responsible for all expenses associated with the purchase and installation of a dual meter base (when applicable).

Related to Power Producing Facility

  • Generating Facility means the Generating Unit(s) comprising Seller’s power plant, as more particularly described in Section 1.02 and Exhibit B, including all other materials, equipment, systems, structures, features and improvements necessary to produce electric energy and thermal energy, excluding the Site, land rights and interests in land.

  • LNG facility means a terminal which is used for the liquefaction of natural gas or the importation, offloading, and re-gasification of LNG, and includes ancillary services and temporary storage necessary for the re-gasification process and subsequent delivery to the transmission system, but does not include any part of LNG terminals used for storage;

  • Cannabis processing facility means a person that:

  • Power production activities means any business operation that involves a project commissioned by the government of Iran whose purpose is to facilitate power generation and delivery, including, but not limited to, establishing power-generating plants or hydroelectric dams, selling or installing components for the project, providing service contracts related to the installation or maintenance of the project, as well as facilitating such activities, including by providing supplies or services in support of such activities.

  • Vending facility means automatic vending machines, cafeterias, snack bars, cart service, shelters, counters, and such other appropriate auxiliary equipment which may be operated by licensed managers and which is necessary for the sale of newspapers, periodicals, confections, tobacco products, foods, beverages, and other articles or services dispensed automatically or manually and prepared on or off the premises in accordance with all applicable health laws and including the vending or exchange of chances for any lottery authorized by State Law and conducted by an agency of a State within such State. [CFR 34, Part 395.1(X)]

  • Processing facility means an establishment that prepares, treats, or converts tangible personal property into finished goods or another form of tangible personal property. The term includes a business engaged in processing agricultural, aquacultural, or maricultural products and specifically includes meat, poultry, and any other variety of food processing operations. It does not include an establishment in which retail sales of tangible personal property are made to retail customers.

  • Gathering System means that portion of Gatherer’s pipeline system, including all appurtenances thereto, related to the provision of gathering and transportation services provided by Gatherer pursuant to this tariff.

  • Outsourcing facility means a facility that is engaged in the compounding of sterile drugs and is currently registered as an outsourcing facility with the U.S. Secretary of Health and Human Services and that complies with all applicable requirements of federal and state law, including the Federal Food, Drug, and Cosmetic Act.

  • Recycling facility means equipment used by a trade or business solely for recycling:

  • Tanning facility means any premises, building, or part of a building that contains one or more rooms or booths with any of the following:

  • Generating Facilities means Interconnection Customer’s device for the production and/or storage for later injection of electricity identified in the Interconnection Request, but shall not include the Interconnection Customer’s Interconnection Facilities.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per million.

  • Manufacturing Facility means buildings and structures, including machinery and equipment, the primary purpose of which is or will be the manufacture of tangible goods or materials or the processing of such goods or materials by physical or chemical change.

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • Generation Interconnection Facilities Study means a Facilities Study related to a Generation Interconnection Request.

  • Manufacturing Facilities means facilities engaged in the mechanical or chemical transformation of materials or substances into new products and shall include:

  • Micro wireless facility means a small cell facility that is not larger in dimension than 24 inches in length, 15 inches in width, and 12 inches in height and that has an exterior antenna, if any, not longer than 11 inches.

  • Infrastructure facility means a building; structure; or networks of buildings, structures, pipes, controls, and equipment, or portion thereof, that provide transportation, utilities, public education, or public safety services. Included are government office buildings; public schools; courthouses; jails; prisons; water treatment plants, distribution systems, and pumping stations; wastewater treatment plants, collection systems, and pumping stations; solid waste disposal plants, incinerators, landfills, and related facilities; public roads and streets; highways; public parking facilities; public transportation systems, terminals, and rolling stock; rail, air, and water port structures, terminals, and equipment.

  • Power Project or “Project” shall mean the Solar power generation facility of Contracted Capacity of ………..[Insert capacity] MW, located at [Insert name of the place] in …. [Insert name of the District and State] having a separate control system, metering and separate points of injection into the grid at Delivery/Interconnection/Metering point at ISTS substation or in case of sharing of transmission lines, by separate injection at pooling point. This includes all units and auxiliaries such as water supply, treatment or storage facilities; bay/s for transmission system in the switchyard, dedicated transmission line up to the Delivery Point and all the other assets, buildings/structures, equipment, plant and machinery, facilities and related assets required for the efficient and economic operation of the power generation facility; whether completed or at any stage of development and construction or intended to be developed and constructed for the purpose of supply of power as per this Agreement;

  • Pipelines has the meaning set forth in the Recitals.

  • Stand Alone System Upgrade Facilities means System Upgrade Facilities that a Developer may construct without affecting day-to-day operations of the New York State Transmission System during their construction. NYISO, the Connecting Transmission Owner and the Developer must agree as to what constitutes Stand Alone System Upgrade Facilities and identify them in Appendix A to this Agreement.

  • generating plant means the generating facility described in Schedule 1 as amended from time to time;

  • Composting facility means a site, location, tract of land, installation, or building used for composting of solid waste in accordance with Chapter 3734. of the Revised Code and rules adopted thereunder. The composting facility includes the area of materials placement and any leachate management system structures.

  • Transport vehicle means a motor vehicle or rail car used for the transportation of cargo by any mode. Each cargo-carrying body (trailer, railroad freight car, etc.) is a separate transport vehicle.

  • Solar PV Project means the solar Photo Voltaic Power project that uses sunlight for direct conversion into electricity through Photo Voltaic technology.