Proving Test definition

Proving Test means such test or tests as are prescribed by the specification (s) to be made by the Purchaser or his nominee, after erection at site, before the plant is taken over by the Purchaser;
Sample 1Sample 2Sample 3
Proving Test means the tests, more particularly described in Schedule 5, undertaken in accordance with Clause 6.4;]
Sample 1Sample 2Sample 3
Proving Test means the test described in paragraph 7 of the MOF;
Sample 1Sample 2Sample 3

Examples of Proving Test in a sentence

  • The availability of the Flexible Unit shall be deemed to have been restored if during this period the Provider passes the repeat Proving Test.

  • The Generator must carry out a Proving Test on both the Main Meter and the Check Meter following a change to any of the Key Meter Technical Details (set out in paragraph 6.3(B) above).

  • Where the Metering System has failed the Proving Test, the Generator must undertake a re-test no later than five (5) Business Days after the failed Proving Test in accordance with the timetable set out at paragraph 7.4 of this MOF.

  • The Provider shall make available to the Company the relevant metered data as soon as reasonably practicable but no later than seven (7) days from the date of the Proving Test.

  • Should the Company identify a failure affecting the communications with the Providers Dispatch or Data Provision Equipment the Company may notify the Provider and that it requires a Proving Test in accordance with the requirements set out in Schedule 5.

  • For the CM01 Serial, the CDCA shall collate the following data for each Meter Operator Agent / GSP Group combination:  the number of MSIDs that had a proving test outstanding during the month, i.e. the number of MSIDs where: - scheduled date of the Proving Test < Period End Date - Proving Test completion date was during the month and later than the scheduled date, or the Proving Test is still to be completed.

  • Extended Proving Test / Re-Test Timescales During the P272 Transition Period For MS assigned to Code of Practice 10, the ‘extended’ timescale will be applied to any proving test and subsequent re-test where the original proving test is initiated during the period commencing on 5 November 2015 and ending on the last calendar day before the P272 Implementation Date inclusive.

  • Should the Provider fail to comply with this Clause 9.6, the Company may require the Provider to undertake a Proving Test in accordance with Clause 7.

  • In this case, the Generator must give the CfD Counterparty prior notice before undertaking the initial Proving Test.

  • It can also be submitted by the Registrant of the Metering System.BSCP75/4.2 details the Aggregation Rules for the Primary BM Unit(s) and must be sent to the CDCA at least 20 Working Days before the EFD4.BSCP02 details the Proving Test that your MOA must carry out on the Metering System.


More Definitions of Proving Test

Proving Test means the test(s) in accordance with Clause 7;
Sample 1Sample 2Sample 3
Proving Test means such test or tests as are prescribed by the specification (s) to be made by the Purchaser or his nominee, after erection at site, before the plant is taken over by the Purchaser; 0113. “Purchase Officer” means the officer signing the acceptance of bid and includes any officer who has authority to execute the relevant contract on behalf of the Purchaser; 0114. The “Purchaser” means the President of India acting through the Director/ Stores, Research Designs and Standards Organisation, Ministry of Railways, Manak Nagar, Lucknow-226011, UP, India and includes his successors and assignees. 0115 “Signed” includes stamped, except in the case of an acceptance of bid or any
Sample 1Sample 2Sample 3
Proving Test means such test or tests as are prescribed by the specification(s) to be made by the Purchases or his nominee, after completion of the portal on the designated hosting space , before the portal is taken over by the Purchaser.
Sample 1Sample 2Sample 3
Proving Test means the tests, more particularly described in Error! Reference source not found., undertaken in accordance with Clause 5.4;
Sample 1
Proving Test means such test or tests as are prescribed by the specifications to be made by the Purchaser, or his nominee, after erection at site, before the
Sample 1
Proving Test means the tests, more particularly described in the Service Terms, undertaken in accordance with Clause 6.4;
Sample 1

Related to Proving Test

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Witness test means the Company’s right to witness the commissioning testing and/or Company-required Interconnecting Customer-owned communication system. Commissioning testing is defined in IEEE Standard 1547-2003.

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Cannabis testing facility means an entity registered by

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Incurrence Test means the incurrence test set out in Clause 12.1 (Incurrence Test).

  • Stand-Alone Test Environment or "SATE" shall have the meaning set forth in Section 12.2.9.3.2.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Genetic test means an analysis of human DNA, RNA, chromosomes, proteins, or metabolites, that detect genotypes, mutations, or chromosomal changes. The term “genetic test” does not mean an analysis of proteins or metabolites that does not detect genotypes, mutations, or chromosomal changes; or an analysis of proteins or metabolites that is directly related to a manifested disease, disorder, or pathological condition that could reasonably be detected by a health care professional with appropriate training and expertise in the field of medicine involved.

  • Subproject means a specific project to be carried out by an existing BE utilizing the proceeds of a Sub-loan or Investment, as hereinafter defined, fulfilling the conditions set forth in Part A of Schedule 4 to this Agreement;

  • Coverage Test means each of the Class A/B Par Value Test, the Class A/B Interest Coverage Test, the Class C Par Value Test, the Class C Interest Coverage Test, the Class D Par Value Test, the Class D Interest Coverage Test, the Class E Par Value Test and the Class E Interest Coverage Test.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Performance and Guarantee Test means all operational checks and tests required to determine and demonstrate capacity, efficiency and operating characteristics as specified in the Contract Documents.

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • LCT Test Date shall have the meaning provided in Section 1.12(b).

  • Demonstration project means one of the following projects:

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Phase II Study means a human clinical trial, for which the primary endpoints include a determination of dose ranges and/or a preliminary determination of efficacy in patients being studied as described in 21 C.F.R. § 312.21(b) (FDCA), as amended from time to time, and the foreign equivalent thereof.