Sectional Running Times definition

Sectional Running Times means the time period measured from the time a Train Service passes the signal controlling entry into a track section between two relevant specified locations on the Nominated Network to the time the Train Service arrives at the signal controlling entry into the next track section between two relevant specified locations on the Nominated Network, and does not include an allowance for Planned Dwell Times;
Sample 1Sample 2Sample 3

Examples of Sectional Running Times in a sentence

  • The Sectional Running Times to be achieved by coal system Trains are set out in Table 1.2 below: Note: A Diagram illustrating the location of each Section can be found in Schedule 2.

  • They also help to provide more ac- curate Sectional Running Times and offer an increased level of clarity for unexplained delays.In addition to the above, performance regime briefs are regularly given to all GBRf staff, including drivers, ground staff and controllers and all new performance incentives have been introduced with GB Railfreight’s locomotive and wagon maintenance suppliers.All of these will help improve network performance for a large percentage of trains that GB Railfreight runs.

  • Refer to Appendix A for the Sectional Running Times to be achieved by coal system Trains.

  • The Sectional Running Times to be achieved by coal system Trains are set out in Table 1.2 below: Table 1.2 -Sectional Running Times: FromToSectional Running TimeDirection Empty(minutes)Direction Loaded(minutes) Note: A Diagram illustrating the location of each Section can be found in Schedule 2.

  • C.04.01 Exceptions to the TPRsAny margins assumed which are not prescribed by TPRs are mentioned in the body of the report C.05 Timing Load AssumptionsExisting Sectional Running Times (SRT) were assumed to be as contained within the December 2020 BPlan database.

  • Nor do we agree that approval of TfWRL’s proposals should be predicated on the availability of the Class 230s because we are not committing to operate 230s on the new services: 230s are earmarked, but we will retain the right to operate other units including classes 150 and 153 (and which will meet the timetabled class 15x Sectional Running Times).

  • Furthermore, we believe that there is scope to find additional Network capacity through existing mechanisms ranging from the ongoing programme to remove redundant freight paths from the timetable through to working with Network Rail Operational Planning to identify and improve planning rules such as Sectional Running Times (SRTs), Junction Margins and Off Network planning.

  • In formally developing the timetable for 2020 with the Industry, the Timetable Planning Rules (TPR) and Sectional Running Times will need to be refreshed to ensure these reflect planned changes to service levels, rolling stock, infrastructure layout and operational rules procedures.

  • For Train Services with the above characteristics, the average Time at Depot and the Other Dwell Time are as per the following table: The Sectional Running Times to be achieved by coal system Trains are set out in Table 1.2 below: Note: A Diagram illustrating the location of each Section can be found in Schedule 2.

  • However, this principle may not be applied where the MU types are not interchangeable (e.g. due to incompatible braking systems).The Timetable on this route relies on Sectional Running Times based on this clause.

Related to Sectional Running Times

  • Table means the table at the end of this §4a.

  • Maximum Daily Starts means the maximum number of times that a generating unit can be started in an Operating Day under normal operating conditions.

  • Initial compliance period means the three-year compliance period that begins January 1, 1993, except for the MCLs for dichloromethane, 1,2,4-trichlorobenzene, 1,1,2-trichloroethane, benzo(a)pyrene, dalapon, di(2-ethylhexyl)adipate, di(2-ethyl- hexyl)phthalate, dinoseb, diquat, endothall, endrin, glyphosate, hexachlorobenzene, hexachlorocyclopentadiene, oxamyl, picloram, simazine, 2,3,7,8-TCDD, antimony, beryllium, cyanide, nickel, and thallium, as they apply to a supplier whose system has fewer than 150 service connections, for which it means the three-year compliance period that began on January 1, 1996.

  • Contract Minimum Investment Requirement means, with respect to the Project, investment by the Company and any Sponsor Affiliates of at least $4,000,000 in Economic Development Property subject (non-exempt) to ad valorem taxation (in the absence of this Fee Agreement).

  • Normal Minimum Generation means the lowest output level of a generating resource under normal operating conditions.

  • Multiple Listing Service A means for collecting and disseminating information about real property that is or has been for sale, including a means for real estate brokers to make offers of cooperation and compensation to each other. Multiple Listing Services may also include, without limitation, the provision of data processing, technical support, consulting, and other information technology services to real estate brokers and appraisers in connection with the sale and appraisal of real property.

  • Repeat compliance period means any subsequent compliance period after the initial compliance period.

  • Performance References has the meaning set forth for such term in the definition of Derivative Instrument.

  • Three-dimensional reference system means a system as described in Appendix 2 to this annex;

  • Initial Rate of Interest means the initial rate of interest per annum specified as such in the relevant Final Terms;

  • Mean Sea Level means the average height of the sea for all stages of the tide. It is used as a reference for establishing various elevations within the floodplain. For the purposes of this Ordinance, the term is synonymous with the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, to which Base Flood Elevations shown on a community's Flood Insurance Rate Map are referenced.

  • Initial Rate means each rate of interest to be paid in an Initial Period as set forth in the Certificate.

  • Minimum Annual Resource Requirement means, for Delivery Years through May 31, 2017, the minimum amount of capacity that PJM will seek to procure from Annual Resources for the PJM Region and for each Locational Deliverability Area for which the Office of the Interconnection is required under Tariff, Attachment DD, section 5.10(a) to establish a separate VRR Curve for such Delivery Year. For the PJM Region, the Minimum Annual Resource Requirement shall be equal to the RTO Reliability Requirement minus [the Sub-Annual Resource Reliability Target for the RTO in Unforced Capacity]. For an LDA, the Minimum Annual Resource Requirement shall be equal to the LDA Reliability Requirement minus [the LDA CETL] minus [the Sub-Annual Resource Reliability Target for such LDA in Unforced Capacity]. The LDA CETL may be adjusted pro rata for the amount of load served under the FRR Alternative.

  • FILOT Act Minimum Investment Requirement means, with respect to the Project, an investment of at least $2,500,000 by the Company, or of at least $5,000,000 by the Company and any Sponsor Affiliates in the aggregate, in Economic Development Property.

  • Minimum Level (ML means the concentration at which the entire analytical system must give a recognizable signal and an acceptable calibration point. The ML is the concentration in a sample that is equivalent to the concentration of the lowest calibration standard analyzed by a specific analytical procedure, assuming that all the method-specified sample weights, volumes and processing steps have been followed.

  • Compounded Daily XXXXX means the rate of return of a daily compound interest investment (with the daily Sterling overnight reference rate as reference rate for the calculation of interest) and will be calculated by the Interest Determination Agent as at the Interest Determination Date, as follows, and the resulting percentage will be rounded if necessary to the fourth decimal place, with 0.00005 being rounded upwards: where:

  • Two Times Test As to any Distribution Date, (i) the Aggregate Subordinate Percentage is at least two times the Aggregate Subordinate Percentage as of the Closing Date; (ii) the aggregate of the Principal Balances of all Mortgage Loans Delinquent 60 days or more (including Mortgage Loans in REO and foreclosure) (averaged over the preceding six-month period), as a percentage of the aggregate of the Class Certificate Principal Balances of the Subordinate Certificates, does not equal or exceed 50%; and (iii) on or after the Distribution Date in January 2008, cumulative Realized Losses do not exceed 30% of the Original Subordinated Principal Balance or prior to the Distribution Date in January 2008, cumulative Realized Losses do not exceed 20% of the Original Subordinated Principal Balance.

  • Minimum Qualifications means the requirements of education, training, experience and other basic qualifications for a job.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Compounded Daily SONIA means, with respect to an Interest Accrual Period, the rate of return of a daily compound interest investment (with the daily SONIA reference rate as reference rate for the calculation of interest) and will be calculated by the Calculation Agent (or such other party responsible for the calculation of the interest rate, as specified in the applicable Pricing Supplement) on the relevant Interest Determination Date, as follows, and the resulting percentage will be rounded if necessary to the fourth decimal place, with 0.00005 per cent being rounded upwards:

  • Minimum Balance Requirements The minimum balance to open the account is $5.00. If the balance falls below $5 at any time, the account may be closed. See Balance Computation Method above. Fees and Charges; Other Requirements: See our Schedule of Fees at xxxxxxx.xxx/xxxx. Dividends: See Disclosures Concerning Dividends above. Current rates are disclosed on the Credit Union’s website.

  • Distribution Compliance Period with respect to any Notes, means the period of 40 consecutive days beginning on and including the later of (i) the day on which such Notes are first offered to Persons other than distributors (as defined in Regulation S under the Securities Act) in reliance on Regulation S and (ii) the issue date with respect to such Notes.

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Maximum Weekly Starts means the maximum number of times that a generating unit can be started in one week, defined as the 168 hour period starting Monday 0001 hour, under normal operating conditions.

  • Table 2 means Table 2 of the Reporting ITS.

  • Table 3 Material Confirmation Sheet (sample)