Production Wafer Starts means Wafer Starts for Production Wafers.
Biodiesel means a fuel composed of mono-alkyl esters of long chain fatty acids derived from vegetable oils or animal fats, and, in accordance with standards specified by the American society for testing and materials, designated B100, and meeting the requirements of D-6751, as approved by the department of agriculture.
Manufacturing Site means the facilities where a Compound is Manufactured by or on behalf of a Party, as such Manufacturing Site may change from time to time in accordance with Section 8.7.
Product Specification means a product specification for a Medical Device set out in Schedule 2;
Bulk mixing plant means machinery, appliances or other similar devices that are assembled in such a manner so as to be able to mix materials in bulk for the purposes of using the mixed product for construction work;
Production Area means that part of the animal feeding operation that includes the animal confinement area, the manure storage area, the raw materials storage area, and the waste containment areas. The animal confinement area includes, but is not limited to, open lots, housed lots, feedlots, confinement houses, stall barns, free stall barns, milkrooms, milking centers, egg washing or egg processing areas, areas used for the storage and disposal/treatment of mortalities, cowyards, barnyards, medication pens, walkers, animal walkways, and stables. The manure storage area includes, but is not limited to, lagoons, runoff ponds, storage sheds, stockpiles, under-house or pit storages, liquid impoundments, static piles, and composting piles. The raw materials storage area includes, but is not limited to, feed silos, and silage bunkers. The waste containment area includes, but is not limited to, settling basins and areas within berms and diversions which separate uncontaminated stormwater.
Product Specifications means the specifications, features and/or terms of any "Contract" (as defined in the LME Rules) listed for trading on the LME, as described in the LME Rules;
Bulk Product means Licensed Product supplied in a form other than Finished Product which can be converted into Finished Product.
Contract Quantity means the quantity of Delivered Energy expected to be delivered by Seller during each Contract Year as set forth in the Cover Sheet.
Ethanol means a high octane gasoline blend stock that is used to make various grades of gasoline.
Drug Substance means an active ingredient that is intended to furnish pharmacological activity or other direct effect in the diagnosis, cure, mitigation, treatment, or prevention of disease or to affect the structure or any function of the human body, but does not include intermediates used in the synthesis of such ingredient.
Contract Specifications means the principal trading terms in CFD (for example Spread, Swaps, Lot Size, Initial Margin, Necessary Margin, Hedged Margin, the minimum level for placing Stop Loss, Take Profit and Limit Orders, financing charges, charges etc) for each type of CFD as determined by the Company from time to time. The Contract Specifications appear on the Website.
Feedstock means any controlled substance or new substance that undergoes chemical transformation in a process in which it is entirely converted from its original composition and whose emissions are insignificant,
Harvest batch means a specifically identified quantity of dried flower or trim, leaves, and other cannabis plant matter that is uniform in strain, harvested at the same time, and, if applicable, cultivated using the same pesticides and other agricultural chemicals, and harvested at the same time.
Bulk plant means a motor fuel storage and distribution facility that is not a terminal and from
Bulk drug substance means any substance that is represented for use, and that, when used in the
technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;
Biodiesel fuel means a renewable, biodegradable, mono alkyl ester combustible liquid fuel derived from agricultural plant oils or animal fat such as, but not limited to, soybean oil. For purposes of this definition, “biodiesel fuel” must also meet the specifications of American Society for Testing and Material Specifications (ASTM) D 6751-02, “Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels,” and be registered with the U.S. Environmental Protection Agency as a fuel and a fuel additive under Section 211(b) of the Clean Air Act, 42 U.S.C. Sections 7401, et seq. as amended through November 15, 1990.
Milk means the produce of the milking of one or more cows;
API means the American Petroleum Institute.
Delivery Point means the point(s) of connection(s) at which energy is delivered into the Grid System i.e. the Interconnection Point.
Manufacturing Services means the manufacturing, quality control, quality assurance, stability testing, packaging, and related services, as set forth in this Agreement, required to manufacture Product or Products using the Active Materials, Components, and Xxxx Back Items;
Biodiesel blend means a fuel comprised of a blend of biodiesel fuel with petroleum-based diesel fuel, suitable for use as a fuel in a compression-ignition internal combustion diesel engine.
Finished Product means a cannabis product in its final form to be sold at a retail premises.
Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.
Ex Works means that the seller delivers when it places the goods at the disposal of the buyer at the seller’s premises or at another named place (i.e.,works, factory, warehouse, etc.). The seller does not need to load the goods on any collecting vehicle, nor does it need to clear the goods for export, where such clearance is applicable.
Delivery Points means: (i) for natural gas transported by interstate pipelines, the city gate stations of your Utility, and (ii) for electricity, one or more points at which Company, as your agent, has arranged for the delivery of electricity to a third party (such as your Utility) for your account or at your premises.