Examples of Safety harness in a sentence
Safety harness (parachute type) shall be used whenever work is performed at a height of 2 meters or higher unless a suitable platform with handrails is provided.
The lap belt/straps and crotch straps should not pass over the sides of the seat, but through it, in order to wrap and hold the pelvic region over the greatest possible surfaceIt is mandatory to have a 5 point Safety harness with 3” shoulder straps, the lap & crutch straps can be either 2” or 3” in width.All seatbelt connection points must be visible and no belts must pass through any firewall.
Safety harness and seat belts must be properly fitted and secure at all times while Club aircraft are in motion on the ground or in the air.
All height workers must use Full Body Safety harness with double lanyards with shock absorber (only).
Personal fall arrest systems consist of the following components: • Full body harness (body wear) • Shock absorbing lanyard or retractable (connecting device) • Tie off point (anchorage) • Training • Safety harness is the only acceptable means of personal fall arrest system permitted on any Webcor/Obayashi project; the use of body belts is not acceptable for fall protection (including positioning systems).
Safety harness must be worn where there is a risk of fall and an appropriate rescue plan must be in place.
Safety helmet and Safety harness/ belt .Provide adequate sanitation/safety facilities for construction workers to ensure the health and safety of the workers during construction, with effective provisions for the basic facilities such as sanitation, drinking water and safety equipments or machinery.
When this kind of equipment is used, the worker must never leave alone.Companies that have to intervene during the assembly and dismantling periods must, among other things, provide their staff with the following individual protection equipment (IPE):• Work clothes,• Gloves adapted to the work,• Safety hard hats compliant with standards,• Safety shoes (reinforced toes + anti-perforation soles),• Safety harness that conforms to standards when the collective protection provisions cannot be implemented.
Safety harness and lanyards shall be worn and adequately secured by any person subject to a fall hazard of more than six (6) feet.
Safety harness to accommodate the size of all employees.All safety equipment required by OSHA for employees’ job descriptionSteel toed boots – the city will reimburse employee up to $150 every two years.Non-prescription(plain) safety glasses.