Pressure Reducing Valve definition

Pressure Reducing Valve means the part of the Service Connection (Private) consisting of a valve located in a Premises within a building which reduces the pressure of Potable Water before it enters the Private System.
Sample 1Sample 2Sample 3
Pressure Reducing Valve means a valve that automatically reduces water pressure between the municipal water system and the inside plumbing in a building;
Sample 1Sample 2Sample 3
Pressure Reducing Valve means a device installed between the Meter and the Water Distribution System to restrict the water pressure to within the high pressure limit specified in Sub-Section 7.6.3. of the Ontario Building Code (OBC);
Sample 1Sample 2

Examples of Pressure Reducing Valve in a sentence

  • A bacteriological sample taken from within the vault piping and tested to indicate the absence of bacteria shall be required prior to placing the Pressure Reducing Valve and Vault on-line.

  • A student can only submit his/her thesis after having acquired at least 60 ECTS (European Credit Transfer System) points.

  • Care should be taken that the cooler avoids blocking throughways, fire exits and heat sources.Coolers should not be placed in direct sunlight or sensitive areas that could result in major damage from leaks i.e. in or above computer room.Is Water Pressure sufficient to operate a POU cooler (see Pressure Reducing Valve, above) – must be over 1 bar for proper flow through filters and tap.The flow direction of water.

  • The Pressure Reducing Valve and Vault shall be: “CORIX” reinforced concrete chamber and “CORIX” prefabricated, integrated piping assembly with valves and fittings, as supplied by isiWest; Telephone No.; 1-970-535-0571.

  • You will need sufficient tubing to connect the cooler to a filter (if using a filter), and sufficient tubing to reach easily from the cooler to the mains water supply connection (saddle valve), and for properly installing any additional units such as Pressure Reducing Valve or Leak Detection devices.

  • Provide a 5 year Pressure Reducing Valve (PRV) test (if applicable).

  • MOTION BY O'DOHERTY, seconded by Pearce, to approve Amendment Number 01 to the Professional Engineering Services Agreement with WWC Engineering for Construction Engineering Services for the Pressure Reducing Valve Replacement – Bill Nye project in the amount of sixty two thousand dollars ( $62,000.00 ) and a contingency of six thousand two hundred dollars ( $6,200.00 ), for a total amount not to exceed sixty eight thousand two hundred dollars ( $68,200.00 ), and authorize the Mayor and City Clerk to sign .

  • When a Supervisor has a reasonable suspicion that an employee is intoxicated or under the influence of drugs or alcohol, or in possession of drugs or alcohol in violation of Section 3 of this policy, the Company may require the employee to go to a medical facility to provide a specimen for laboratory analysis.

  • Pressure Reducing Valve (Water): Diaphragm or bellows operated, spring loaded type, with minimum adjustable range of 28 kPa (4 psig) above and below set point.

  • Pressure Reducing Valve: Shall be set at 12 psi unless otherwise noted on drawings and shall be the size of the cold water make up piping.


More Definitions of Pressure Reducing Valve

Pressure Reducing Valve means an assembly or valve owned by the Municipality that limits the water pressure in an owner’s premises to a level established by the Municipality as being appropriate for service.
Sample 1
Pressure Reducing Valve means an assembly or valve that limits the water pressure in an owner’s premises.
Sample 1
Pressure Reducing Valve means auxiliary equipment furnished, owned, operated, and maintained by the customer which is installed downstream of the City water meter for the purpose of reducing City water supply pressure for residential and commercial building use.
Sample 1
Pressure Reducing Valve means a valve that regulates pressure of hydrogen gas at designated levels.
Sample 1

Related to Pressure Reducing Valve

  • Heating Value means the heat released by combustion of one pound of waste or fuel measured in Btu on an as received basis. For solid fuels, the heating value shall be determined by use of ASTM Standard D2015-66.

  • Closing Value means, as of a particular date, the value of a Share determined by the closing sales price for such Share (or the closing bid, if no sales were reported) as quoted on The New York Stock Exchange for the last market trading day prior to the date of determination, as reported in The Wall Street Journal or such other source as the Administrator deems reliable.

  • Carrying Value means (a) with respect to a Contributed Property, the Agreed Value of such property reduced (but not below zero) by all depreciation, amortization and cost recovery deductions charged to the Partners’ and Assignees’ Capital Accounts in respect of such Contributed Property, and (b) with respect to any other Partnership property, the adjusted basis of such property for federal income tax purposes, all as of the time of determination. The Carrying Value of any property shall be adjusted from time to time in accordance with Sections 5.5(d)(i) and 5.5(d)(ii) and to reflect changes, additions or other adjustments to the Carrying Value for dispositions and acquisitions of Partnership properties, as deemed appropriate by the General Partner.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Positive pressure respirator means a respirator in which the pressure inside the respiratory inlet covering exceeds the ambient air pressure outside the respirator.

  • Diameter at breast height (dbh) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Gross Heating Value means the total heat expressed in megajoules per cubic metre (MJ/m³) produced by the complete combustion at constant pressure of one (1) cubic metre of gas with air, with the gas free of water vapour and the temperature of the gas, air and products of combustion at standard temperature and all water formed by the combustion reaction condensed to the liquid state;

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Ending Value means the average of the values of the Basket at the close of the market on five business days shortly before the maturity date of the Notes. We may calculate the Ending Value by reference to fewer than five or even a single day's closing value if, during the period shortly before the maturity date of the Notes, there is a disruption in the trading of a sufficient number of stocks included in any Basket Index or certain futures or options contracts relating to a Basket Index.

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Psig means pounds per square inch gauge.

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS that operates on a high voltage.

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • Runoff volume means the volume of water that runs off the land development project from a prescribed storm event.

  • Projected Recovery Amount The fair value of the estimated amount of subsequent recoveries, determined by Freddie Mac on the Termination Date, at its sole discretion, on the Credit Event Reference Obligations.

  • SFTR means Regulation (EU) 2015/2365 of the European Parliament and of the Council of 25 November 2015 on transparency of securities financing transactions and of reuse and amending Regulation (EU) No 648/2012;

  • Net Positive Adjustments means, with respect to any Partner, the excess, if any, of the total positive adjustments over the total negative adjustments made to the Capital Account of such Partner pursuant to Book-Up Events and Book-Down Events.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/ ).

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • Liquid trap means sumps, well cellars, and other traps used in association with oil and gas production, gathering, and extraction operations (including gas production plants), for the purpose of collecting oil, water, and other liquids. These liquid traps may temporarily collect liquids for subsequent disposition or reinjection into a production or pipeline stream, or may collect and separate liquids from a gas stream.

  • Meet-Point Billing (MPB means the billing associated with interconnection of facilities between two (2) or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-bill environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • Effluent limitation means any restriction imposed by the Director on quantities, discharge rates, and concentrations of pollutants that are discharged from point sources into waters of the United States, the waters of the contiguous zone, or the ocean.

  • Market Participant Energy Injection means transactions in the Day-ahead Energy Market and Real-time Energy Market, including but not limited to Day-ahead generation schedules, real- time generation output, Increment Offers, internal bilateral transactions and import transactions, as further described in the PJM Manuals.

  • RI Closing Value means, in respect of a Reference Item and a ST Valuation Date, the Settlement Level (as defined in the Equity Linked Conditions) on such ST Valuation Date.

  • MAOP means the maximum allowable operating pressure of the Maui Pipeline or any part of it, as set out in Schedule 6.

  • Salvage value means the amount received for property retired, less any expenses incurred in connection with the sale or in preparing the property for sale, or, if retained, the amount at which the material recoverable is chargeable to materials and supplies, or other appropriate account.