Standard FCC definition

Standard FCC means fluid catalytic cracking when the feed has a Conradson carbon level of less than 2.25% by weight.
Sample 1Sample 2Sample 3

Examples of Standard FCC in a sentence

  • Mating plug shall conform to dimensions specified in Federal Standard FCC Part 68F for all respective plug types (6 and 8 position, unshielded/unshielded, keyed/unkeyed etc).

  • These frequencies are not in the Rebanding NPSPAC band (851‐854 MHz), have not been previously licensed or held by Nextel (or any of its subsidiaries), and are on Standard FCC designated channel centers (not offset channels).

  • Standard FCC Part 15 Subpart B:2019, ICES-003 Issue 6TUV Test Procedure MS-0005192LimitClass AEmissions VerificationEmissions Under LimitFrequency Range30MHz – 6 GHzScan #1Pre-scan30 – 1000 MHzAntenna DistanceProject #0234109247Report Date: February 7, 2020Report #31963626.001Rev.

  • Petition for Reconsideration of Trimble Inc., FCC IB Docket No. 11-109, at 3 (May 22, 2020) (“Trimble Petition for Reconsideration”); Garmin Int’l, Written Ex Parte Presentation Regarding Certified Aviation Devices and the 1 dB Standard, FCC IB Docket No. 11-109, at 2 (May 15, 2020) (“Garmin Ex Parte”); see also Comments of Deere & Company, FCC IB Docket No. 11-109, at 2 (June 1, 2020) (“Deere clarifies that it never entered into a ‘co-existence agreement’ with Ligado.”).

  • Test Results: Pass Test Standard: FCC Part 74, FCC Part 90 Test: RF Output Power, FCC §74.861(d)(1), FCC §90.205(d) Performance Criterion: Power must not exceed the following values: FCC Part 74: Licensees may not operate at higher than 1 Watt ERP.FCC Part 90: Power limitation is dependant on the device antenna’s height above average terrain (HAAT) and on the required service area, and will be authorized according to the HAAT table found in FCC §90.205(d) Table 1.

  • Satellite images Figure.1. Standard FCC image of year 1991 Figure.2. Standard FCC image of year 2001 After performing supervised classification, obtained the classification report for all the three images and is as shown in Table 2.

  • Standard: FCC Rules & Regulations, Title 47:2013Part 1 5 paragraph(s): 203, 204, 207, 209 and 247Test specificationsEnvironmental PhenomenaTests sequenceResultPart 15.203Antenna requirements1CompliesPart 15.207Conducted emissions--N.A. (+)Part 15.209Radiated emissions2CompliesPart 15.24 720dB Bandwidth6CompliesPart 15.209 and 15.247Peak Output Power3CompliesPart 15.247Band edge4CompliesPart 15.209Spurious emission5Complies (+) Devices which only employ battery power.

  • Selection and acquisition of data: Standard FCC imagery of IRS/SPOT/ IKONOS/ QUICKBIRD data of kharif and rabi seasons also for study of surface water features.2. Preliminary visual interpretation: Different seasons are interpreted individually making uses of the interpretation keys.

Related to Standard FCC

  • Standard form contract means a financial contract that is substantially not negotiable for the Client, except for the terms contained in point 11.C.

  • Standard Interface means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language.

  • Standard fertility preservation services means procedure based upon current evidence-based standards of care established by the American Society for Reproductive Medicine, the American Society for Clinical Oncology, or other national medical associations that follow current evidence-based standards of care.

  • standard scale means the standard scale contained in section 55 of the Interpretation Act 2015 (of Tynwald)33;

  • Standard Turnover means the turnover achieved between the date of commencement of your business and the date of the damage, converted to the selected indemnity period.

  • Standard Plan means the insurance plan with terms and conditions and the benefit schedule equivalent to the minimum compliant product requirements of VHIS, which are from time to time published and subject to regular review by the Government.

  • Standard Agreement Coversheet refers to the form used by the Judicial Council to enter into agreements with other parties. Several originally signed, fully executed versions of the Standard Agreement, together with the integrated Contract Documents, shall each represent the Agreement as an individual contract counterpart.

  • Standard Amendment Coversheet refers to the form used by the Judicial Council to amend agreements with other parties. Several originally signed, fully executed versions of a Standard Amendment, together with the integrated Contract Documents, shall each represent an Amendment as an individual contract counterpart.

  • Standard Operating Procedures or “SOP” means the procedures as specified in the Annexes or Attachments to the relevant Schedules;

  • Standard Contract means a contract concerning a wholesale energy product admitted to trading at an organised market place, irrespective of whether or not the transaction actually takes place on that market place;

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Standard reference compendia means the American Medical Association Drug Evaluations, the

  • Standard means a document approved by a recognised body, that provides for common and repeated use, rules, guidelines, or characteristics for goods or services, or related processes and production methods, with which compliance is not mandatory. It may also include or deal exclusively with terminology, symbols, packaging, marking, or labelling requirements as they apply to a good, service, process, or production method;

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Standard Services means the standard Services referred to in Schedule 1 (Services) of this Framework Agreement;

  • Standard Software means Software identified as such in Appendix 4 of the Contract Agreement and such other Software as the parties may agree in writing to be Standard Software.

  • CAISO Approved Meter means any revenue quality, electric energy measurement meter furnished by Seller, that (a) is designed, manufactured and installed in accordance with the CAISO’s metering requirements, or, to the extent that the CAISO’s metering requirements do not apply, Prudent Electrical Practices, and (b) includes all of the associated metering transformers and related appurtenances that are required in order to measure the net electric energy output from the Generating Facility.

  • Valuation manual means the manual of valuation instructions adopted by the NAIC as specified in this section or as subsequently amended.

  • Mid-Span Fiber Meet An Interconnection architecture whereby two carriers’ fiber transmission facilities meet at a mutually agreed upon point for the mutual exchange of traffic, subject to the trunking requirements and other terms and provisions of this Agreement. The “point” of Interconnection for purposes of 47 U.S.C §§251(c)(2) and 251(c)(3) remains on CenturyLink’s network and is limited to the Interconnection of facilities between the CenturyLink Serving Wire Center and the location of the CLEC switch or other equipment located within the area served by the CenturyLink Serving Wire Center. Minutes of Use: Shall be abbreviated as MOU. Multiple Exchange Carrier Access Billing (MECAB): The document prepared by the Billing Committee of the Ordering and Billing Forum (OBF), which functions under the auspices of the Carrier Liaison Committee (CLC) of the Alliance for Telecommunications Industry Solutions (ATIS). The currently effective version of the MECAB document, published by ATIS (0401004-00XX), contains the recommended guidelines for the billing of an Access Service provided by two or more LECs, or by one LEC in two or more states within a single LATA. National Emergency Number Association (NENA): A not-for-profit corporation established in 1982 to further the goal of “One Nation-One Number” for emergency calls. NENA is a networking source and promotes research, planning, and training. NENA strives to educate, set standards and provide certification programs, legislative representation and technical assistance for implementing and managing 911 systems.

  • Standard operating procedure means a formal written procedure offi- cially adopted by the plant owner or operator and available on a routine basis to those persons responsible for carrying out the procedure.

  • Yard, Front means a yard extending across the full width of the lot between the Front Lot Line of the lot and the nearest part of the nearest building or structure on the lot.

  • Staff Vetting Procedures means the Authority’s procedures for the vetting of personnel and as advised to the Contractor by the Authority.

  • Training Contract means an agreement signed by the employer and the Apprentice or Trainee (and a parent or guardian if applicable), in accordance with the Act and Regulatory requirements.

  • Large Facility Interconnection Procedures or “LFIP”) shall mean the interconnection procedures applicable to an Interconnection Request pertaining to a Large Generating Facility that are included in Attachment X of the NYISO OATT. Standard Large Generator Interconnection Agreement (“LGIA”) shall mean this Agreement, the form of interconnection agreement applicable to an Interconnection Request pertaining to a Large Generating Facility, that is included in Attachment X of the NYISO OATT. System Deliverability Upgrades shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to Byways and Highways and Other Interfaces on the existing New York State Transmission System and Distribution System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard at the requested level of Capacity Resource Interconnection Service. System Protection Facilities shall mean the equipment, including necessary protection signal communications equipment, required to (1) protect the New York State Transmission System from faults or other electrical disturbances occurring at the Large Generating Facility and (2) protect the Large Generating Facility from faults or other electrical system disturbances occurring on the New York State Transmission System or on other delivery systems or other generating systems to which the New York State Transmission System is directly connected. System Upgrade Facilities shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff shall mean the NYISO Open Access Transmission Tariff (“OATT”), as filed with the Commission, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Developer is engaged in on-site test operations and commissioning of the Large Generating Facility prior to Commercial Operation.

  • commercial air transport means an aircraft operation involving the transport of passengers, cargo, or mail for remuneration or hire.

  • Common Billing Agreement means an agreement between the Appointee and any other person under which that person has undertaken to pay, on terms agreed between them, charges for water supply or sewerage services, or both, in respect of two or more Houses which have a common Supply Pipe and which, in any case where that agreement relates to one of those services only, are also subject to a similar agreement for common billing between that person and the undertaker providing the other service;