Relative Accuracy definition

Relative Accuracy means the absolute mean difference between the gas concentration or emission rate determined by the CEMS and the value determined by the reference method plus the 2.5% error confidence coefficient of a series of tests divided by either the mean of the reference method tests or the applicable emission limit. The 2.5% error confidence shall be determined in accordance with 40 CFR Part 60, Appendix B, Performance Specification 2.
Sample 1Sample 2Sample 3
Relative Accuracy means the absolute concentration(s) determined by the CEMS and
Sample 1
Relative Accuracy means the horizontal accuracy between any two points on the survey where those points define or control the position of a boundary included as part of the survey and is the degree of conformity of a measured or calculated position of a point relative to other points.
Sample 1

Examples of Relative Accuracy in a sentence

  • The test methods in Section B111.B(1) shall be used for all initial compliance tests and all Relative Accuracy Test Audits (RATAs), and shall be used if a permittee chooses to use EPA test methods for periodic monitoring.

  • For CO, the same as specified in PS 4A except that the CEMS calibration must not drift from the reference value of the calibration standard by more than 3 per- cent of the span value on either the high or low range.4.3 Relative Accuracy (RA).

  • The CD specification for each analyzer for which other PSs have been established (e.g., PS 2 for SO2 and NOX), shall be the same as in the applicable PS.13.2 CERMS Relative Accuracy.

  • However, unless Appendix F is required by the NSPS, state law or regulation, or a permit or approval, in lieu of the requirements of 40 C.F.R. Part 60, Appendix F §§ 5.1.1, 5.1.3, and 5.1.4, CountryMark may conduct: (1) either a Relative Accuracy Audit (“RAA”) or a Relative Accuracy Test Audit (“RATA”) once every three (3) years; and (2) a Cylinder Gas Audit (“CGA”) each calendar quarter in which a RAA or RATA is not performed.

  • However, unless Appendix F is required by the NSPS, state law or regulation, or a permit or approval, in lieu of the requirements of 40 C.F.R. Part 60, Appendix F §§ 5.1.1, 5.1.3, and 5.1.4, Western may conduct: (1) either a Relative Accuracy Audit (“RAA”) or a Relative Accuracy Test Audit (“RATA”) once every three (3) years; and (2) a Cylinder Gas Audit (“CGA”) each calendar quarter in which a RAA or RATA is not performed.

  • The CE for the O2 monitor is the average percent O2 difference between the O2 monitor and the certified cylinder gas value for each gas.7.2 Relative Accuracy Test Procedure.

  • However, unless a federal or state regulation or a permit condition otherwise requires compliance with 40 C.F.R. Part 60, Appendix F §§ 5.1.1, 5.1.3, and 5.1.4, for these CEMS, CITGO may conduct: (1) either a Relative Accuracy Audit (“RAA”) or a Relative Accuracy Test Audit (“RATA”) once every three (3) years; and (2) a Cylinder Gas Audit (“CGA”) each calendar quarter in which a RAA or RATA is not performed.

  • The owner/operator ofeach unit shall also submit results of any CEMS performance tests required by 40 CFR part 75 (Relative Accuracy Test Audits, Relative Accuracy Audits, and Cylinder Gas Audits).

  • Quality Assurance and Quality Control (QA/QC): SO2 CEMS Relative Accuracy Test Audit (“RATA”) (1) At least once per calendar year, but not less than six months after the previous RATA, the Permittee shall conduct a CEMS RATA.

  • A CEMS Relative Accuracy Test Audit (RATA) will be performed before the end of each calendar year following permit issuance.

Related to Relative Accuracy

  • Representations and Warranties means the representations and warranties mentioned in Clause 4 hereto;

  • Fundamental Representations and Warranties means the representations and warranties contained in Sections 3.1, 3.2, 3.6, 4.1 and 4.

  • Company Fundamental Representations means the representations and warranties set forth in Section 3.1 (Organization; Authority; Enforceability), Section 3.2(a) (Non-contravention), Section 3.3 (Capitalization), Section 3.13 (Brokerage) and Section 3.20 (Affiliate Transactions).

  • Representations means the written Representations and Warranties provided by Borrower to Silicon referred to in the Schedule.

  • Special Representations has the meaning set forth in Section 8.1.

  • Presentation Date means a day which (subject to Condition 12 (Prescription)):

  • Child find means the program component of IDEA that requires states to find, identify, locate, evaluate, and serve all children with disabilities, from birth to twenty-one years of age. Child find includes:

  • Specified Representations means the representations and warranties of the Borrower and set forth in Sections 5.01(a) (solely as it relates to the Loan Parties), 5.01(b)(ii), 5.02 (other than 5.02(b)), 5.04, 5.12, 5.15, 5.16 (subject to the proviso to Section 4.01(a)(iv)) and 5.20 (limited to the use of proceeds of the Loans on the Closing Date).

  • Purchaser Fundamental Representations means the representations and warranties of Purchaser set forth in Section 4.01, Section 4.02, Section 4.03 and Section 4.07.

  • Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

  • Eligible Representations means those representations identified within the “Tests” included in Schedule B.

  • Company Representations means the representations and warranties of the Company expressly and specifically set forth in Article IV of this Agreement, as qualified by the Schedules. For the avoidance of doubt, the Company Representations are solely made by the Company.

  • Seller Fundamental Representations means the representations and warranties of Seller contained in Section 3.01 (Existence and Power), Section 3.02 (Authorization), Section 3.05 (Group Companies) (other than Section 3.05(e)) and Section 3.21 (Finders’ Fees).

  • Schedule of Representations means the Schedule of Representations and Warranties attached hereto as Schedule B.

  • Warranties - means collectively any and all warranties (if any) given by the Bidder in terms of this agreement.

  • Representation Date shall have the meaning ascribed to such term in Section 4(k).

  • Investor Presentation is defined in Section 5.3.

  • Fundamental Representations has the meaning set forth in Section 8.1.

  • Buyer Fundamental Representations means the representations and warranties of Buyer contained in Sections 6.1, 6.2 and 6.7.

  • Acid rain emissions limitation means, as defined in 40 CFR 72.2*, a limitation on emissions of sulfur dioxide or nitrogen oxides under the acid rain program under Title IV of the Clean Air Act (CAA).

  • Distribution Compliance Period with respect to any Notes, means the period of 40 consecutive days beginning on and including the later of (i) the day on which such Notes are first offered to Persons other than distributors (as defined in Regulation S under the Securities Act) in reliance on Regulation S and (ii) the issue date with respect to such Notes.

  • None means there were not enough English language learners to meet the minimum n-size requirement.

  • Purchaser Warranties shall have the meaning ascribed to the term in Clause 8.1;

  • Parent Fundamental Representations means the representations and warranties of Parent set forth in Section 5.1 (Corporate Existence and Power), Section 5.3 (Corporate Authorization), Section 5.6 (Finders’ Fees), Section 5.7 (Issuance of Shares), and Section 5.8 (Capitalization).

  • Information Page means https://indices.vontobel.com.

  • Monthly Qualification Cycle means a period beginning one (1) Business Day prior to the first day of the current Statement Cycle through one (1) Business Day prior to the close of the current Statement Cycle.